DIY Bench Grinder to Belt Grinder Conversion

No video

DIY Bench Grinder to Belt Grinder Conversion | No Weld 2X36 3/4HP

Рет қаралды 644,455

DTMINE

Күн бұрын

Пікірлер: 115

@laurikennedy3147 Жыл бұрын

First one showed missing parts. Second one was complete. It's a working bench grinder kzfaq.infoUgkxxC8HPnl24fu0XhMU_nbmWNEUoK1RMHXk . One thing I like alot is that it's surprisingly quiet. I don't feel like I'm sacrificing any rpms or power for the quietness either. All in all it's a very nice machine. No vibration whatsoever.

@smoky5833 2 жыл бұрын

I like that it is built out to from the motor, so when using, your part( being sanded) is clear fro any obstructions caused by the unit (grinder motor) itself.

@roncrandall 3 жыл бұрын

I totally never thought of using my bench grinder as a lathe. I'm on it!

@blargkliggle1121 3 жыл бұрын

@Alan Whiteside no he meant how he rounded the piece by using the grinder as a makeshift lathe

@lesstime1678 2 жыл бұрын

nice job man ,,,, no stupid welding in this job ,,,, that's the way to go ,,,,, when i see weld i just skip the video,,,,, you are the man ,,thank's for the nice video

@danpat72 3 жыл бұрын

BRAVO LAD BRAVO!!! Gotta admit at first i was like wtf is he doing that will never work then BAM it all came together and i was amazed with the ingenuity and craftsmanship.

@martyalcorn8990 5 күн бұрын

just what i been lookin for thanks mate........no welding yea!

@lohikarhu734 3 жыл бұрын

would be nice to have some kind of a sketch(metric, of course!) to help plan this out for oneself...neatly done!

@blueberrymuffenman 3 жыл бұрын

I bought a shity belt grinder made from a bench grinder used it once because of how shit it is... This has given me some ideas of how to fix it thanx

@dtmine9133 3 жыл бұрын

Hope it works out well for you. I've used mine a bit without much hiccups, just a couple of mods. I'm currently making my 2nd knife with and its still holding up. Biggest concern is metal dust so I will open it up for a clean and check after this project is done.

@jeffh156 3 жыл бұрын

Good job! I would add one thing. Some type of guard or shield over the grinding wheel. I wouldn't want to be grinding on something and swing my knuckles into that moving wheel.

@stephenfaulkner1448 2 жыл бұрын

Sweet. Saved this video to complete myself one. Tks.

@lenerthois13180 Жыл бұрын

Très beau travail qu’elle dimension la bande abrasive Cordialement

@LeanSheep 4 жыл бұрын

Nicely done, that drill handled it like a champ!

@kittensausage5901 3 жыл бұрын

This is actually a really good idea and I’m totally going to steal it.

@karlalton3170 3 жыл бұрын

Thats the Dogs Nut's mate awesome build 😁😁🤘🤘🤘🤘

@neffk 3 жыл бұрын

I think a little crown on the wood pulley might help keep the belt centered. All the old flat-belt equipment had a little curve to the pulleys.

@dtmine9133 3 жыл бұрын

I did actually try that on another wheel but still wouldn't quite track properly. I ended up finding the issue: the aluminium T bar (with the tracking wheel and spring) would slightly flex when loaded or adjusted. I have since replaced it with square 25x25mm steel tube and it tracks perfectly.

@giggidygiggidy4884 3 жыл бұрын

Not true, I have a professionally made belt grinder and none of the wheels are crowned. It tracks perfectly.

@MaturePatriot 3 жыл бұрын

Good work. I was wondering what to do with my extra bench grinder.

@sentinobis4261 7 ай бұрын

cool, i search for a things like that but the industrial one whit just 2 wheels look really cheap compare to that and have just 1/2hp 2.5 amp. cost 240$ but you can do nothing whit low power like that.. Not really hard to make just a bit of patience and somes srcew, find a sheap of steel.. thx really good idea!

@bayzidmunshibayzidmohammed3754 Жыл бұрын

Excellent job ❤

@samanthaeberhardt4894 Жыл бұрын

Are you using steel plates or aluminum I'm trying to build this n what thickness are you using please. You have made a cool machine

@roge4018 4 жыл бұрын

Now that one is doable, no metal lathe required 🇺🇸🤙🏼

@AnthonyQuattroneSC 3 жыл бұрын

Great build. Post more builds!

@SerratusNL 3 жыл бұрын

Thnx a lot!!! I Really like how you made this, just ordinary tools, no fancy shit. I'm gonna steel it too!

@romanrojasramon4951 3 жыл бұрын

Está genial el video me ayudó para darme una idea de cómo reciclar un motor viejo que tengo por casa

@larrysullivan6536 3 жыл бұрын

Fantastic what a good job well done buddy I’ve got to make one of these cheers Larrysullivan in London

@dunna321 3 жыл бұрын

awesome design and no welding. i might actually make something like this for myself instead of buying one. very nice and thanks

@dtmine9133 3 жыл бұрын

Cheers. Hope it goes well for you.

@MadeInGarage 3 жыл бұрын

Good work bro!

@santarsbuilders7905 2 жыл бұрын

Good work👍🤝🙂

@aros007z 8 күн бұрын

Awesomeness

@user-ti1qs5hu6i 7 ай бұрын

Молоток! 👍👍👍

@klave8511 3 жыл бұрын

Now, how to get the metal cuttings out of your fingers ... Loved that ball holder you made to drill the ball.

@lawrenceogden8682 3 жыл бұрын

great way to crown your wheel i use quater wide 3m tape great video

@dtmine9133 3 жыл бұрын

Thank you! The tape has worked really well. I didn't expect it to last but it hasn't really worn at all.

@lawrenceogden8682 3 жыл бұрын

@@dtmine9133 wont wear out good for several years

@deanscoggins4791 3 жыл бұрын

Good idea. You might want to turn wheel bolts around. So bearings can ride on smooth part of bolt. If too big spin in drill sand down

@dtmine9133 3 жыл бұрын

Thanks ill check it out when I can get to it.

@craigbuchan316 3 жыл бұрын

Nice work. Now can you please build a pedestal drill. You seriously need one

@dtmine9133 3 жыл бұрын

Yip...bought one straight after finishing this. That drill took a beating.

@hwfranjr 3 жыл бұрын

What size was the wood made and what size skate board wheels, looks like your firing for 2 in wide,what size of sander strip?

@DavidsProfession 3 жыл бұрын

nice video man

@stevenmackay9192 Жыл бұрын

Have you got a plan and a list of material used with dimensions please?

@jasonwick3257 3 жыл бұрын

Perfect affordable concept.

@AdamWrightthegeek 3 жыл бұрын

Great work! Do more diy videos!

@tructieptinvui1248 3 жыл бұрын

You guys do great, let's create together, see you next time

@sniper31013 2 жыл бұрын

Good job mash'Allah

@jameslovering9158 2 жыл бұрын

Hi what were the cost of the wheels and are they holding out ok ?

@valeryn4704 3 жыл бұрын

Великолепная идея! Мощность двигателя 550вт, а какие обороты - 1500 или 3000 точильного станка? Great idea! The engine power is 550W, and what is the speed - 1500 or 3000 of the grinding machine?

@dtmine9133 3 жыл бұрын

2850rpm. More info here www.bunnings.co.nz/aeg-550w-200mm-bench-grinder_p6230133

@valeryn4704 3 жыл бұрын

@@dtmine9133 Спасибо!

@victorgonzalez1564 3 жыл бұрын

Da la impresión que la rueda tractora hace trepidar el conjunto, quizá no esté bien torneada.

@Dominic.Minischetti 4 жыл бұрын

That came out awesome! Nice job!

@robertgilmour1903 3 жыл бұрын

Enjoyed watching this and a good end result.

@dalethorson3653 2 жыл бұрын

Thanks for a practical way to build a good tool at moderate expense. So what if a machinist can build one with with 15K worth of machine tools. Thanks again. I would like to see pictures. bolt sizes, etc. You could make a paper plan and email it to those interested.l would be happy to pay something for that. (reasonable of course).

@Ypufgb 2 жыл бұрын

Outstanding build mate! I just wanna know what is that equipment you used in making same thread for screws. Thanks and looking forward for your answer.

@berniesr 3 жыл бұрын

Great Job well done

@stovecreative1472 3 жыл бұрын

Good idea it so cool 👍👍👍

@frankcostanzo8391 3 жыл бұрын

Why didn't you use a longboard wheel for the drive wheel too, just like the idler and tracking wheels?

@dtmine9133 3 жыл бұрын

Firstly the size. Motor isn't variable so I have 3 diff sized wheels for different speeds. Secondly the inside diameter is wrong, and if I were to drill it out there wouldn't be alot left for the nut to bolt up against, and it would be too brittle done that way.

@crossgrainwoodproductsltd9230 3 жыл бұрын

Very nice and just what I need! Do you have any tips when laying the holes out on the piece of steel? I've had a piece of 3/16 steel laying in the shop for a "someday" project and this is the perfect project! Thanks for sharing!!

@dtmine9133 3 жыл бұрын

I just laid out the belt and 3 wheels so that it had a reasonable front flat section and was inline at the bottom wheel to drive wheel, that section doesn't need to be long. Then when doing the top tensioner the wheel needs to be out far enough to align with the front bottom wheel. Hope that makes sense.

@manjitmundey3064 Жыл бұрын

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

@gabrielgalvezm.1653 3 жыл бұрын

Eselente rsmerilador de banco fue formidable

@sigung01 3 жыл бұрын

Brilliant!

@rlm98253 3 жыл бұрын

Well done, sir.

@duschnock8308 3 жыл бұрын

Une pépite d'or 👌

@luissouza5501 Жыл бұрын

Show !!!!!!!!!!

@erroldavis2983 2 жыл бұрын

For a smart guy, did I just see you run a knife edge against the rotation of the belt?? Bad. idea dude!~!!!

@MacStrange 3 жыл бұрын

I will make it, very beautiful

@andreasel-salanti2385 3 жыл бұрын

do you by eny chance have the plans and drawings for this?

@schechter01 3 жыл бұрын

I had the same thought. We need the plans for this!

@dtmine9133 3 жыл бұрын

I dont have plans sorry but ill work on getting some pics and measurements done. I've broken my leg so I'm out of action for a while.

@andreasel-salanti2385 3 жыл бұрын

@@dtmine9133 pics would be nice, and sorry to hear about your leg.

@CerradoGoias 3 жыл бұрын

👍

@peterharold6456 3 жыл бұрын

Are their any plans for this build please

@dtmine9133 3 жыл бұрын

No drawn up plans sorry. It was all planned and measured as i progressed.

@munayata38 4 жыл бұрын

You might want to cover the bench grinder when using the belt grinder.

@dtmine9133 4 жыл бұрын

Thanks for the feedback. Will look into it.

@Frankowillo 3 жыл бұрын

@munayata38 Why?

@munayata38 3 жыл бұрын

@@Frankowillo safety. Hand or part can slip on the other wheel while working

@giggidygiggidy4884 3 жыл бұрын

Anon amous didn’t you see how close his hand got to the grinding wheel when he was rounding off the corner of the wood?

@eliseopolanco2059 3 жыл бұрын

Hi , do you sell it ? if you sell it i buy

@putera7529 3 жыл бұрын

got the blueprint of this?

@dtmine9133 3 жыл бұрын

No I don't sorry, just this video.

@espjason 3 жыл бұрын

Hi do you have drawings I can use please

@dtmine9133 3 жыл бұрын

Hey man, I've broken my leg but when I can get back to my bench ill do some photos and measurements and put them in the description.

@ziegenwilly 2 жыл бұрын

schön , gebaut , aber motorleistung zu schwach drehzahl zu langsam

@rottiejakeluke 3 жыл бұрын

Where did you get the step drill used? Thanks

@dtmine9133 3 жыл бұрын

Bunnings.

@rottiejakeluke 3 жыл бұрын

@@dtmine9133 I’m not familiar with “Bunnings”? Can you please send me a telephone number or better yet a link to make the purchase? Thanks

@user-sc8bp3qj9e 2 ай бұрын

Order

@Deadfeat 3 жыл бұрын

Like everything but the wood drive wheel. Definitely won't hold up.

@dtmine9133 3 жыл бұрын

It seems to be holding up ok for now but I agree long term it lacks a bit. Any suggestions for a cheap alternative?

@Deadfeat 3 жыл бұрын

@@dtmine9133 why not use another skate wheel? You could tack weld the bearings.

@dtmine9133 3 жыл бұрын

They're to small internally and the plastic doesn't look like it would take much drilling/maching. I would have to remove the bearing and make a sleeve/bush. I will look into it though thank you, maybe with a harder single piece wheel it would be easy to do.

@hwfranjr 3 жыл бұрын

@@dtmine9133 get one milled for it ,pick your metal,lol, also you can order sets from AMAZON,NOT TO PRICY EITHER.

@MaksimoV35 Жыл бұрын

маленький станочек, не для такого железа что суешь)

@andreiko205 2 жыл бұрын

Щетка-сметка? Нееее...не знаем...

@65burnie 3 жыл бұрын

Not a good idea to grind aluminium on a grinding wheel. Vary dangerous!!!

@crossgrainwoodproductsltd9230 3 жыл бұрын

May I ask why aluminum is worse than steel. I've always used the bench grinder for big pieces of steel, aluminum, and brass. I do wear google and a face shield. I know overkill with the two but it is the way my father taught me along with a leather apron and gloves. He was a welder, steam-pipe fitter for 40 years. He also taught me how to use the angle grinder, and the welding machine set he gave me. But I'm serious when I ask why. I always say Its never to late to learn something new. Thanks. Cheers.

@65burnie 3 жыл бұрын

I was always taught not to grind aluminum on a wheel grinder. The soft aluminum embeds into the wheel. If you come along and grind steel with that stuck in the grains of the wheel and heat it up the aluminum can expand and fracture the wheel causing it to explode while its on.

@crossgrainwoodproductsltd9230 3 жыл бұрын

@@65burnie YIKES!! I'm definitely going to change what I do on the grinder. Thanks for the info and for replying. ;>)

@klave8511 3 жыл бұрын

CrossGrain Wood Products,LTD : The aluminum clogs the wheel, just like when you file it. The wheel needs to be dressed afterwards to get the surface clean and sharp again. A wheel designed to grind aluminum is different, wears faster as the grains fall out and keep presenting new sharp grains underneath. It doesn’t clog with pieces of the soft aluminum.

@user-hn4dk7ns7i 5 ай бұрын

Ни наждак, ни гриндер.

@sneakyneaky 3 жыл бұрын

Sorry but a total disregard for safety is too stressful to watch, I'll pass

@dtmine9133 3 жыл бұрын

Can you elaborate please, I like the feedback. I know I messed up with the aluminium grinding and the possible health effects of the brakleen. Is there another ?

@robbenevens188 3 жыл бұрын

@@dtmine9133 don't bother with the safety nazi's it is not your problem that they have bad healthcare

@user-sc8bp3qj9e 2 ай бұрын

Order