DIY Bulk Pig Feeder | Less than $100!

No video

DIY Bulk Pig Feeder | Less than $100! | Detailed Build

Рет қаралды 64,001

3 жыл бұрын

In this video I am doing a detailed build of a new bulk pig feeder. This feeder is easy to make and will hold approximately 400lbs of feed. All for less than $100! Give it a try, you'll be glad you did! Sorry about the wind noise in a few of the clips. I hope it is not too distracting and that you can still find some value in this video. Thanks for watching!
Here are Amazon Affiliate links to the items I used and/or disucssed in this video:
55 gallon Plastic Barrell - amzn.to/3kRTeLP
(You can find this on Facebook Mrket place for around $25)
Half Pint of Latex Paint - amzn.to/3t0L5HB
Paint Brish - amzn.to/38ipDWP
Caulk (Cheaper at Lowe's) - amzn.to/3uZ6x1E
Eye Bolts (Cheaper than TSC) - amzn.to/3blYQuy
Lid (Hot Water Heater Drain Pan) - amzn.to/3qt1pzk
Brower SF74 Hog Feeder - amzn.to/38kF4O6
Please follow us on Facebook: / wattswayfarms

Пікірлер: 61

@yvonneedun543 2 жыл бұрын

Thank you for a great video! I will be building this for my 4 pigs (as soon as it warms up and dries up long enough to stay outside to work!)

@WattsWayFarm 2 жыл бұрын

Glad you liked the video. I too have a few build projects in my near future. Chicken brooder and chicken tractors. But like you, waiting on warmer and drier weather.

@johnadams9202 2 жыл бұрын

I'm planning on making a few of these.i made waters out of plastic barrels this year and it's the best thing I've done. Cuts down on chores and wasted water

@Dimas-yy7os Жыл бұрын

Do you have any picture or video?

@conservativecrusader80 5 ай бұрын

Nice design, however the bolts you put in the kevlar hinge you should have just put them in reverse. Having the smooth end of the carriage bolt coming into contact with hog and the nut side on top other than that it's pretty nice.

@chu6645 3 жыл бұрын

Thank you for the excellent idea will be building one this weekend

@WattsWayFarm 3 жыл бұрын

Thanks for checking out my video! would love to hear how your build goes.

@rueldeveyra1256 2 жыл бұрын

Watching from Philippines

@WattsWayFarm 2 жыл бұрын

How awesome! Thanks for checking out my channel!

@okafordavid Жыл бұрын

I am impressed. Thanks

@keithbennett5991 2 жыл бұрын

Great idea

@WattsWayFarm 2 жыл бұрын

Glad you think so!

@taiwanpinoytv7574 3 жыл бұрын

New subscriber from Philippines

@WattsWayFarm 3 жыл бұрын

Thanks for subbing!

@DavidEvert-fb7nk Жыл бұрын

Carriage bolts should be turned the other way so the bolt isn't sticking out where the pigs snout is going in and out.

@WattsWayFarm Жыл бұрын

Perhaps. We haven’t had any issues with it.

@RyersonHazel-ep9yl Жыл бұрын

This is lovely for me has a starter

@tonesncreww1998 3 жыл бұрын

Great vid champ. Going away next week for a few days going too try this😉😁

@WattsWayFarm 3 жыл бұрын

Good luck!

@rueldeveyra1256 2 жыл бұрын

Nice project

@WattsWayFarm 2 жыл бұрын

Thanks. I do enjoy our various farm projects!

@casey197930 2 жыл бұрын

Thanks for sharing! The paint on flex seal is way better, the spray is definitely worthless.

@angkolbalongschannel 2 жыл бұрын

Wow beautiful farm sir..

@WattsWayFarm 2 жыл бұрын

Thanks for the kind words. We feel very blessed to have the opportunity to call this little piece of heaven on earth our own!

@albertod4161 3 жыл бұрын

Cool feeder set up i don't farm but I do watch these sort of videos I saw a video recommending an Osborn pig feeder I don't know the price but it seems to work for them

@WattsWayFarm 3 жыл бұрын

Thanks for checking out my video. I also have an Osborne feeder. There are a couple of videos on it too!

@albertod4161 3 жыл бұрын

@@WattsWayFarm cool 😎

@Wakeywhodat 6 ай бұрын

Nice job. The barrel at TS is $130 now 😮

@bwdrsw 3 жыл бұрын

I like it.. :)

@WattsWayFarm 3 жыл бұрын

us too!

@finallyfriday. Жыл бұрын

Lots of spill. Could a 1x1 lip on the insides reduce that? Maybe 90 degree walls instead of sloped?

@pursuitfarms Жыл бұрын

Nice setup! Question... lasts 4 days...for how many pigs ?

@RubygachaQueen 2 жыл бұрын

Do the pigs knocked down the barrel or is it a sturdy set up . Just concerend if I built it like this I wouldn't have problems of the barrel getting knocked over

@WattsWayFarm 2 жыл бұрын

Really not sure if they would knock over or not. I put a T-post on each side and then a ratchet strap around the barrel just to be safe. never had one knocked over...

@janicealbig2135 2 жыл бұрын

But in 2 weeks you'd have a could seal, now you've just got a waste of product and time... Flex steel always works very good for me..js.. Many Blessings, good content💜

@WattsWayFarm 2 жыл бұрын

I think they make a flex seal that you paint on with a brush. That may have worked better for my application. I don’t know. In the Spring I am going to pressure wash all of my feeders, I may try the brush on flex seal then…. Thanks for the comment!

@MastersFarms 3 ай бұрын

Did this hold up?

@jun2vlog 2 жыл бұрын

God bless you my friend.new subscribe.

@WattsWayFarm 2 жыл бұрын

Thanks for checking out and subscribing to my channel!

@MrFernandezr Жыл бұрын

There seems to be a lot of waste. Did the new design change this?

@andyjones6361 8 ай бұрын

I’d let the feed run out and make them clean up the waste!

@kjmonosr 2 жыл бұрын

what type of feed are you feeding?

@WattsWayFarm 2 жыл бұрын

Back when I made this video I was using a locally milled ground corn/soybean complete pig feed. Since then, I have switched to a pellet version of the same. Still locally milled, still steroid free and growth-hormone feed.

@RandyHurtado 2 жыл бұрын

Thanks for the example but in all fairness to Flex Seal, you admitted not following the instructions and had you read the directions from the beginning, you would have seen the 24-48 hour requirement and you could have returned it and bought caulk.

@WattsWayFarm 2 жыл бұрын

Yup. Fair point. But still don’t think Flex Seal is a good application for raw untreated wood. It just sucks it up like and doesn’t form any sort of seal. Thanks for checking out my video and taking the time to leave a comment.

@livelife.lovelife.5979 Жыл бұрын

I wonder how many days will a full pig feeder last before going empty... Say for 8 pigs

@youjustdontgetit8117 2 жыл бұрын

Are those berky's?

@WattsWayFarm 2 жыл бұрын

I do have berky’s, but in this video those are my mulefoots and mulefoot/Berkshire crosses.

@youjustdontgetit8117 2 жыл бұрын

@@WattsWayFarm I have 3 females 1 male berky...1 more month I will stagger 1 month matings...now the hard part is trying to sell them...what do you suggest is the best way to market other than Facebook marketplace and auctions?

@WattsWayFarm 2 жыл бұрын

@4DoorsMoreWhores We do timed batches as well. Exclusively wholes and halves for now. The "selling" creates the most anxiety in me as I don't do auctions. Can't even cover feed costs there. I use targeted FB ads, and am venturing into Google ads as well. Fortunately, we have a fair amount of repeat customers as well. But so far, we have been able to sell everything we have been able to produce, and the bigger our customer base becomes, the easier it is getting to sell all of our batches.

@christian4ever672 Жыл бұрын

How did this work out for you long term? Did it work for a year?

@FreeAmerican-mm2my 4 ай бұрын

In later videos he is using an Osborne Bulk Feeder. Not sure if he completely abandoned this design.

@basikkilla1 2 жыл бұрын

How long is it in total? From edge of 1 lid/door to the other

@WattsWayFarm 2 жыл бұрын

I don't know. I'll go measure it tomorrow and let you know!

@WattsWayFarm 2 жыл бұрын

Just measured it. It is 47” long from edge of 1 lid to the other. Hope this helps!

@christopherkingrey4411 6 ай бұрын

You don't have a cut sheet attached?

@nickjansen1320 10 ай бұрын

What is the length and width?

@RandyHurtado 2 жыл бұрын

How many pigs do you have?

@WattsWayFarm 2 жыл бұрын

As of right now, right at 35 total (feeders and breeders). We try to have 10 - 15 ready for processors every quarter. But we are scaling up our breeding stock and considering basically doubling that to the 120 - 150 a year range of the market continues to be there for us.

@andyjones6361 8 ай бұрын

Cut the bolts off under the flap!! 😬. I mean why leave it!!