great video i ordered this kit to do my mothers shower which is half the size and I'm glad to see that the finished product looks great !

Just ordered this kit for my shower. Thank you so much for such a thorough, honest review! You’ve definitely made me feel a bit more confident abott it my project. 😅

Omg thank you for such a detailed review. My husband and I are doing this tomorrow and I am not looking forward to it. I got the “fluff” kit but no razor. I’ll have to grab one beforehand. I hope it holds up for you guys. God bless you!

Great video, quality content. Thanks for sharing. Not many true video reviews of this product

Very informative! Thank you! :)

Great video, thanks. I'm about to take on a small shower stall by myself, so your video was very helpful and informative. One suggestion, trying to get "crisp lines" is almost impossible, so what I've done in the past is use caulking to "smooth out" the line, appearance-wise. My grandpa taught me that caulking helps "hide a multitude of sins."

I will be getting to the painting step this weekend but I found that hitting the caulked areas with WD-40 breaks down the caulk and makes for easier sliding with the razor blade. Also, believe it or not, I used one of those triangular head power sanders with the hook and loop pads that allowed to get into corners, didn't require any pressure and you could cover the shower very quickly on that sanding step.

Thank you. I purchased direct from the company to include their mask. Like you, I have all the other tools. My concerns have been not having a bathroom window in the guest bathroom for the tub/shower surround. I think I may need to lodge up in a hotel for a couple days with my dog after I finish. Appreciate your feedback and thoughts on the product! Love it! So helpful!

You two are so cute! Thanks for the video, it makes me so happy that people take the time to film and review things. I just finished my tub using the bathworks 24 hr dry time kit and it looks amazing. A few small runs/drips but otherwise I am really pleased. It looks a million times better than the dirty chipping tub. The kit says 24 hr dry time. It has been about 32 hours. While it is dry to the touch it's still tacky.... I am not about to shower in it lol. Do you recall how long you felt like it took to actually really really harden up?? Because I will tell you it is definitely NOT 24 hours. And I am in Utah which is 94 degrees and dry out.

Thank You

I just finished this project. I have no major drips or runs, but it did not dry as smooth as I hoped. The instructions encourage you to keep the roller wet and not "dry roll" but when I went back for the second coat that whole step was essentially a dry roll. The cost and the effort is worth it for an average home, but for a higher end renovation I can see why someone would hire a professional that would spray the material.

Awesome

Awesome video! Thanks for the pointers! Will this product be something I can use on a cast iron tub, or porcelain sink or toilet? Looking forward to seeing what all projects you get into during your remodel!

This is the way to do it right. A contractor would never take the time to do all those steps. Thanks so much. I wish I could get my wife to help me. She just sits and watches those dopey home remodel shows. They are so magical aren't they? What a bunch of crap.

I have used this product. Bathworks works great but you need to be careful with the prep. The prep and tools are key. I did a different technique on my tub and shower walls by putting the product in small cups and poured it down my tile walls from the top and then spread it with a foam roller intended for oil based paints. It turned out great and I didn't get any roller marks.

“But it looks nice” 😂😂

I did this to my shower about 1 month ago. I have a lot of drip marks because the instructions said not to dry roll. Can these be sanded and painted over? I have an extra kit. Suggestions appreciated

How long did you wait between coats? Was it still tacky when you did the second coat? Great video! Thanks

Well detailed review 👍 I know its only been a month, but how is it holding up? I need to refinish my cast iron kitchen sink. Do you think this stuff is tough enough? 🤔

Hi! Thank you for the detailed excellent video. I'm looking at doing our shower with this product. Looks like it's been almost a year ago for you. How is it holding up?

Hey! Good job! You should post more. You said you are remodeling your whole house, right?

I'm painting shower floor tiles that are small so lots of grout lines. Do you think a regular roller cover (non-foam) with a thicker nap would work?

We call those bugs "no-see-ems" up in Maine

What do you use to clean it? Wondering how it is holding up.

BTW, the ventilation has me concerned. The bathroom is small but there is a window that goes right outside. You suggest a fan against that window to draw the fumes out or at the door way blowing the air out and closing the bathroom door? Also, this takes two coats, so I'm thinking you do the walls, go back on the walls a second time then overlap to the floor/tub area twice unless it is possible to use a roller reach type pole.

How has this product held up? Any chipping or scratching so far?

How has this held up? Thanks!

One kit is enough for the whole shower ?

It looked beautiful before 😮

Do you think it’ll hold up to a sink?

metal tubs can be repaired with bondo. If it ain't smooth before you paint, it wont be after you paint.

I don't understand filling in the shower door holes... what if you want to keep the shower door? Can you not keep the shower door and have to go with a curtain? or can you just screw back into the same filled-in holes?

How is it holding up after a year?

Can you not spray it?

We cause those bugs No-see-ums where I'm from. They are worse than mosquitos.

We used this system and I do NOT recommend it. There is no such thing as a short cut. The kit says nothing about a warranty but it does say that any standing water on a sill must be removed and that you can not use a bathmat without a suction cup and basically you can't put anything on the edge of the tub. If I would've know that I would've walked away. We bought 2 kits, one for the shower walls and one for the tub. The little woman used up 2 entire kits just on the tile walls. You'd think the manufacture would assist in the cost to get the tub done but they gave us the finger. And you'd think since the product was twice as thick on the walls that it would be more durable....NOT. This product has been on my shower walls for 2 weeks and I can already see tile underneath. This is a crap product but let's see what the warranty covers and how well the manufacture cooperates....maybe I'll get some satisfaction after all...oh and yes, I am going to replace all the tile...