DIY - Carburetor Replacement On Lawn Tractor With Briggs & Stratton Engine

  Рет қаралды 421,276

donyboy73

11 жыл бұрын

Does your lawn tractor leak gas or run poorly?
Easy to follow instructions from The Small Engine Doctor on how to replace the carburetor on your lawn tractor with a Briggs & Stratton engine.
Buy carburetor here; www.repairclinic.com/PartDetail/Carburetor/799727/2120404?RCAID=1000076
Carburetor is part #791886
Visit my channel for more repair videos;
kzfaq.info?feature=mhee
Don’t forget to click the 🔔 to turn on Video Notifications for more money saving videos and tips, featuring all the brands like Stihl, Husky, Husqvarna, Honda, Echo, Tecumseh, Dolmar, Makita, Poulan, Ariens, Briggs and Stratton, Murray, John Deere, Craftsman, MTD, AYP, etc.
Help me make videos or buy me a beer!!
patreon.com/donyboy73
Connect with me on these social media spaces (plus that's where I announce contest winners)
Facebook: Donyboy73-The-Small-Engine-Doctor-on-KZfaq-234040803408166/
Twitter: donyboy73
Instagram: donyboy73
If you enjoy my videos make sure to comment, share, thumbs up and subscribe. Thanks for watching!
Easy to follow and thorough step by step tutorials do it yourself (DIY) to help you with your broken lawn and garden equipment including snowblowers.
I do my best to teach you how to easily diagnose problems the fastest, quickest and most efficient way with real repairs beyond just replacing a spark plug. These tips are for both the homeowner and shop owner.
Whether it be a handheld, two stroke, two cycle engine like a chainsaw, weed eater, weed wacker, string trimmer, grass trimmer, line trimmer, hedge trimmer, strimmer, brush cutter, leaf blower, or four stroke, four cycle units like a lawnmower, wood splitter, lawn tractor, snowblower, pressure washer, generator or a ride on mower that needs parts installed or replaced, I’m your go-to guy.
My favorite brands of spark plugs are NGK and Champion and are the ones I recommend.
I’ve been a small engine mechanic for many decades and also run my own repair shop so my videos are loaded with tips and tricks that I have learned and want to share with you. You will also find many tool and product reviews from top brands on my channel as well.
I have the largest Small Engine Repair Video Library on KZfaq and the entire internet with over 1200 videos, just GOOGLE "DONYBOY73"!
I want "DON THE SMALL ENGINE DOCTOR" on KZfaq to save you time, frustration and most importantly, MONEY with my HOW-TO videos!
Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. DONYBOY73 “The Small Engine Doctor” assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. DONYBOY73 “The Small Engine Doctor” recommends safe practices when working with power tools, hand tools, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not DONYBOY73 “The Small Engine Doctor".
#donyboy73 #db73 #smallenginerepair #howto

Пікірлер: 320
@fhoward772
@fhoward772 4 жыл бұрын
thanks for the info. this helped out really goood.
@Candoit2
@Candoit2 Жыл бұрын
Exce!!ent instructions and video! I really needed that information since I am replacing the carb on my old (22 years) 42" Craftsman mower. I'm 82 years old and getting forgetful 😊. Thank you!!
@cgrscott
@cgrscott 11 жыл бұрын
I'm a simple person. I love listening to and watching small engines run. It's very satisfying to see and engine running after not starting for after a year and a half. I experienced a similar scenario after your videos helped me to get an 18-year-old gas trimmer going that had not started for three years.
@mapa5871
@mapa5871 8 жыл бұрын
Your video is so clear that it make me impatient to replace my carburetaor . Bravo !
@donyboy73
@donyboy73 8 жыл бұрын
+Ma Pa lol
@382dsl
@382dsl 5 жыл бұрын
Absolutely great video. Replaced the carb on my 23 year old Murray with a B&S 14.5 motor. Couldn't have been easier. Thank you!
@donyboy73
@donyboy73 11 жыл бұрын
you're welcome dude, just in time for spring repairs
@buckstaffvvile9064
@buckstaffvvile9064 5 жыл бұрын
Beautifully done video. I'm dreading replacing a carburetor on my old Bolens, so this was very timely for me.
@deadman12078
@deadman12078 7 жыл бұрын
Got a free Craftsman LT1000. It had been sitting outdoors for at least five years. Both the rear tires were flat... Replaced the carburetor for $89, Rear tire tubes for $26 and the blades for $32 and later the mower deck belt for $16, air filter $14, oil change $4, cup holder $5. It runs great and has earned its keep already this summer. You can't appreciate a lawn tractor until you've spent 30 years pushing a mower....
@matthewnoland4808
@matthewnoland4808 4 жыл бұрын
Great vid!!! I kept scrolling on other vids that took me nowhere but this one was right on point. Thanks for doing this for people!
@DerickZ28
@DerickZ28 7 жыл бұрын
Thanks so much for this video! I'm doing this, this weekend along with adjusting the valves and changing the oil.
@woodywoodman8799
@woodywoodman8799 8 жыл бұрын
One of the best-presented and useful instructional videos. Many thanks.
@ohyeah3750
@ohyeah3750 6 жыл бұрын
Every time i watch your videos i want to run out and start working on one. But since it is about 11pm here, i think i will wait. Thanks for another good one.
@jakesnake_27
@jakesnake_27 11 жыл бұрын
Excellent vid, I replaced the carb on my briggs 12.5 flathead a couple years ago and it fixed a surging problem the engine had
@TONY63557
@TONY63557 3 жыл бұрын
Great video. I was wondering where all of those small plastic pieces that came with the new carb went. I have been searching for days. The way you explained the choke process, Great video.
@davecourtois5142
@davecourtois5142 8 жыл бұрын
You make my day... I clean my carburetor, put it back in place, and the engine never work so well!-)
@bigchevy350boy
@bigchevy350boy 3 жыл бұрын
Never changed a carb on one of these things. Epic video! Explains it perfectly! I appreciate it! Subscribed to your channel 🤘🏻
@jean-mariefritz45
@jean-mariefritz45 2 жыл бұрын
Thanks Donyboy, you made a great job, very helpful.
@josephbaker6517
@josephbaker6517 9 жыл бұрын
I work on mowers in my spare time here in texas and 2 times last year I had customers said motor ran at way to high r.p.m. well I found the screws fell out of the butterfly for throttle and of course the screws on one got imbedded in head butterfly did not make it past valve the other butterfly broke in half never found it and 1 screw have you ran into this problem thanks for all the time you put into teaching everyone how to repair the machines
@davehildebrand1742
@davehildebrand1742 5 жыл бұрын
Excellent Video with step by step instructions. I found that the choke control lever was a little different that the original. There was a small plastic vertical knob that interfered with the air filter housing. I simply cut the little knob to make it like the original carb. Don't forget to attach the solenoid cable to to the bottom of the Carburetor. my 14.5 hp engine has never run better.
@dylangorman1592
@dylangorman1592 8 жыл бұрын
Thank you so much for posting this video it was very helpful.😀😀
@elijahthomas7855
@elijahthomas7855 4 жыл бұрын
hey brother you are the best. you just helped me alot, am helping a buddy of mine fix lawn mower, so this was very helpful brother thank you so much.
@margothorpe7020
@margothorpe7020 6 жыл бұрын
I've been looking and looking for this info! Good quality, easy to understand video. Thank you very much.
@leodanryan966
@leodanryan966 7 жыл бұрын
Hey Donyboy, I applied this video to my Murray 17hp Tecumseh engine, and it worked out beautifully. I appreciate your help! Thanks
@donyboy73
@donyboy73 7 жыл бұрын
you're welcome
@thelegendthokk6719
@thelegendthokk6719 6 жыл бұрын
So freaking helpful. Only complaint is I didn't find your video sooner. Well done.
@donyboy73
@donyboy73 6 жыл бұрын
thanks Walter, make sure you're subscribed
@wilburwright780
@wilburwright780 3 жыл бұрын
You’re the man! Thanks so much for saving precious time
@tomsnyder5324
@tomsnyder5324 4 жыл бұрын
Partstree had it in stock. THANKS for your assistance.
@florican07
@florican07 9 жыл бұрын
Great video Donyboy. Very helpful. Thanks.
@tomasvera5362
@tomasvera5362 11 ай бұрын
Very well done! Easy to follow and understand. Thank you!
@dwighthall4955
@dwighthall4955 6 жыл бұрын
Thanks brother, I found part cheap on Amazon with your help. It's on it's way. Thanks again
@wilvertperez
@wilvertperez 10 жыл бұрын
God bless you always donyboy you are a good person you help millions of people.thanks again
@donyboy73
@donyboy73 10 жыл бұрын
thanks
@donyboy73
@donyboy73 11 жыл бұрын
thanks joseph
@donyboy73
@donyboy73 11 жыл бұрын
thanks Mike
@NutmegThumper
@NutmegThumper 5 жыл бұрын
Nice video - I have a slightly different carb - 593432 for a Snapper RideOn - but this was still a help and love that it is high quality video.
@marktuominen9413
@marktuominen9413 3 жыл бұрын
Excellent video! Thanks. Exactly what I needed.
@snaponjohn100
@snaponjohn100 11 жыл бұрын
Great video, Dony!! Very informative! (As usual). God bless you both. John
@conradhomestead4518
@conradhomestead4518 3 жыл бұрын
Very helpful! Thanks for sharing your knowledge!
@TheStephenpieroway
@TheStephenpieroway 8 жыл бұрын
Great video Don. As usual!!
@BocephusMaguire
@BocephusMaguire 11 жыл бұрын
Good job! I do those all the time.
@donyboy73
@donyboy73 11 жыл бұрын
i'm going to use it for future videos
@alysonscottnow
@alysonscottnow 3 жыл бұрын
So well done and clear and helpful. Thank you!!!
@donyboy73
@donyboy73 3 жыл бұрын
Glad it was helpful!
@donyboy73
@donyboy73 11 жыл бұрын
thanks patrick
@theluckymanfrom
@theluckymanfrom 5 жыл бұрын
Very informative video! Thanks for sharing it.
@donyboy73
@donyboy73 11 жыл бұрын
always improving, thanks for watching
@mrbluenun
@mrbluenun 11 жыл бұрын
Thanks for the video and the details which I would have found very useful when I had the smaller 3.5 HP engined grass cutter.
@LeLilley1
@LeLilley1 5 жыл бұрын
Great job!!! I'm going to try this!!!
@goodguyfdr
@goodguyfdr 10 жыл бұрын
Thanks for your videos. They are clear and understandable. I now have a mover that is running like new. Its 12 years old Thank Again
@donyboy73
@donyboy73 10 жыл бұрын
you're welcome
@ReDact45
@ReDact45 11 жыл бұрын
Fascinating. Great camera work.
@donyboy73
@donyboy73 11 жыл бұрын
thanks man
@geinerlo1659
@geinerlo1659 7 жыл бұрын
You are so good teaching God bless you e.g...you help me a lot with your videos thank you very much
@ssciarini1
@ssciarini1 8 жыл бұрын
Thank you!!! Runs great now.
@MyIrishumor
@MyIrishumor 11 жыл бұрын
dony - Great video - just bought a Craftsmen 15.5 HP 42" Lawnmower Tractor. This thing has not been used in a couple of years I think. I am ignorant when it comes to this kind of stuff. Am now retired so am going to have to learn. Your video is very good with the exception of sometimes the attention to detail in camera work and instructions for us administrative types is lacking, but it is the best I have found yet on You Tube. Try to focus in on the links, springs, etc. Watch your fingers
@henrygonzalez1201
@henrygonzalez1201 7 жыл бұрын
Another Great Job, Thank you!!!
@donyboy73
@donyboy73 11 жыл бұрын
nice to hear
@donyboy73
@donyboy73 11 жыл бұрын
thanks
@tomsnyder5324
@tomsnyder5324 4 жыл бұрын
Will try them. Thanks
@gerritweterkamp1488
@gerritweterkamp1488 4 жыл бұрын
This was a good explanation,thanks!🇩🇰👍
@GoodVibeHomesRE
@GoodVibeHomesRE 2 жыл бұрын
Donny you're awesome! I appreciate you
@Deadbuck73
@Deadbuck73 11 жыл бұрын
Simply the BEST!
@donyboy73
@donyboy73 11 жыл бұрын
getting one soon
@stevelee4653
@stevelee4653 2 жыл бұрын
thanks for the video extremely helpful!!!
@one234569and10
@one234569and10 8 жыл бұрын
I have a JD 155c that I want to do this too, but instead of replacing the carb, I want to perform maintenance. Do you have any videos that show how to do that? Will be checking in a sec.
@mashyken
@mashyken 2 жыл бұрын
reat video, sat laptop on my workbench while replacing my carb. Great presentation and great explanations. the former carb was flooding out the engine. With new carb on it ran, but smoked like crazy. I figured the exhaust was full of oil and gas from the former flooding so went and cut grass for 40 minutes. It eventually cleared up mostly, but not all. I am wondering why it would now smoke and if it could be the valves? I had lockup on start and found a video on setting the valves and that solved the starting issue, but why would it now smoke?
@CullenJWebb
@CullenJWebb 9 жыл бұрын
This was exactly what I needed. I feel confident enough to repair my carburetor on my own now. Thanks so much!
@frankie2234
@frankie2234 8 жыл бұрын
I enjoy your channel. Thanks.
@zx8401ztv
@zx8401ztv 11 жыл бұрын
Smashing tutorial as allways :-) So nice to fit new parts that you know are spot on :-)
@assgrabberb
@assgrabberb 10 жыл бұрын
Love this video. My grandma's lawn tractor wont stay running unless the choke is closed but eventually sputters out anyways after a few minutes. Should I just do this and replace the carb?
@whalershockeymemories8332
@whalershockeymemories8332 11 жыл бұрын
Thanx for answering, and your video`s are helpful!
@patrickmccoy2205
@patrickmccoy2205 10 жыл бұрын
Thanks for a great Video DonyBoy
@donyboy73
@donyboy73 10 жыл бұрын
you're welcome
@archstanton5215
@archstanton5215 11 жыл бұрын
thanks,........ will do this weekend.
@davidholt2335
@davidholt2335 9 жыл бұрын
Thanks donyboy
@DannyMoses
@DannyMoses 11 жыл бұрын
Thanks a lot, got one coming.
@mikevanin1
@mikevanin1 7 жыл бұрын
Very useful, thanks Donyboy - the video is also a very good quality. I came here to see how the governor cable and spring hooks up to the throttle butterfly lever. I am reinstalling my carb (after a strip, clean and paint of the entire tractor) and the throttle stays open all the way - just with more or less tension according to the plastic slider position that is controlled by the throttle cable. Is this right or should the governor close the throttle when the throttle cable is pushed to the idle position?
@sigzor302620
@sigzor302620 10 жыл бұрын
Excellent, thanks.
@Persn1ckety
@Persn1ckety 5 жыл бұрын
Good stuff my friend.
@augustharlacher5660
@augustharlacher5660 2 жыл бұрын
great video! THANKS!!!
@susanshelton8004
@susanshelton8004 2 жыл бұрын
Great detail on this video as always on your great site. Thank you!
@donyboy73
@donyboy73 2 жыл бұрын
Glad you enjoyed it!
@TOMA21207
@TOMA21207 11 жыл бұрын
Great video dony, as always. :)
@jerryhenry662
@jerryhenry662 3 жыл бұрын
nice work
@johndubois8876
@johndubois8876 10 жыл бұрын
Thanks for great video. I have fuel 'standing' in the carb throat. I paper toweled it out and tried to start,but it starts then stops like running out of gas. Is float stuck?
@uber.whyman5869
@uber.whyman5869 7 жыл бұрын
Very good , thank you
@flywelder
@flywelder 8 жыл бұрын
Dony, once again an excellent video! very helpful! very easy to follow! clear steady video, no camera shake! the best on you tube! Danny would you be able to show us how to clean this carb, and maybe rebuild it? Cleaning would be great because I have to do mine very soon, and the engine and carb look almost exactly as this one. I followed your other video where the engine is in the vise. very good, but the carb is not exactly as this one. and I don't want to miss cleaning any hole or orifice. Thanks Dany And have you done a video on cleaning and tuning up a big brigs flow jet on a horizontal shaft engine like a 12 hp.? as I could use that video also soon! Thanks again.
@jathquigley1
@jathquigley1 10 жыл бұрын
how many turns out do you need to set the mixture screw
@ashagon
@ashagon 7 жыл бұрын
Don I followed your video very closely, the new carb went on great. Lawnmower started right up, but keeps surging. when i put the throttle to low it runs smooth, but when I try to get some speed it starts to surge and then quits. What can I do to get this running better? Thanks for the video and help.
@donyboy73
@donyboy73 11 жыл бұрын
thanks for watching
@PeterAgostiniJdcap26
@PeterAgostiniJdcap26 11 жыл бұрын
Symptoms of why part/carb needed to be replaced ( for example bad solenoid )? Great Vid Doc!
@enginelover1
@enginelover1 11 жыл бұрын
Nice vidoe Dony!
@Tommyr
@Tommyr 11 жыл бұрын
Awesome and detailed as usual1 "Liked"!
@wcjcnc
@wcjcnc 8 жыл бұрын
The filter on that mower is made for systems with a fuel pump. I guess it has been working fine. Always wondered what difference it makes.
@JoopSpijkers
@JoopSpijkers 3 жыл бұрын
Many thanks from Italy. compliments. very good video. also audo very good. Helpfull.
@donyboy73
@donyboy73 3 жыл бұрын
Glad you enjoyed it!
@jamesmullins3219
@jamesmullins3219 10 жыл бұрын
good video...thanks
@ackack1
@ackack1 10 жыл бұрын
Thanks Eddie. I had thought of JBW but not with a coat hanger. I may try it if I can think of a way to support the hanger while it is drying. Maybe I could leave the carb on the engine (drying position would be horizontal) and set the hanger on a wood block laid at the bottom of the engine compartment. Another way might be to remove the carb and lay it on its side on my workbench and just hold the hanger in place for however many minutes it takes for the JBW to firm up enough to hold it.
@futureshock7425
@futureshock7425 7 жыл бұрын
Nice video , I was working on a similar engine today on a tractor that has been sitting for years, emptied the old gas out and still wouldn't start i will use your video as a guide to clean the carburetor, do you think it is all gummed up?
@JimB7215
@JimB7215 11 жыл бұрын
Great video, I have 2 questions: 1) how long did the replacement take? 2) when you work on machines, do you do any clean up? like power wash?
@ronservice1708
@ronservice1708 4 жыл бұрын
Thanks!!!
@neilphoffmann3175
@neilphoffmann3175 8 жыл бұрын
Do you have any videos for the Kohler Command 14 Pro Series engines used on John Deere and Scotts 42" lawn tractors? General Maintenance, oil change, carb service , etc.?
@LIUSAAAA
@LIUSAAAA 11 жыл бұрын
thanks dony another great video , hows progress with your shop construction going latley?
@acuentawib4150
@acuentawib4150 5 жыл бұрын
Question: where I connect the black wire that comes from the solenoid? Please help!
@Rustaponi
@Rustaponi 7 жыл бұрын
Dony I have a carb prob. Same as the one u did in this vid. It has a different solenoid on the bottom of the bowl. It was leaking so I tightened the solenoid and it broke. Can I replace the solinoid or do I have to replace the carb???
@ezequieldelacruz76
@ezequieldelacruz76 10 жыл бұрын
I am in need of help. How do you install a "switch stop"? I'd really appreciate it, thank you.
@romeomaloco3180
@romeomaloco3180 7 жыл бұрын
Is that type of carb not rebuildable? Is it not necessary to put some locktite on all the bolts you are putting back? Nice video!! Thanks for sharing your talent.
HOW DID HE WIN? 😱
00:33
Topper Guild
Рет қаралды 18 МЛН
Пробую самое сладкое вещество во Вселенной
00:41
Vivaan  Tanya once again pranked Papa 🤣😇🤣
00:10
seema lamba
Рет қаралды 31 МЛН
Popping green grap jelly!- got these in Japan
0:16
Priya kumari
Рет қаралды 21 МЛН
Обморожение Пальцев Альпиниста
0:18
Илья Калин
Рет қаралды 1,2 МЛН
Survival skills: A great idea with duct tape #survival #lifehacks #camping
0:27
😆 @SantiOficialll @SantiFansshort
0:13
Santi
Рет қаралды 4,7 МЛН
Невероятный талант😮
0:20
Лайтшортс
Рет қаралды 11 МЛН
路飞被小孩吓到了#海贼王#路飞
0:41
路飞与唐舞桐
Рет қаралды 6 МЛН