DIY Camping Box

  Рет қаралды 4,112,269

GVM-Corner

3 жыл бұрын

Camping Box Plans: gvm-corner.e-junkie.com
Im Handumdrehen vom normalen Hochdachkombi zum Reisemobil.
Reinstellen, festschnallen, losfahren.
Die Box ist 112 cm breit, 74 cm tief und zusammengeklappt 41cm hoch.
Ausgeklappt hat das Bett eine Länge von 200 cm.
Gesamtgewicht ca. 40 kg.
Gefertigt aus 18 mm Multiplex Birke. Besser wäre allerdings 15 mm, war aber leider im Baumarkt nicht lagernd.
Die Schublade besteht aus 12 mm Pappel- und Birkensperrholz.
Werkzeug*:
Undercover Jig: amzn.to/36eoFsi
Dübel Zentrierspitzen: amzn.to/2BtCSpX
Bohrmaschine: amzn.to/3XABhoy
Akkuschrauber: amzn.to/4342HEf​
Tauchsäge: amzn.to/3e8eGqM
Streichmaß: amzn.to/3iF1w8c
Flachdübelfräse: amzn.to/3yyZHR2
Oberfräse: amzn.to/3i2r8y0
Werkzeug zum Filmen*:
Kamera: amzn.to/2YipyOL
Schnittprogramm: amzn.to/2T5pQ85
Material*:
Vollauszüge: amzn.to/3rZDpWo
Gaskocher: amzn.to/3njhJRy
Matratze: amzn.to/38eFzcW
* Diese Links sind Affiliate Links. Wenn ihr über diese Links etwas kauft, bekomme ich ein paar Cent für die Kaffeekasse. Für Euch kostet das keinen Cent mehr. Vielen Dank!

Пікірлер: 1 660
@hansfreekit
@hansfreekit 3 жыл бұрын
Here's a translation of the Maestro's description... "From a normal high-roof combination to a motorhome in no time at all. Put it in, buckle up, drive off. The box is 112 cm wide, 74 cm deep and 41 cm high when folded. When unfolded, the bed is 200 cm long. Total weight approx. 40 kg.Made of 18 mm multiplex birch. 15 mm would be better, but unfortunately it wasn't in stock in the hardware store. The drawer is made of 12 mm poplar and birch plywood."
@GVMCorner
@GVMCorner 3 жыл бұрын
Thank you!
@bosong8017
@bosong8017 2 жыл бұрын
there are a lot of different plywood, which one should we choose ? Thanks a lot!
@leninmoran896
@leninmoran896 2 жыл бұрын
s
@Abufaqihchannel
@Abufaqihchannel 2 жыл бұрын
Thanks for the explanation @dave coke
@cathys949
@cathys949 2 жыл бұрын
@@bosong8017 If you choose A/B softwood construction plywood, most of the voids will be filled, but it won't look too nice. It will have one "good" side and one secondary side for not showing. You could paint it for appearances. Or you can choose cabinet-quality birch hardwood plywood, which I believe is what was used in this project. Both sides are equally good in appearance. Of course the prices will be quite different.
@janwijbrand
@janwijbrand 3 жыл бұрын
The double hinge spacer solution for folding in the bed-panels was just briljant!
@TarikEddial
@TarikEddial 2 жыл бұрын
Could someone explain to me why this is necessary? what would happen with just 1 hinge?
@janwijbrand
@janwijbrand 2 жыл бұрын
@@TarikEddial It allows the third panel to fold in between the the other two panels.
@questions_galore
@questions_galore 2 жыл бұрын
Yes! Way better design than mine. I also made the mistake of building mine before I had my new 2 burner stove (I built it to fit a single burner stove). The dimensions were wrong (I couldn’t nest the stove into the spot I intended). I ended up having to rebuild 1/2 of it. I also like the idea of making it lighter by cutting out pieces.
@davidmangan8064
@davidmangan8064 3 жыл бұрын
This is so far the best truck camping build I have seen yet. Easy to move in and out and nice design.
@chuckrf1502
@chuckrf1502 3 жыл бұрын
The universal language of carpentry, with a dialect of ingenuity. Wonderful video!
@CoryBurke
@CoryBurke 2 жыл бұрын
Wow, just wow! Loved watching this being put together... Would love to get a chance to learn from and do wood working / cutting with this gentleman. What a nice creation. Was really impressed when the drawer including the cooktop folds out and over to create more workspace! Cheers
@FabiusPyromanus
@FabiusPyromanus 3 жыл бұрын
Your work flow and methods seems so practical and efficient! And such a simple yet effective workshop set up. Truly inspiring!
@ThaGr8Cornman
@ThaGr8Cornman 3 жыл бұрын
Jeez man. Never thought I could fall in love with a project. This is 100% one of the things I would do if I had one wish granted- master woodworking skills
@RamontheDamon
@RamontheDamon 3 жыл бұрын
This is just excellent. It is exactly what I had in mind for my 2006 Ford Tourneo Connect , but seeing it in action + a video of the construction process really helps me out a lot!
@colmacjames8424
@colmacjames8424 3 жыл бұрын
It's an absolute pleasure to watch a true tradesman at work. Brilliant design too. 10 out of 10
@raupke7124
@raupke7124 Жыл бұрын
Was die Liegefläche betrifft, der beste Ausbau eines Dokkers, den ich bisher auf YT gesehen habe. Danke 👍
@seabreezeof
@seabreezeof 2 жыл бұрын
The best part of this build is he removed a lot of excess wood while keeping it integrally strong which equates to good gas mileage. Excellent workmanship, thanks for sharing
@mellyofthespring3365
@mellyofthespring3365 2 жыл бұрын
And it also makes for ease of lifting in and out of the van!!
@kmooney1954
@kmooney1954 Жыл бұрын
Great build and clever ideas - but: I keep hearing in my head "Wooden Pallets". Less work to customize and not as heavy as plywood.
@mertonallowicious
@mertonallowicious Жыл бұрын
@@kmooney1954 as a carpenter/woodworker over 20 years I can assure you the voices in your head are wrong… pallet wood is either weak junk or quite heavy. Plywood is widely used in construction due to its tremendous strength/weight ratio, however stay away from chip/particle board and Mdf- but don’t take my word for it get out and build something!💪
@franl5585
@franl5585 10 ай бұрын
@@mellyofthespring3365 What is the approximate weight?
@mellyofthespring3365
@mellyofthespring3365 10 ай бұрын
@@franl5585 idk, I didn't build it. I think you meant to ask/tag somebody else.
@barbarabauerle3125
@barbarabauerle3125 3 жыл бұрын
Ich bin total begeistert von Deinen Ideen und Deinem handwerklichen Können 👍👍👍 Danke fürs Zeigen 🤗
@MikeB-gj8hf
@MikeB-gj8hf Жыл бұрын
I wasn’t really sure where all the cutting and drilling was going to wind up but in the end it all came together! Very cool idea!!
@CaptZenPetabyte
@CaptZenPetabyte 3 жыл бұрын
Absolutely the best designed and most versatile camping box I have seen throughout my year of research. This has inspired me, thank you.
@TheKodiak72
@TheKodiak72 Жыл бұрын
lol really. Its pretty generic.
@paulelverstone8677
@paulelverstone8677 3 жыл бұрын
I think that is one of the best builds for a 'hatchback' that I have seen!
@dieterliepsch5505
@dieterliepsch5505 3 жыл бұрын
Super Workshop setup mit absolut flexibler Ausstattung und sehr kreativer Umgang mit den Werkzeugen. Das aussparen von Gewicht ist genial. Wirklich sehr kreativ, effizient und inspirierend!
@paulgriffin8566
@paulgriffin8566 3 жыл бұрын
It always amazes me just how inventive and clever people can be. Truly an inspiration to all of us, many thanks for sharing.
@bebbuinc7611
@bebbuinc7611 3 жыл бұрын
I've been camping my whole life. On foot, bicycle, motorcycles, and overlanding. I appreciate an easy and quick setup like this. Awesome.
@richardlau2447
@richardlau2447 8 ай бұрын
Easy when you got skills. Good job playing.
@foresterboy2011
@foresterboy2011 3 жыл бұрын
One word "BRILLIANT" !!. Hope you won't mind me copying your idea as I'm turning my forester into an overlander adventure vehicle. Thank you 😊
@kathyhenderson8703
@kathyhenderson8703 Жыл бұрын
I’m so interested in your post. Would love to do this with my Forester
@jimdean294
@jimdean294 3 жыл бұрын
This is seriously popping huge ideas for camper kitchen issue. Good thinking, thanks!
@till6042
@till6042 Жыл бұрын
DIE Camping-Box. Vorbildlich geplant und eindrucksvoll umgestzt. Eine Wohltat zum Anschauen.
@samcurrie969
@samcurrie969 3 жыл бұрын
I thoroughly enjoyed this video. Spent 4 months traveling australia 12 years ago living out of a ford falcon station wagon and wish I had something even close to this. Well put together and well designed.
@robertwilson1827
@robertwilson1827 Жыл бұрын
There's a company in Australia called Drifta, they have a large selection to choose from.
@tonycardall7334
@tonycardall7334 3 жыл бұрын
I made something similar but my 3rd folding piece just clips onto the 2nd one . I never thought of using a small piece of wood and double hinging it . A great design and well built .
@jillianwiseman4508
@jillianwiseman4508 3 жыл бұрын
Beautiful design and workmanship. Got me excited to think hell ya I could do that! Best build I’ve seen for simplicity and effectiveness. Thx so much for posting the build!!
@rootube808
@rootube808 Жыл бұрын
Brilliant in so many ways. The end result is awesome, the use of tools, squares and guides .Learned heaps, now all I need is a van.
@acolburn23
@acolburn23 3 жыл бұрын
This was a pleasing process to watch. Everything was so precise, well done!
@solosaga5091
@solosaga5091 3 жыл бұрын
I have watched many camp kitchen/drawer builds. I always wondered why no one cut out the "dead" wood, saving weight. Finally, someone did just that. Excellent project! Thank You!
@jackmoorhead2147
@jackmoorhead2147 3 жыл бұрын
You did an excellent job on this. One of the very best I have seen. That includes manufactured or DYI! Your design is the best!
@harleydavo1099
@harleydavo1099 2 жыл бұрын
One of the better designs and minimalist simplicity. Well done.
@PaulWhyte505
@PaulWhyte505 3 жыл бұрын
Could not figure this out until the end, very very clever design, every inch of space used, and as light as possible 👍
@v10moped
@v10moped 3 жыл бұрын
no one could figure it it out. it would have helped if he narrated the process.
@ddyrock
@ddyrock 3 жыл бұрын
Herzlichen Dank, besonders auch für die Ruhe🙏🙏🙏
@steveelkins52
@steveelkins52 Жыл бұрын
Just came across this. I made this for Citroen Berlingo, following the plans, a jigsaw and drill. Rough , but fun and functional! Sold it with the van last month and intend to build a new one this winter, just the same because it works so well (but I will invest in a router to smooth the edges) heartily recommend!
@gooddude9211
@gooddude9211 2 жыл бұрын
By far the best so far all the SUV camper add-ons I have seen in you tube. Very creative and thanks very much.
@NorthernKitty
@NorthernKitty 3 жыл бұрын
Sheer genius!! I've been thinking about converting a cargo trailer into a camper, but I think you've just convinced me that what I should do instead is build modular components and then have "tie-down" points in the trailer to strap them in, so they can be removed or swapped around at any time. Then if I ever sell the trailer, I simply take all the modules out and re-use them elsewhere.
@_GntlStone_
@_GntlStone_ 3 жыл бұрын
It's an awesome little setup. If you could lock the bed in a partial upright position it could also work as a couch. See Ladi & Margaret's youtube channel for the season 1 van tour recap posted recently. One of the tours they cover had a bed/couch setup using ropes & cleats.
@lisat9707
@lisat9707 3 жыл бұрын
Watch Jarrod Tocci on youtube. He did a video on a van that uses modular components that he can swap out completely and replace at any time. He's got lots of videos so you will likely need to search. But it's really worth it. It's a older gray haird man and the interior is a darker gray hope that helps!
@MyDatrsPrsnlATM
@MyDatrsPrsnlATM 3 жыл бұрын
I live in the states, and of course you can buy the expensive pre-built camp kitchens but this was a real treat to watch. Amazing ingenuity and I learned something new!
@artistaloca4
@artistaloca4 3 жыл бұрын
😳 Inventive creation; I could tell early in the video that this build took some real planning but did not expect the finish. Impressive and inspiring!! Thank you for the video Brother ❣️ Happy Camping!! 😎👍👍💯
@GoAndStay
@GoAndStay Жыл бұрын
So glad my drawer system is a work in progress (for 3 years already) and still in planning phase. I get so many ideas.
@davidr7236
@davidr7236 3 жыл бұрын
Love how everyone swoons over the smooth ply and clever curves, missing the lovely editing that made this enjoyable to watch ☺️ I guess the best edits are the ones you don't notice and instead just feel like you're in the room as an observer. Great job on both!
@GVMCorner
@GVMCorner 3 жыл бұрын
Thank you! :)
@jusgibs
@jusgibs 3 жыл бұрын
Absolutely! Great observation! Not only is it an excellent design and build, but the camera coverage and editing is a masterpiece. Must have been over a thousand editing cuts.
@GeorgeToft
@GeorgeToft 3 жыл бұрын
He made it sure look easy. Editing was great, too.
@wienosminosfouxxx2002
@wienosminosfouxxx2002 3 жыл бұрын
@@GVMCorner Respekt. Was kostet ?
@jeffessex6483
@jeffessex6483 3 жыл бұрын
Well said, exactly what I was thinking. Awesome job from all angles👍
@justalurkr
@justalurkr 3 жыл бұрын
Okay, I see why that one guy said a table saw makes things easier. Still don't have room for one, so I appreciate knowing how to get by with a circular saw!
@ryanlangan1060
@ryanlangan1060 3 жыл бұрын
Look for a "track saw" or "poor man's track saw"
@jackmoorhead2147
@jackmoorhead2147 3 жыл бұрын
The speed on the film left no down time, but the design made up for it. I like the custom layout and how it incorporated your sleeping area. Very efficient.
@FlatlandMando
@FlatlandMando Жыл бұрын
Only once in my life I had the freedom of a well equipped woodshop after hours. I could move from one tool to the next to the next with a sense of momentum. Now, years later my own garage is not organized & many tools I cannot afford. Times change I guess but your video reminded me of my most enjoyable wood working times!
@leeowens1598
@leeowens1598 3 жыл бұрын
I wish I was friends with this guy. Love to have him mentor and help me build one for my truck.
@G58
@G58 3 жыл бұрын
Awesome innovative design and build. I love the way you work. Truly inspirational. You gave me several ideas for my own van conversation that will require special compartment for a motorcycle as well as living space, so I’ll be working with a much bigger van. But your folding bed idea is brilliant. Thank you for sharing. Greetings from the UK. Subscribed.
@angeladawn805
@angeladawn805 3 жыл бұрын
I'm planning on doing a "no-build build" for my Nissan Serena, as I don't have the time, money nor skill set. But that doesn't mean that I can't get hopelessly distracted by such beautiful and creative builds (it's also very relaxing!!) Excellent work guys :)
@Brianna114
@Brianna114 10 ай бұрын
obwohl ich wohl nie soetwas brauchen werde und schon gar nicht selbst bauen kann, sitze ich nun vor deinen videos und der kaffee wird kalt 😂 tolle arbeit, auch sehr schön gefilmt und geschnitten. danke für die anregungen und die entspannung beim gucken. 😊
@verdugosk1
@verdugosk1 3 жыл бұрын
This camping box is absolutely amazing! I wish I could build it myself.
@RoyBlumenthal
@RoyBlumenthal 3 жыл бұрын
That is absolutely stunning! What an amazing piece of design! Thanks so much for the vid.
@zeketeccnc1207
@zeketeccnc1207 2 жыл бұрын
Well thought out design. I love your inside cornering technique and your use of gauge blocks. Well done!
@ChrisAndEmilie
@ChrisAndEmilie 3 жыл бұрын
Nicely made! We went with store-bought plastic drawers for our micro camper but we really like the clean lines you get from the custom construction.
@kylekettner6752
@kylekettner6752 3 жыл бұрын
I've built a small square drop camping trailer, and I've been looking for ways to cut weight. For instance, replace large bulky 2x4 bed supports with thin white oak battons. Much less mass, far greater strength. I hadn't thought of using a high quality plywood and cutting out parts of it like that, and it's rounded so they won't split or crack along force concentration lines. Very clever. I'll have to steal that.
@acg397
@acg397 3 жыл бұрын
Jawohl! Hab so gehofft eine Camping Box von dir für den Dokker zu sehen..bin gespannt.
@-xnthis-2115
@-xnthis-2115 3 жыл бұрын
Wow. I wish I was 1/16 as good as this guy at wood working. The pace of this video was perfect.
@AvalonEndures
@AvalonEndures Жыл бұрын
Seeing how this guy gets things done makes me feel better about my skills. I don't suck, I simply lack experience and devices to make the job easier. He made it look so simple... WHICH MEANS it is probably incredibly difficult LoL
@goldi7719
@goldi7719 3 жыл бұрын
Top! Gefällt mir sehr gut von der Funktionalität und Aussehen her😄
@HunterMann
@HunterMann 3 жыл бұрын
It must’ve taken a lot of practice to be able to work that fast, good job man!
@malohairault3363
@malohairault3363 Ай бұрын
the best I ever seen before. very simple, smart and easy to use. Thanks a lot for the inspiration
@michaelmarwede7157
@michaelmarwede7157 2 жыл бұрын
I very much admire people who are so skilled pay so much attention to detail, design and functionality. Very well done und toi, toi, das haben sie richtig gut hin gekriegt.
@brettalfero6245
@brettalfero6245 3 жыл бұрын
Oh wow that’s SO clever!!!! Think I need to make one for my Vito ❤️
@rf6497
@rf6497 3 жыл бұрын
That is so cool. I am converting a bigger van than yours. But it has given me few ideas. So thank you 😁
@robertapel7605
@robertapel7605 2 жыл бұрын
Danke noch mal für deinen tollen Bauplan, ist jeden Cent wert. Meine Box ist nun auch fertig und wie ich finde, dank deiner Vorarbeit, super gelungen.
@GVMCorner
@GVMCorner 2 жыл бұрын
Freut mich, danke!
@how-to-be-a-minimalist
@how-to-be-a-minimalist 3 жыл бұрын
Wow. People never cease to amaze me in beautiful ways. Bravo!
@KorraTheFrenchie
@KorraTheFrenchie 3 жыл бұрын
Found this video randomly. Nice job. I actually really like your home made saw guide too! Perfect!
@justinsummons5404
@justinsummons5404 3 жыл бұрын
This is exactly what I want to build!
@isrightkev
@isrightkev Жыл бұрын
Just bought the drawings, definitely building a modified version. Love how you have taken the weight out, i would never thought of doing that.
@metasurf967
@metasurf967 2 жыл бұрын
You have some serious skills there, sir. Still not sure what is more impressive - your design or your skills. Absolutely amazing!🔥🤙🏼
@nuffink147
@nuffink147 3 жыл бұрын
Brilliant design compact go anywhere van, love it
@AgentFitz
@AgentFitz 3 жыл бұрын
You are a human CNC machine. Nice work!
@maikmichael5243
@maikmichael5243 2 жыл бұрын
Bin total begeistert, genau was ich gesucht habe für unseren Dokker. Genial einfach bzw praktisch gehalten. Vielen Dank fürs Teilen. Plan wird bestellt ;)
@amywalker7515
@amywalker7515 3 жыл бұрын
Amazing what one can accomplish with the proper tools. I'm in awe of outcome and how rapidly it was constructed.
@cutie-44
@cutie-44 3 жыл бұрын
amazing, you did such a great job in making it look easy and doable.
@timmyers1006
@timmyers1006 3 жыл бұрын
Wow, that is so cool. Outstanding job.
@honorharrington4546
@honorharrington4546 2 жыл бұрын
You have to admire a man who refuses to replace dull cutting tools and keeps using them long after they start smoking and burning holes in the wood.
@calisdad3
@calisdad3 2 жыл бұрын
Everyone has seen so many of these van conversions they become boring- except this one. Exceptional !
@emcee2555
@emcee2555 3 жыл бұрын
What a beautiful design! Would love to make something like this for my own vehicle!
@sanericcicafe
@sanericcicafe 3 жыл бұрын
I live in Japan , wanna do diy like you... Wonderful Vanlife!!!
@barfilius
@barfilius 3 жыл бұрын
I love seeing things like this done without a bunch of specialty tools.
@CarlCampbell
@CarlCampbell 2 жыл бұрын
Thanks so much for sharing your process! I'm gearing up to make a plywood pull-out bed + storage cabinet with trays and this video helped provide useful insight into the process and build inspiration. Danke schön!
@adamwalker7338
@adamwalker7338 3 жыл бұрын
Bravo! What a good smart job. Throw that brave hound a bone for protecting you during your labor.
@amywalker7515
@amywalker7515 3 жыл бұрын
For a minute there I thought I was reading one of my own comments.
@salvatoreamore6860
@salvatoreamore6860 3 жыл бұрын
Bellissimo. Una soluzione stupenda. Bravo
@larryr.burfield1893
@larryr.burfield1893 2 жыл бұрын
Like the weight saving cutouts and beveled edges, nice craftsmanship. Will make one this month
@camtak5
@camtak5 Жыл бұрын
I love that your floor is tiled but your walls are OSB. I LOVE it.
@EdnilsonEstevam
@EdnilsonEstevam 3 жыл бұрын
Obrigado por compartilhar! Parabéns!! Eu estava necessitando de um projeto justamente como este!!
@saxmanru
@saxmanru 3 жыл бұрын
Thanks! This is the best I've seen presented on KZfaq. You inspired me, I'll build a for my Peugeot Tepee. I'm your subscriber.
@ikecampos1521
@ikecampos1521 3 жыл бұрын
? ,, ,,,,,,z x
@dermotmcglinchey282
@dermotmcglinchey282 Жыл бұрын
Well done sir 👏👏👏thank you for showing us your carpentry skills..Absolutely loved your work because you made it beautifully simple..👍👍👍
@user-pj8mw8wh9b
@user-pj8mw8wh9b 3 жыл бұрын
Очень порадовала концовка. То,как всё продумано) молодец, автор! Отличная работа!
@tomcoyt
@tomcoyt 3 жыл бұрын
That's a perfect fit, nice!
@stevenb7794
@stevenb7794 2 жыл бұрын
Great to see a craftsman at work. fantastic job
@mannu8084
@mannu8084 Жыл бұрын
You just made it look so simple and cost effective. I liked the sink and water tap its super cost saving.
@larrykostopulos1332
@larrykostopulos1332 3 жыл бұрын
Bloody Good Mate. This would probably work for my Ford station wagon too.
@davidr7236
@davidr7236 3 жыл бұрын
Most Aussie comment 🤣
@pebahessen2542
@pebahessen2542 3 жыл бұрын
Einfach genial, genial einfach. 👍😎
@Response1980
@Response1980 2 жыл бұрын
thank you for taking the time to make this it gave me some good space saving tips
@roadtripmitch
@roadtripmitch Жыл бұрын
A true Craftsman, Excellent work and design. You're the first person on YT that knows how to mount a piano hinge. I cringe every time I see them upside down, LoL. Thank You!
@Hugovl
@Hugovl 3 жыл бұрын
Excelente projeto. Parabéns!
@laurentbalcer8776
@laurentbalcer8776 3 жыл бұрын
Superbe travail,propre simple et efficace ,bravo 😉
@Abufaqihchannel
@Abufaqihchannel 2 жыл бұрын
You are indeed extraordinary,not just making,but you have also thought about making the drawer lighter on the scale,you are amazing
@rvail136
@rvail136 Жыл бұрын
Not at all what I'mlooking for but this is a well designed and executed bed/chuck wagon box. Master cabinet maker fro the US. Well done sir!
@lebon2002be
@lebon2002be 3 жыл бұрын
I love it ! Just perfect ! Give us inspirations. Thank you.
@NORPUde
@NORPUde 3 жыл бұрын
WoW.., sowas möchte ich für meinen T4 haben. Kompakt, alles was man für ein paar Tage braucht und gut zum Zwischenlagern im Keller/Garage. Saubere Arbeit... :) Wenn jetzt noch eine kleine Zeichnung mit Maßangaben / Material für einen schmalen Euro zum runterladen dabei wäre, bekommt es auch ein Hobby-Bastler hin. ;) LG NORPUde
@Jeppe.P.Bjerget
@Jeppe.P.Bjerget 3 жыл бұрын
What a amazing project. I been dreaming of something like that for my car for some years now. Easy to stop were you want, to make some food or to sleep a few hour before you hit the road again. Just love it. Best wishes from Jan in Norway
@GVMCorner
@GVMCorner 3 жыл бұрын
Thank you!
@frederictomaland9442
@frederictomaland9442 9 ай бұрын
Bravo. Travail étudié, réalisation soignée et mise en œuvre rapide ! Génial
0% Respect Moments 😥
00:27
LE FOOT EN VIDÉO
Рет қаралды 37 МЛН
INO IS A KIND ALIEN😂
00:45
INO
Рет қаралды 20 МЛН
Can they find the ruler in the bracelet?
0:34
Valja & Maxim Family
Рет қаралды 10 МЛН
Прорыв в мире ДРИФТА: шины Toyo Tires
0:22
ЛАЙФСТОРИ
Рет қаралды 2,3 МЛН
Пузыри на шине 🤯
0:20
FATA MORGANA
Рет қаралды 6 МЛН
С Какой Высоты Разобьётся NOKIA3310 ?!😳
0:43
Koshyl_Live
Рет қаралды 2,8 МЛН