DIY Apartment Balcony Bar

No video

DIY Apartment Balcony Bar | Weekend Build

Рет қаралды 13,199

Күн бұрын

Materials:
- Cedar Decking Board 5/4 in. x 6 in. x 10 ft : www.homedepot....
- Cedar Decking Board 5/4 in. x 6 in. x 12 ft : www.homedepot....
- Exterior Pocket Screws : www.homedepot....
- Exterior Finish/ Stain : www.homedepot....
- Waterproof Glue ( Titebond 3 Ultimate Wood Glue ) :
www.homedepot....
-Brush to apply finish
Dimensions:
- 4 ft long ( all boards)
- Table Top 1 foot deep
- Back Rail Support 4 inches wide ( extra from the piece that was ripped to make the top 1 ft deep)
- Bottom Rail Supports 12 inches long (extra from the 10ft board, makes both supports)
}} Instagram {{
/ mw_martensw. .
*DISCLAIMERS
Some of the above links are affiliate links. This costs you absolutely nothing, but pays me a small commission and helps me continue to create this free content for you to enjoy.

Пікірлер: 7

@benchase192 9 ай бұрын

Definitly gonna build me one for my apartment balcony!!

@antonylekoko212 2 жыл бұрын

Okay this is cool! 🔥

@gbaird2009 2 жыл бұрын

Looking at the pictures you had on IG it looked like the bottom supports were just 2x4 and I was thinking that wouldn't hold a whole lot, but that looks a lot more sturdy than I thought! Does the top feel like you could put a fair amount of weight on it without buckling?

@ZRL11 2 жыл бұрын

Pocket screws and glue will be more then enough for its purpose. Dont go putting your full weight on it...

@martenswoodworkingDIY 2 жыл бұрын

I would not use it as a chair. It should support the weight of some food and elbows leaning on it no problem. The bottom piece is touching the rails on the balcony to add the support for the weight on the table.