DIY CNC Mist Cooling System For less than $30 + UCCNC Setup

Рет қаралды 48,109

4 ай бұрын

DIY CNC Mist Cooling System for my CNC Milling Machine.
Half a day of work and about $30. This is all you need to get better surface finish on your parts, less tool breakage, less heat etc.
Everything connected to a AXBB-E UCCNC Controller:
👉 cncdrive.com/AXBB.html
Parts used:
Coolant system: 👉pl.aliexpress.com/item/100500...
3/2 Solenoid Valve: 👉pl.aliexpress.com/item/100500...
Quick Connectors: 👉pl.aliexpress.com/item/100500...
If you find my channel interesting or helpful - you can consider becoming my Patron on Patreon.com or a Member of my KZfaq Channel Support!
Subscribe and hit the like button if you like the video and want more!
👉 / gbwm
👉 / @gbwm_cnc
Questions? - Comment down below.
Thanks for watching!
DIY 20 Ton Hydraulic Press: 👉 • How To Make a 20 Ton H...
DIY Metal Band Saw: 👉 • How To Make a DIY Meta...
CNC Conversion of a Milling Machine: 👉 • CNC Conversion - Manua...
Milling Machine Restoration: 👉 • FUS 200 Universal Mill...
DIY CNC Metal Lathe Build: 👉 • DIY CNC Metal Lathe Build
Machine Builds: 👉 • Machine Builds (full v...
CNC Videos: 👉 • CNC
Welding Videos: 👉 • Welding
DIY: 👉 • DIY HowTo
Facebook Page 👉 / gbwmcnc
KZfaq Channel 👉 / gbwmweldingmachiningcnc
Twitter 👉 / gbwm6
Instagram 👉 / gbwm_cnc
Tumblr 👉 / gbwm-cnc
TikTok 👉 / gbwm_cnc

Пікірлер: 68

@fedeyoutub 3 ай бұрын

nice system, well done👍. Anyway, yes, I agree, the air becomes saturated with lubricant, it hurts. especially if the cnc is not closed. Use a protective mask or close the cnc if you use it a lot. However, the cooling must be placed behind the tip so that it lubricates the cutter blades as they sink and not in front where it only lubricates the surface of the material and not the cut. the ideal is to have multiple nozzles surrounding the tip. Keep it up, beautiful cnc.👌

@GBWM_CNC 3 ай бұрын

thanks for the hints! damn, so many people hit me up with this - I wasn't even aware. I'm wondering if this is the case if I use just a little of liquid to make it just a little greasy. And yeah - I didn't think about lubricating the blade from behind. Maybe someday in a bigger machine I'll make surrounding nozzles as you say - that's a good idea!

@mosfet500 3 ай бұрын

Te trouble with mist coolants is you're breathing the coolant in, it's even worse in a small home shop.

@GBWM_CNC 3 ай бұрын

Could you expand your thoughts? I mean, does other coolants are so bad too? I'm machining once a week, sometimes twice a month and usually not much.

@swooshjj 2 ай бұрын

is a dust shoe relevant and compatible with a mist system ? that would keep the air cleaner . plus a good air cleaning system , i think this is mandatory in any shop .

@mosfet500 2 ай бұрын

@@swooshjj I don't know, I use Cool Tool II which is pretty safe. When I'm concerned about smoke I use AnchorLube 771 which I also use if I'm going to weld a part as it's soap, not oil based, also on SS. Anchorlube is good on stainless, just wipe it off your lathe bed or it will stain (Cool Tool II won't stain).

@willyrodriguez867 3 ай бұрын

Buenas tardes siempre aprendo con sus videos soy aficionado a cnc y uso el mismo programa y controlador AXBB-E en mi maquina casera, soy argentino residente en España lo del mate es una pausa muy buena😅😅 un saludo.

@GBWM_CNC 3 ай бұрын

¡Me alegra que disfrutes de mis vídeos! ¡Saludos desde Polonia!

@TrPrecisionMachining 3 ай бұрын

good video my friend

@GBWM_CNC 3 ай бұрын

thank you! :)

@dawidwrona4793 3 ай бұрын

Jest yerba !

@GBWM_CNC 3 ай бұрын

Obiecana! ;)

@IceCreams62 3 ай бұрын

Nice and useful video as always....but please leave the text for more time 🙂

@Tedlasman 3 ай бұрын

Now gotta make a mist collector

@GBWM_CNC 3 ай бұрын

that would be a thing

@CATANOVA 14 күн бұрын

Because the stuff will coat everything in the entire workshop if you don't.

@GBWM_CNC 14 күн бұрын

@@CATANOVA it does!

@CATANOVA 14 күн бұрын

@@GBWM_CNC Having given oil based water mist cooling a good working out I also tried water cooling. Much cleaner and no problem if it makes its way in to the environment. Water cooling isn't quite as good as an oil based coolant in terms of ultimate finish and of course rust prevention however it does work and is practically no cost.

@GBWM_CNC 13 күн бұрын

@@CATANOVA Well - I'm using mostly air with just a little bit of water mixed with some coolant fluid

@hikolanikola8775 3 ай бұрын

hah, it's almost better then my baby reusable coolant system :)

@GBWM_CNC 3 ай бұрын

whaaaat?! :D

@incubatork 3 ай бұрын

Rather than bolting to the machine you could use strong Neodymium magnets and stick it to almost any machine in the workshop that needs coolant mist. By sealing up the oil can reservoir will in not create a vacuum and collapse as the liquid is drained?

@GBWM_CNC 3 ай бұрын

I wanted to have it attached to the cnc controller of the machine. I'll make a similar setup for my next cnc lathe project. But that would be a good option

@nileshtonage7048 3 ай бұрын

Please make lathe project soon

@GBWM_CNC 3 ай бұрын

@@nileshtonage7048 Working on it, but there are some sideprojects going on parallel.

@IceCreams62 3 ай бұрын

Hi. And now that you have implemented the M8 command could you please check if the ''M8 delay after off:'' truly works on 'after off' or as i suppose it works on 'after on' like the M7 command ? Thanks in advance

@GBWM_CNC 3 ай бұрын

Yes, I'll have the chance to check it next weekend - i'll try it and let u know

@IceCreams62 3 ай бұрын

@@GBWM_CNC Thanks a lot, of course when you will have time 👍

@GBWM_CNC 3 ай бұрын

@@IceCreams62 Both M7 and M8 delays do works "after on" on my machine

@IceCreams62 3 ай бұрын

Thanks a lot...so the UCCNC panel is wrong...hope they will update it in a future relase Have a nice day😊

@GBWM_CNC 3 ай бұрын

@@IceCreams62 It seems so. Weird that nobody noticed that earlier. Sometimes I do contact them so I'll let them know when I have an occasion. Have a nice day too!

@AdamMaszynotwor 3 ай бұрын

Ja z takiej mgły zrezygnowałem na rzec cyklicznych krótkich siknięć ja z rurki od WD40 bo w garażu aż siwo po paru godzinach pracy

@GBWM_CNC 3 ай бұрын

Pewnie się przekonam po pierwszej konkretniejszej robocie. Może będzie się dało coś z oryginalnym makro M8 pokombinować, żeby w taki sposób działało bo faktycznie też co chwilę się kompresor włącza przy takiej pracy.

@Ekrsk 3 ай бұрын

cześć, mógłbym zadać kilka pytań? -jaki masz kompresor? litry na minutę -co sądzisz o axbb-e? -da radę na nim odpalić linuxa?

@GBWM_CNC 3 ай бұрын

Cześć! - kompresor nie pamiętam, muszę sprawdzić - axbb-e jest mega intuicyjne i trochę bardziej nowoczesne niż np mach3, ogólnie polecam - linuxa nie odpalisz, jedynie mach 3 / 4 / uccnc

@ernestovasquez2102 2 ай бұрын

I have a CNC ShopSabre router I would like to add a mister to. Any ideas?

@GBWM_CNC 2 ай бұрын

What are the doubts related to?

@ernestovasquez2102 2 ай бұрын

@@GBWM_CNC Just curious what brand/mister to add to the CNC. Its a 5’x10’ CNC router.

@GBWM_CNC 2 ай бұрын

@@ernestovasquez2102 That way. Well - this mist was bought from Aliexpress (link in desc). I don't have any experience about other ones though. This one works fine for now.

@Galaxy58rus 3 ай бұрын

Здравствуйте. Как настроить такой же интерфейс linuxcnc как у вас? Подскажете? Крутой..

@GBWM_CNC 3 ай бұрын

это UCCNC, а не linuxcnc

@OlivierDM 3 ай бұрын

No to będziem zażynać kompresor... Ale co tam. Tanie są.

@GBWM_CNC 3 ай бұрын

Niech się spłaca! :)

@OlivierDM 3 ай бұрын

@@GBWM_CNC Ja bym pomyślał o wentylatorze odśrodkowym na silniku indukcyjnym i coś a'la pistolet malarski. Podejrzewam, że efekt byłby ten sam ale znacznie ciszej.

@nuovovideo 15 күн бұрын

do you use just water?

@GBWM_CNC 12 күн бұрын

Water with fluid coolant

@dawidwrona4793 3 ай бұрын

Sie z tego zrobił ASMR

@GBWM_CNC 3 ай бұрын

Mam nadzieję! :)

@pawekowalski7469 3 ай бұрын

👍

@cavediverRS 3 ай бұрын

Un polaco que habla español y bebe tereré??? ¿Debes ser paraguayo? 😂 Gracias por otro buen video.

@GBWM_CNC 3 ай бұрын

¡Sí! Me encanta la yerba mate. Cada vez es más popular por aquí :)

@cavediverRS 3 ай бұрын

@@GBWM_CNCAquí en casa (sur de Brasil) lo tomamos todos los días. Con agua caliente y yerba verde, el nombre es chimarrão. Con agua fría o helada y yerba seca curtida se le llama tereré.

@juhavuorinen3945 3 ай бұрын

Cutting fluid fumes are not very healty to breath. I have try those mist coolant systems my basement and i don't like those

@GBWM_CNC 3 ай бұрын

Much worse than burning engine oil or welding fumes?

@powershop1903 3 ай бұрын

Coolant mist = C A N C E R

@Felix-rk5eo 3 ай бұрын

If you buy shitty coolant, yes but not if you have a certified one 😂

@GBWM_CNC 3 ай бұрын

This is really interesting - so many people posting this over here. What about other coolants? I've been using old engine oil for sooo long and it was evaporating as crazy!

@Zwariowny 3 ай бұрын

120zl to chyba części z Alli były, czemu frez się złamał?

@GBWM_CNC 3 ай бұрын

Zgadza się :) A frez się złamał najprawdopodobniej przez zbyt duży posuw na ząb dla 4-ostrzowego frezu. Mimo mgiełki rowki się zapchały, wiór nie miał gdzie uciekać no i się złamał. Pominę fakt, że to był frez z zestawu 10 sztuk, które kosztowały 39zł z Chin więc też raczej nie był najlepszej jakości.

@GBWM_CNC 3 ай бұрын

W opisie linki do elementów zakupowych, które użyłem.

@Zwariowny 3 ай бұрын

@@GBWM_CNC yyyy nie ma nic

@GBWM_CNC 3 ай бұрын

@@Zwariowny a było... już poprawione :)

@be007 3 ай бұрын

I wonder how unhealthy mist coolant is? because you are breathing in those chemicals without knowing it. You don't see coolant mist in the space where you breathe, but it is there. so if you get cancer in 10/20 years' time, you can think about the coolant mist that you regularly inhaled. This is not meant to make you anxious, just to make you think about it. cheers ben.

@GBWM_CNC 3 ай бұрын

Oh snap. Its just hobby use so i dont spend so much time in that mosty atmosphere though