DIY Apple AirTag | Results will blow your mind 🤯

Рет қаралды 37,665

Күн бұрын

We attempted to make our own Apple AirTag by using the same Ultra Wide-Band technology. So watch out the video to know about how we did this and how close we were to Apple AirTag
To try out free trial version of Altium, click here - www.altium.com/yt/techiesms
You can support me🙏🏻 and also get benefitted on Patreon :- / techiesms
Subscribe now💪🏻 to watch some amazing videos coming up soon.
bit.ly/techiesms_youtube
__________________________________________________________
👨🏻‍💻 Important Links 👨🏻‍💻
Getting Started with ESP32 UWB board - • Getting Started with E...
__________________________________________________________
Now you can get free PCB with every order of techiesms T-shirt or techiesms pocket notebook.
You can buy the merchandise from here,
techiesms.com/merchandise/
__________________________________________________________
👀 You may Like these videos 👀
Forgot to add links😅
__________________________________________________________
Buy the components for your projects and support techiesms💡🔌
ESP32 Dev board - amzn.to/3jiwCD6
ESP32 Module - amzn.to/3g5CKh5
NodeMCU - amzn.to/2wbzNrZ
Raspberry Pi 4b - amzn.to/3phsKFN
Raspberry Pi pico - amzn.to/2RgeSyW
Arduino MEGA - amzn.to/3vMEkLw
TTGO TCALL module - amzn.to/2SQG6wH
Visit my Amazon Storefront for purchasing any components you need for this project or any other project :-
bit.ly/techiesms-Amazon-Store
__________________________________________________________
⏱ Time Stamps ⏱
00:00 Introduction
01:42 Hardware Part
02:27 Explaining about How we will be making this project
05:43 Explaining Code for this project
09:45 Testing Project (first attempt)
10:02 Added Some Modification in the code
10:21 Testing Project (second attempt)
11:03 Testing our own made AirTag in our Studio
12:58 Let's Discuss why we can't completely replicate Apple AirTag
14:33 Like this video, if you like this project!!!
__________________________________________________________
🎥 🎙 My Video Gear 🎙🎥
Camera - Canon 750d
Lens - 50mm f/1.8 STM Lens (amzn.to/32gqnsi), 24mm f/2.6
Key Light - Godox SL60W (amzn.to/3522mHe)
Fill Light/Back Light - Osaka Lightning Setup (amzn.to/2I5cdDi)
Tripod - amzn.to/3uNhC4H
Microphone - Samson Meteor (amzn.to/32jfVAt)
Microphone - Zoom H1n Handy Recorder (amzn.to/3KiSlIa)
Editing - Final Cut Pro X on MacBook Pro ( amzn.to/3vHcSyJ )
__________________________________________________________
Get connected with techiesms everywhere..
Subscribe Main Channel :- bit.ly/techiesms_youtube
Subscribe Shorts Channel :- bit.ly/techiesms_shorts
Facebook :- / techiesms
Twitter :- / imtechiesms
Instagram :- / techiesms
Website :- www.techiesms.com
Telegram - @techiesms
You can support me and also get benefitted on Patreon :- / techiesms
__________________________________________________________
techiesms
explore | learn | share

Пікірлер: 49

@techiesms 2 жыл бұрын

Should we try to shrink it’s size and make it more portable? . Keep Sharing, Keep Supporting 😇

@simplemanushya479 2 жыл бұрын

Yes yes definitely

@theentrepreneur8715 Жыл бұрын

Can I have your email please. I have a proposal

@cristobalpalaciozuluaga3250 Жыл бұрын

Julian my teacher made me do this proyectr and thanks to you i can completed. Hellow from venesuela. Keep up the good work and thanks for making me pass this class.

@21672747 9 ай бұрын

I found this quite helpful, but I am wondering how we can also include the direction like airtag does. Or does airtag simply use multiple iphones and pin the location based on the overlap of circles with radius of measured distance?

@error346 Жыл бұрын

Can you also get the orientation? Like a vector

@enochedoh1145 Жыл бұрын

Hello good video!! Where can I get all the materials needed for the creation?

@sushantkhaire4556 2 жыл бұрын

Please make a video on controlling BLDC ceiling fan using esp8266. btw.. love your work. 👍

@user-sr1wm6yn3s 4 ай бұрын

Hi Sir, Is that possible to send custom text/string using UWB?

@tsumokd7616 Жыл бұрын

Hello. I am trying to communicate two ultra wideband bu01 dw1000 chip using esp32 d1 mini without any breakout board. What i did was to etch a pcb board and only solder the necessary pins to communicate 2 uwb with each other. The pins soldered was the SPI pins (CLK, MOSI, MISO), CS pin ,IRQ pin, RSTn, VSS, and VDD3v3. I checked the soldered pins with multimeter and there is no shorts in wiring connections or whatever. But it just doesn't work. Any ideas why?

@soovui 2 жыл бұрын

This is superb bro, if we can put it on a map that's superb fantastic.

@renzojavier585 Ай бұрын

Does this work as the same to an arduino board?

@LeicaM11 Жыл бұрын

Do you intake Lithium against your depressions or is it your chum? Wishing the best.

@ariebongers5606 2 жыл бұрын

Super video. Can you use this receiver in combination with an real airbag?

@gachecem_yt 4 ай бұрын

What is the program /compiler that you are using to program in c, because I have C and I am currently using VS + mingw to run it

@voidzero3227 3 ай бұрын

arduino

@kaushalsuvarna1284 2 жыл бұрын

Sahiii 🔥🔥🔥👍

@Jeevan24 2 жыл бұрын

Awesome

@CHUKISTEIN 2 жыл бұрын

Great video, It would be incredible to adapt the uwb to a home automation system that would personalize users and not only detect the presence of something or someone as happens with presence sensors.

@techiesms 2 жыл бұрын

Amazing idea !!! Will definitely try to work on it

@kocreative 2 жыл бұрын

Very interesting.

@bheeshmavasuprasad 2 жыл бұрын

Finally!!!

@prratek9132 Жыл бұрын

Wow!

@ersheikismail8293 2 жыл бұрын

👍 Great

@gachecem_yt 4 ай бұрын

Instead of using the apple ecosystem, could be maybe using a GPS receiver, and an antenna and some how would be able to track it from outside the room

@EasyOne 2 жыл бұрын

nice

@pushprajpatil87 11 ай бұрын

I want a copy of code

@krishnaghatol1391 2 жыл бұрын

Maybe you can also add a GPS and GSM module with deepsleep capabilities to ping its location every minute or 10.

@techiesms 2 жыл бұрын

But for that I also need to add a SIM card and need to recharge data plan in it which will be way way different then the actual airtag

@theentrepreneur8715 Жыл бұрын

Are you able to build one?

@dibyojyotibhattacherjee897 2 жыл бұрын

Hey man, no offense just use visual micro or platformio once, coding will be a helll lot easier...

@vikassingh703 Жыл бұрын

Sir please make a project on Attiny 85 and IR LED and a button with can transmit AC temperature signal in 20 minutes time interval

@vikassingh703 Жыл бұрын

Sir I want to describe it in detail. Why is this project needed? many times our children and guest set AC Temprechure at 18 and we can't force them to select 24 or 25. then this project will help to restore our desired temperature. The device will only use 4-5 components 1. Attiny85, 2. IR Led, 3. Mirco push button 4. Led (to check device status) and coin battery (CR2032) and all components will fit in 15mm*15mm. and what the device will do, we will put this device in that room, it will send IR Remote Signal to AC in 20 minutes or 30 minutes time interval and AC Temprechure will set 24 again if child reduces AC temprechure device will reset again and in last which capabilities must have by device 1. Learning function( when the user will press the button for 5-second the device will enter learning Mode (Led will flash) then the user will press the AC remote button in front of the device and the device will receive that signal and save it after pressing 1 click in the device. then it will send the same signal after the time interval (Sir this will be a great Project it will help millions of people and will help you millions of Views

@mohitbhangale8229 Жыл бұрын

Where is the code of given project

@terjeoseberg990 5 ай бұрын

10 months and they can’t tell you where the code is. I suppose that means it’s not worth subscribing, eh?

@techiesms 5 ай бұрын

github.com/techiesms/DIY-Apple-Airtag-using-ESP32-UWB

@terjeoseberg990 5 ай бұрын

@@techiesms, Finally after 10 months!!! Thanks though….

@mohitbhangale8229 5 ай бұрын

@@techiesms Not working GitHub repo

@BKRD Жыл бұрын

By searching some solutions for my problem, i just found this Video. May someone could give me a feedback - maybe techiesms - if it could work :) My idea is, for an live sportbroadcasting event, to track multiple Samsung Galaxy SmartTag+ (the new one with UWB) on an 2D map. Technically build some anchors with Esp32 and use the SmartTag+ as anchors. Would that be technically possible? :)