No video
DIY Angel Eye Installation | Mazda 3 | Series Finale | S02E16
Рет қаралды 39,924
Күн бұрынThis is the series finale featuring a modification that totally changes the look of your car. The guys manage to find a unique way to make the Mazda 3 have BMW-like DRLs, and this is how they did it!
★★ Liked This Video? Then Click Like & Subscribe! It's Free! ★★
➔ Turbo Around The Web:
✓ - Official Website - www.turbonetwor...
✓ - Facebook - / turboautos
✓ - Twitter - / turboautos
✓ - Donation - www.patreon.com...
✓ - Clothing Line - shop.turboautos...
➔ MUSIC:
Neuro Rhythm by Aaron Spencer
machinimasound...
Licensed under Creative Commons Attribution 4.0 International
(creativecommons...)
Milkshake by Aaron Spencer
machinimasound...
Licensed under Creative Commons Attribution 4.0 International
(creativecommons...)
Summer Rain by Jens Kiilstofte
machinimasound...
Licensed under Creative Commons Attribution 4.0 International
(creativecommons...)
➔ INTRO MUSIC:
Tritonal - Now Or Never (feat. Phoebe Ryan) (SDDx's Electro Bootleg)
/ tritonal-now-or-never-...
➔ PLEASE READ:
We're two normal guys and are not trained mechanics! We make these videos so you know what is possible with modifying a car. If you are unsure of what to do, please consult a qualified mechanic. We will not be held responsible for any injury caused to yourself, someone else or your car. Please also check with insurers that what you're doing is covered before undertaking any mod. We do our best to cover each mod in as much detail as possible but sometimes we may miss out a step. Thanks for reading this, please SUBSCRIBE because you're awesome.
@LifeOfTuners 2 жыл бұрын
Why does noone show the wiring :(
@raydeo3181 4 жыл бұрын
How did you wire them lights?
@SidSmithgopro 9 жыл бұрын
Looks good. Its nice that they are still the stock unit, but better. Can't wait until the new series in the new year. All the best of luck on getting to 1000 subscribers by june.
@TurboautosCoUk 9 жыл бұрын
Thanks! It looks totally different on the road too, in a good way. This next series will be bigger and better than anything that has been before so we are very excited! [James]
@sERKdaDON 8 жыл бұрын
Music is so loud, can't even hear you talk. You should invest in a mic you can clip onto your shirt if you haven't done so already.
@TurboautosCoUk 8 жыл бұрын
All current videos are filmed with clip mics with a condenser to make for better audio. Back when this was filmed we were only using the microphones built into the camera, but we hadn't had as much practice with the editing software. The edits now are much clearer for audio :)
@far.q1370 2 ай бұрын
What wires or light did you connect the Halos to ?
@user-vu3dl9re7s 11 ай бұрын
would a E43 angel light work as well for the Mazda 3?
@EllieDeeLight 9 жыл бұрын
How do you make sure no moisture gets in the headlights? I heard this is kind of a pain in the ass project but I want angel eyes like this so badly for my mazda 3
@TurboautosCoUk 9 жыл бұрын
Your right about it being a paint in the ass project! Took around 3 days to complete from taking apart the headlight to installing back in the car.. To make sure you have no moisture you just need to seal any holes you create completely and also reseal the main seal using new sealant. We thought we had sealed both correctly, but with it now being winter and wet, we have found that 1 headlight has severe moisture build up on the inside meaning we are going to have to take it apart again to reseal. If you wanted, we could try film a video on how to reseal properly if you wish? But, if you have the patience and the time to do this mod without having your car on the road, its 100% worth doing!
@EllieDeeLight 9 жыл бұрын
Oh yeah I'll have to wait it out for a bit until summer haha but thanks so much for the help! I love your videos keep it up!
@ledmk2 9 жыл бұрын
Nice install
@noahratajczak2249 3 жыл бұрын
Have you got a link for those lights
@RichardsSam1997 8 жыл бұрын
when heating the headlight in the oven, does it matter if the headlight is plastic or glass as I'd worry about melting it?
@TurboautosCoUk 8 жыл бұрын
The Mazda was plastic. Keep a very close eye on it if you carry out the mod. Someone actually did manage to melt theirs after watching this video, but keep it in the oven for short intervals and try breaking the seal. You should be just fine, just be VERY careful :)
@s1d3k1ckRO 7 жыл бұрын
Instead of putting your precious unit in the oven just leave the car in the sun if it's really hot outside, or use a heated air gun.
@TurboautosCoUk 7 жыл бұрын
s1d3k1ckRO It was December with temperatures of sub zero and we didn't have a heat gun!! Still don't in fact come to think about it... Shall add that to the list... Oven did the job though, just needed to keep a close eye on it lol
@Mcknze4r 8 жыл бұрын
i have a mazda 3 1.6 ts d, i am looking to complete this mod, i dont want to open it without knowing the size of the angel eyes i need, can you let me know what size i would need for the Mazda 3 2005. thanks !
@TurboautosCoUk 8 жыл бұрын
+Maruf Ahmed When we purchased our ones from eBay, they had different listings for different cars, and we just selected the one for the mk1 Mazda 3 TS2. We cannot find the original listing, but they stock parts for most makes and models :)
@ikawtubo Жыл бұрын
Nice DIY video! What are the sizes in mm of each eye?
@reidaugust6985 4 жыл бұрын
Music is too loud
@Harzman01 9 жыл бұрын
what does it look like on the car?
@TurboautosCoUk 9 жыл бұрын
turboautos.co.uk/data/AngelEyesTurboAutos.png
@jarod645 8 жыл бұрын
You guys melted my headlight unit. Are you sure it isn't 200 degrees Fahrenheit?
@TurboautosCoUk 8 жыл бұрын
+Jarod645 We are sorry to hear that your unit melted, however we did say that times do vary so to keep an eye on it and do not leave it unattended. Ours honestly were in the oven for 15 mins at 200 degrees centigrade each time as was said in the video. There will always be variations, even with the same manufacturer - different amounts of the glue / resin could have been used by different workers etc. For the Clio, we found ourselves taking the units out sooner than the 15 mins we had it in for the Mazda - it always varies. Again, we truly are sorry to hear about your headlight unit, but as you will see in every episode's description we hold no responsibility for what you do to your own car. Good luck and send over some pictures of the final outcome when you have it all fitted via our Facebook page!
@jarod645 8 жыл бұрын
+Turbo Autos Thanks for the prompt reply. I'll make sure to send you the before/during/after pictures once I replace the unit and try again. I'll definitely be more careful this time!
@lexr45 5 жыл бұрын
Hahahah you absolute fuck head, dont say they did it when you didnt do your research
@user-vu3dl9re7s 11 ай бұрын
would a E43 angel light work as well for the Mazda 3?
@user-vu3dl9re7s 11 ай бұрын
would a E43 light work as well for the Mazda 3?
Tenza Motorsports
Рет қаралды 19 М.
PERSONALIZADO DE FAROS | APERTURA DE LUPAS MAS LUZ| MAZDA 3 RGB LED ANGEL EYES|OJOS DE ANGEL MAZDA 3
Rulas Racing
Рет қаралды 58 М.