DIY Bezel free kit

No video

DIY Bezel free kit

Рет қаралды 7,242

Күн бұрын

Had some old monitors kicking around so decided to use one of them
to create some strips to remove the bezels on my simulator rig.
I used very small bungies from a DIY store to hold the strips on the
back of the monitors.
Hope you enjoy the video,
PJskilllz
00:00 First look at monitor
02:42 Covers off
04:38 Fresnel layer
05:33 3d Printing
07:33 Marking drill holes
10:19 Clipping together
10:49 Final Result

Пікірлер: 37

@advanceddarkness3 8 ай бұрын

Definitely cool DIY and just as good as the Asus kit, but I still find them more distracting than bezels.

@pjretroredux 8 ай бұрын

Many thanks for watching :)

@tomsawyer2112 4 ай бұрын

I agree, the are just too wide, so I made my own with reflecting mirror tape, fixed on a this piece of wood at the right angles. It takes 10 minutes to DIY for 10€$ kzfaq.info/get/bejne/Zs6BqLyrrcmalo0.html on the right side you can see it is thinner than the right side, as the 2 TV's have thinner borders.

@garyl6031 Ай бұрын

@9:10 you could have used a paper punch or a leather hole punch, makes nice clean hole. Interesting but, next time please use your voice instead of text. If I wanted captioning I would turn it on.

@Retro_Driver Жыл бұрын

Great DIY stuff, keep it up!

@pjretroredux Жыл бұрын

Many thanks for watching :)

@Lito_Sanchez 11 ай бұрын

Good, first of all thank you for your work and the mod for the community ^^, the question is what kind of panel tv is it? LCD TV or LED TV? In my case, I will have to look for a second-hand TV and I would like to be correct so as not to waste money, I would appreciate it ^^

@pjretroredux 11 ай бұрын

Many thanks for watching, The monitor I used was an old Dell LCD monitor. Not sure if LED screens would have the layer but I would assume so as it is used to push light towards the viewer.

@Lito_Sanchez 11 ай бұрын

Thanks ^^@@pjretroredux

@brokenanklesfpv8552 4 ай бұрын

looks like a hole punch would of been so much easier an faster

@pjretroredux 4 ай бұрын

yep definitely, But I couldn't find any in the house lol. Thx for watching

@brokenanklesfpv8552 4 ай бұрын

@@pjretroredux no problem thank for the easy advice on gettin the material for the bezel kit

@enzeefpv9323 7 ай бұрын

Looking for find a donor tv to do this. What kind of tv should I be looking for?

@pjretroredux 7 ай бұрын

Hi thanks for watching, Most LCD screens have a Fresnel layer in them but it can be a bit hit and miss as some TVs have a film layer to bounce the light forward. Best bet is to get a broken monitor. I used an old Dell LCD monitor in the video :)

@enzeefpv9323 7 ай бұрын

@@pjretroredux only problem is I need to find a large monitor considering I have 50” screens for my sim lol. Tough to find an old monitor large enough.

@pjretroredux 7 ай бұрын

@@enzeefpv9323 hehe yeah thats some size, Old TV will be the best bet

@mariolestingi6078 Жыл бұрын

Nice one ! any chance to get the 3d print project ?

@pjretroredux Жыл бұрын

Sorry I deleted the .obj file. All I made was a 6 cm width plate and the depth was my monitor depth. Then 4 legs down by 2cm. Cheers for watching

@frp_freddy 2 ай бұрын

@@pjretroredux wish you posted the file for printing. Thanks for the info

@danieljoyce4844 Жыл бұрын

so instead of a small bazel gap of half inch now you have like three inches of blurry screen? how is this better?

@pjretroredux Жыл бұрын

It isn`t a perfect work around but when racing and any fast motion it is better to have a slight blur than a dark black vertical line. Cheers for watching

@danieljoyce4844 Жыл бұрын

@@pjretroredux I'd just buy screens that have no bezel problem solved but is cool the diy route over buying the kit

@petergab3933 10 ай бұрын

@@danieljoyce4844 everyone would if there were any🤣

@Nonamesplease 8 ай бұрын

@@danieljoyce4844find me a screen with zero bezel that isn't gimmick junk. Lol

@Nonamesplease 8 ай бұрын

@danieljoyce4844 I have a triple set up bezel-free acer monitors with zero bezel and there is still back screen bezels lol these aren't the best but when sim racing there is no comparison.

@clemonscg 9 ай бұрын

Do you know anyone who has done this for a 2x2 video wall?

@pjretroredux 9 ай бұрын

No but I'm not sure if the Fresnel layer will work correctly at a horizontal. If you give it a go let me know the results :)

@clemonscg 9 ай бұрын

@@pjretroredux okay. Thanks for reply

@DjCamme98 10 ай бұрын

I've done the same thing but the layer don't work, why?

@pjretroredux 10 ай бұрын

is it the right way around? also did you cut the strips vertically? cheers for watching

@DjCamme98 10 ай бұрын

@@pjretroredux yes i do but it doesn't reflex the image, i try with all angle, vertically, orizontally , turn it back and so on, maybe my old tv had a different tecnology?

@DjCamme98 10 ай бұрын

it was a sony bravia tv

@pjretroredux 10 ай бұрын

@@DjCamme98 that is possible can you give me the make and model and ill check? did you manage to get a fresnal layer from it?

@DjCamme98 10 ай бұрын

@@pjretroredux i try to fid it tomorrow thank you! I simply opened the tv and use the layes that was behind screen, i try with all combination of the 3 layers that was there

@cocosloan3748 Жыл бұрын

Hey - I see you are using CSL DD now. Just be careful - the big wheel you are using will decrease FFB strength of the wheelbase - so If you want stronger FFB - use smaller wheel 👍

@pjretroredux Жыл бұрын

I Rally and Drift in real life and the deep dish wheel suits me perfectly. Also the 7.5ah PSU ive fitted I have actually had to turn down the force feed back as it aches my arms

@freedomdst Жыл бұрын

it has the correct quick release, why would it decrease FFB?, a bigger size wheel will have less force in comparison but CSL DD with the higher NM is enough.