DIY Bench Vise Stand with Storage

No video

DIY Bench Vise Stand with Storage

Рет қаралды 95,202

Күн бұрын

In this video I make a simple vise stand for my Wilton. All of the plate I use is .250” and the tube is 4x4x.250”. Thank you to those who gave some great feedback through my Instagram stories on how to mitigate the wobbly base.
Subscribe to my channel: tinyurl.com/y7...
/ @tylerbellmakes
FOLLOW ME:
I make daily stories on Instagram
/ tylerbellmakes
/ tylerbellmakes
TOOLS & SUPPLIES (affiliate links):
Leveling Feet amzn.to/2rBEgi7
Welpers amzn.to/2EubYyz
Unibit amzn.to/2QQZwyx
3-IN-ONE Oil amzn.to/2rAGYo0
40 Grit Flap Discs amzn.to/2EuaO6g
12” Speed Square amzn.to/2EukSw0
New Favorite Glue amzn.to/2Msi1E2
MUSIC:
player.epidemi...

Пікірлер: 107

@MSladekPhoto 5 жыл бұрын

This is awesome! Such great storytelling. 6 minutes went REALLY fast.

@PierreRousseau1958 3 жыл бұрын

Excellent work. Your demonstrations are concise, clear and wide open for anyone watching them to add their own subjective improvements.

@ggalindezb 3 жыл бұрын

I'm looking for a vise stand for my dad's 30-year old (now restored) bench vise. I grew up watching that thing take a ton of punishment while crafting a plethora of projects and even learned a lot myself from it. This video is a TON of inspiration for my next fabrication project. Thanks a ton for the creativity push.

@rhubarbpie2027 4 жыл бұрын

That Wilton vise is DANK. Edit: good inspiration here, I'll likely borrow some design elements from your build and create a multi-purpose stand that can be used to mount bench vises, bench grinders, and other tools.

@dariusmitchell9397 3 жыл бұрын

Hi, I enjoyed the video. I’d like to recommend welding in your main square tube to the bottom plate with 1 inch welds on opposite sides allowing to cool in between each set of 2-4 sections of weld until it’s fully welded in, instead of welding a solid line on each end in one go. You’ll find it doesn’t warp the bottom plate as much if at all.

@olly_wooly 3 жыл бұрын

The wilton bullet is like my dream vice man you're so lucky you have one.

@WorksbySolo 5 жыл бұрын

Sweet! I definitely agree with some other comments. The story line is what held my attention. A simple search for a solution. Nice work!

@maxodorestant9053 4 жыл бұрын

Very talented young man, I wish you could build one for me.

@edwardleefilms 5 жыл бұрын

this video is so awesome. that intro sequence was golden hahaha

@karljacobson1575 4 жыл бұрын

Wilton vise!! Good ones if it’s an older one!!! Looks new!!

@AlsHackShack 5 жыл бұрын

Great vid Tyler. Loved watching you problem solve as you go. Genuinely thought when you said accessorise it was gonna be like spinners and neon haha!

@jbuckley2546 4 жыл бұрын

Well done Tinkerbell.

@njrworkshop 5 жыл бұрын

Great project and fantastic video. Excellent editing and story telling. Well done!

@andreirodriguez8802 5 жыл бұрын

this was a big help in my vise stand design. Thanks for all your ideas! I envy your man cave!!!

@dodojack1045 3 жыл бұрын

Fun to watch. You are quite the entertainer. A skillful one at that.

@andystoolbox 3 жыл бұрын

That's what it's all about. You got my vote. Well done, bravo.

@DivineMisterAdVentures 4 жыл бұрын

Nicely done video - not to mention the stand that is awesome!

@stressmasterbk4294 3 жыл бұрын

Just a upgrade suggestion. weld 2 non rotating wheels on the front side so that they touch when you tilt the base so it is easy to move.

@fredbecker607 Жыл бұрын

You can also make the baseplate round and roll it like a 55 gallon drum.

@shopdoc 4 жыл бұрын

I really enjoyed your video on the vise stand. Great job!

@lobodat 4 жыл бұрын

Good work! Greetings from Poland.

@TylerBellMakes 4 жыл бұрын

Thank you!!👋🏻

@robertbutler8004 2 жыл бұрын

I like the idea of having concrete at the base of the stand.

@joannmoore5701 5 жыл бұрын

Thanks Tyler good looking vise stand keep up the good work bill

@AllenOutdoors868 5 жыл бұрын

Showing support for your channel!!👍👍

@chrissample3047 8 ай бұрын

Nice I like when you said stay

@DA22YLM 4 жыл бұрын

Super work. Great initiative 👍

@arkuhl 5 жыл бұрын

Awesome work ,great idea for a vise will probably copy and thanks for your video !!!!!

@MaltandMake 5 жыл бұрын

Great work and an even better video. Loved the story telling. Looking forward to seeing more!

@glennbarthelemy2443 4 жыл бұрын

Nice job bro 👍👍👍⚒

@madworkxtrouble2274 5 жыл бұрын

Hey ho TB. Nice job.very stable. Easier working now with the vice. Like 1 keep the great work comming. Greetings from Germany 🇩🇪

@jasonreynolds4050 4 жыл бұрын

Now I want one!

@RedSmith 5 жыл бұрын

Nice work Tyler. And great editing !!

@whazee 5 жыл бұрын

Dude, this is such a great build, I love it! And I want one! 😄 Very funny too! 😁👍

@jackdawg4579 4 жыл бұрын

Pretty hard to beat a welding table when doing something like that base plate. Tack it to the table, weld on the leg braces etc, let it cool, break the tacks free and perfectly flat base.

@FredMcIntyre 5 жыл бұрын

Nicely done Tyler! 👍🏻👊🏻

@goneballistic 5 жыл бұрын

Bad ass build. Loved that

@charlesberry4958 3 жыл бұрын

Great work Tyler!! Very cool.

@theadamfangue 5 жыл бұрын

Great work, I ended up here after watching Jimmy Diresta’s Instagram story. You definitely earned a subscriber!

@jarredsegal6842 2 жыл бұрын

The good thing about that type of stand is you don’t need the x/y pivot on the vice so can cheep out if you don’t need the z pivot (vertical pivot for the jaws) because the stand is moveable I made one for inside and one for outside because I’ve got a very very old vice I inherited (just oil once or twice a year to avoid rusting)

@vitaliniaznayeu8899 2 жыл бұрын

🇷🇺 пересмотрел много подобных работ, у вас более устойчиво и надежно сделано, спасибо !!!

@garypannone7755 Жыл бұрын

Great video nice shop.

@Will-Parr 4 жыл бұрын

Excellent.

@mghood1954 3 жыл бұрын

Nice Job Tyler. You did a nice job of over building just like I do... Fabulous Vice Stand..I am making one like yours

@TylerBellMakes 3 жыл бұрын

Thanks!

@timsworkshop85 5 жыл бұрын

Great build man!

@juancarcamo3137 Жыл бұрын

Great idea

@bluegoldgr 4 жыл бұрын

Nice job👊

@pablorraco 5 жыл бұрын

Looks good, well done!

@SamGreenMaker 5 жыл бұрын

Crushing it man! keep it up!

@JedidiahShultzIrishCraftsman 3 жыл бұрын

Great job Tyler!!😃 I love the 2.0 also! Keep up the great work man👊🏻 💚

@martystratton5818 3 жыл бұрын

Great job young man

@natalegawaelia7165 4 жыл бұрын

good job, simply & useful!

@fredboat 3 жыл бұрын

Pretty slick, Lookin Good. Later from Texas.

@KyleRF124 Жыл бұрын

You look like young Sheldon

@jeffalvich9434 Жыл бұрын

nice job👍

@theodorebowers9737 2 жыл бұрын

🙋 Hi Nice Job , got some good ideas from this. THANKS ❤ GOD BLESS

@onesavedvoice 3 жыл бұрын

Very nice rig.

@Tiger-dl1yn 4 жыл бұрын

Very good👌🏻

@peterharkness3547 4 жыл бұрын

You could add a couple of castors on the side, so you could tip it over and wheel it about,

@TylerBellMakes 4 жыл бұрын

Good idea. I was going to but it slides pretty easy

@strongman462 5 жыл бұрын

good job! Like!

@jasonreynolds4050 4 жыл бұрын

Add wheels on one edge so you can tilt it over if needed.

@jcochron 3 жыл бұрын

Fantastic

@matthewpuryear8009 7 ай бұрын

You think the harbor freight grinder stand would work well for a much smaller vise?

@nvrndz 9 ай бұрын

Tyler - don't know so have to ask; what's the cube with the handle main purpose? Looks like you're using it for several things - please describe/explain. I'm in the midst of using this vise stand demo to construct mine. Thanks

@zappolo85 5 жыл бұрын

cool staff

@Richie5480 3 жыл бұрын

Great job.

@erontamayo446 3 жыл бұрын

Hi Tyler, can you tell me what type of welding machine you were using for this project? Thanks

@forby_ 5 жыл бұрын

Nice!

@garyc4983 4 жыл бұрын

Next one before you weld the top pour some dry sandblast sand for more weight in the frame of the stand...........

@suzannepratt2401 19 күн бұрын

could make an adjustable height with some slots for pins or bolts or would that just be to noisy and clanky i am quite tall and have bacl trouble....idk what u think anybody tried that?

@Dev_Everything 4 жыл бұрын

Any advice on how not to warp the bottom plate? (obviously dont heat it much) Stitch weld approach maybe? I am about to build one of these

@TylerBellMakes 4 жыл бұрын

I found that it will warp a little no matter what. Either heat the opposite side of the welds later with a torch to un-warp it or add stiffeners like tubes

@Dev_Everything 4 жыл бұрын

@@TylerBellMakes Thanks, one last thing. What was the dimensions of the bottom plate on the floor?

@mikeaze423 3 жыл бұрын

Nuts underneath will ding up the floors lol Gusset under the vise but nice stand overall

@azul8811 4 жыл бұрын

Tyler, which model number is that Wilton bullet vise, and what made you choose that particular one over other vises? BTW, you do nice work.

@TylerBellMakes 4 жыл бұрын

400s. The large aerospace company I work for has hundreds of them so I figured it'd be good enough for me. Thanks!

@azul8811 4 жыл бұрын

Tyler Bell Okay, thank you. I appreciate your prompt reply!

@joannmoore5701 5 жыл бұрын

What did the parts costs you to make the vise stand I have the same h f stand you have not that good need to make a better one good job on the vise stand

@tamerabo3114 3 жыл бұрын

من القلب. برافووو

@user-yr2hd7gf2t 3 жыл бұрын

Отлично снял

@murraymadness4674 4 жыл бұрын

Didn't you just need to add that base to your existing one?

@keithspencersr.6806 3 жыл бұрын

Nice

@dbayboyds409 3 жыл бұрын

What was the double bar part that you added the holder at the base for?

@LopezAlvarito 4 жыл бұрын

Hi. I have the same Vise, but the numbers on the jaw and the stationary Jaw are faded, and the casing nut is broken. Would you help me with the numbers on your Vise to order a replacement for my Vise ? Thank you.

@whiskeyjim4126 3 жыл бұрын

You need a forge friend

@MadRhetorik. 4 жыл бұрын

I still can't decide if I want to buy a new 400s or a 600s. Have you ever wished you could get a 6 inch over the 4 inch? I think new prices are currently around $709 for the 4 inch and $1499 for the 6 inch.

@TylerBellMakes 4 жыл бұрын

Bigger is better but the 4 in has been good for me

@marcosramirez5865 3 жыл бұрын

Muy bueno!!

@BEDsmieszek 4 жыл бұрын

What is the height od this stand? I have big York Vise and building stand rights nie,, but I dont know that is should be as height ass workbench or lower?