Hii mam...can I know where did you brought that mould from ???
@sharonrys88953 жыл бұрын
How long do you wait before you can take it out of the mold
@princegamer-17134 жыл бұрын
Very beautiful
@ShubhiArtsCraftsByNeha4 жыл бұрын
Thanks for watching my video 🤗🤗😍 Stay tuned for more videos and please subscribe 🙏🏻🙏🏻🙌🏻🤗😘
@princegamer-17134 жыл бұрын
@@ShubhiArtsCraftsByNeha yes friend I already subscribe your channel
@abitharamkumar3144 жыл бұрын
Vry nice
@ShubhiArtsCraftsByNeha4 жыл бұрын
Thanks so much Abitha.. 🤗😍🤗🤗❤️🙏🏻 Stay tuned for more videos 🙌🏻🙌🏻🤗🤗
@Barbie_All_The_Way2 жыл бұрын
How much is one part?
@Tigerlily19502 жыл бұрын
You don’t show how you fix the edge
@jyotsanawahal70283 жыл бұрын
What kind of glitter you using? My glitter sets down.. and how do you cure air bubbles?
@katerinaaqu3 жыл бұрын
In this video is kinda set down too if you notice. I think the beat solution is to make half the mixture, leave it cure a bit and then add a second layer later so to have more layers of dust I suppose (I have the same issue with you by the way) For bubbles I heard you usually stirr way too gently to avoid the bubbles in the first place but I have seen people using some heat source for erasing the bubbles like hair dryer or some flame they pass over the surface. I have tried the hair dryer. Kinda works.
@beckywilliams99534 жыл бұрын
Is the bracelet rounded on both sides or is it flat on on side?
@ShubhiArtsCraftsByNeha4 жыл бұрын
Thanks for watching.. 🙌🤗👍 It depends how much you fill. First time it was flat on one side and then I tried again filling it as much as possible. try the mold which is proper. I hope this helps..🤗 Stay tuned for more videos and please subscribe.🥰😍🙌🙌🤗
@ShubhiArtsCraftsByNeha4 жыл бұрын
Thanks for watching and showing your interest. 🙏🏻🙏🏻🥰🥰 You are right. You will have to sand it through to make smooth. 😅😅🤗🤗😘 I understand it is some work but end result is beautiful 🤗🤗😍😍😍🥰 Stay tuned for more videos and please subscribe 🤗🤗😘🙌🏻🙌🏻
@abitharamkumar3144 жыл бұрын
Were to buy resin.....send if any online link.....
You may want to trythis: www.amazon.in/East-Coast-Resin-Tabletop-Multicolour/dp/B00V2GXD5A/ref=pd_sbs_328_32?_encoding=UTF8&pd_rd_i=B00V2GXD5A&pd_rd_r=e21c0a49-b4ae-46e0-8a5d-bfa836b33ff9&pd_rd_w=DFFaS&pd_rd_wg=oyClt&pf_rd_p=b5c4df7b-dc8c-47a6-947a-01271326b67b&pf_rd_r=Z1SXXEPZEARDERC12ZHQ&psc=1&refRID=Z1SXXEPZEARDERC12ZHQ
@ShubhiArtsCraftsByNeha4 жыл бұрын
Thanks for your reply. This is the link for amazon.com in US and Abitha needs link which works in India.
@BMResinArt4 жыл бұрын
How much price?
@ShubhiArtsCraftsByNeha4 жыл бұрын
Thanks for watching.. 🙌😊 Are you asking the price of the kit I used or the final price of the finished bracelet 🙌😊🥰🥰 The kit costed me $18 and I bought it from amazon. The resin bottles comes in different sizes so that depends on what size you order.🤗🤗 I hope I could answer your question. Stay tuned for more and don't forget to subscribe.🥰😊 💖💞🥰🥰
@BMResinArt4 жыл бұрын
@@ShubhiArtsCraftsByNeha actually I'm Epoxy 3d floor installer..I know this work but Indian people don't understand..
@farhabano41204 жыл бұрын
How it feels when we touch itm.os it rubber type or glass or which type?
@ShubhiArtsCraftsByNeha4 жыл бұрын
Thanks for your interest. 😍🤗🤗 Once it dries completely (24-36 hrs) then it becomes solid like plastic and shines like glass. 👌🏻👌🏻👍🏻👍🏻 Stay tuned for more videos and please subscribe 🥰🙏🏻🙏🏻🙌🏻🙌🏻👍🏻👍🏻
@jirose4434 жыл бұрын
what is the measurements?
@ShubhiArtsCraftsByNeha4 жыл бұрын
Thanks for watching. 💖🤗🙌🥰😍 The resin and Hardner are always mixed in 1-1 proportion. 🙌👍👍😊✌ Stay tuned for more videos and please share and subscribe. 💖🤗🙌🥰😍
@jasirjabbar80383 жыл бұрын
How many ml we need to take for making 1 bangle
@katerinaaqu3 жыл бұрын
@@jasirjabbar8038 I think it depends on the size. Some molds have recommended amount of resin to the instructions. Sometimes you kinda learn to do it by experience too and know pretty much how much you need.