Рет қаралды 5,279
En este tutorial veremos como pulir opalo con cantera con ayuda de un motor( dremmel, moto tool, foredom, etc) de forma casera.
para este trabajo usaremos un motor con Chicote (es mas facil el manipularlo).
un disco diamantado.
lijas de agua 280 y 600 (la mas delgada que tenemos).
agua (para evitar que se caliente la piedra).
y pasta verde para darle brillo al final al opalo.
es un proceso sencillo, solo lleva un poco de tiempo el realizar este trabajo.
QUIEN GUSTE ADQUIRIR UN KIT DE FRESAS Y DISCOS DIAMATADOS ESTA ES LA OPCION: amzn.to/3ijG5OE
PARA QUIEN NO TENGA AUN UN MOTOR PARA PULIR, ESTE PUEDE SER UTIL PARA EMPEZAR:
amzn.to/3VXRoKs
PARA QUIEN DESEE ADQUIRIR COBRE, PUEDE BUSCARLO EN DONDE VENDAR MATERIAL ELECTRICO O EN UN CHATARRAL, EN ESTE ULTIMO LUGAR PUEDE VENIR MALTRATADO. O SI QUIEREN RECIBIRLO HASTA LA PUERTA DE SU CASA SOLO SIGAN ESTE ENLACE:
amzn.to/3idPQhB
PARA QUIEN OCUPE ADQUIRIR PASTA PARA PULIR SOLO SIGA ESTE ENLACE:
amzn.to/3jWPwnS
CONSEJOS GENERALES AL TRABAJAR ALAMBRE:
👉 Al trabajar por mucho tiempo lavarse las manos con agua tibia.
👉 Tener buena iluminación para no forzar la vista.
👉 Cuidar la posicion de la espalda para evitar que con el tiempo se canse rápido o haya dolor en ella.
👉 Hacer rollos pequeños de alambre para que no se maltrare.
👉 Ir enderezando el alambre conforme se va trabajando si es necesario.
👉 Tener las pinzas aflojadas para hacer mas facil el trabajo.
👉 Para dar brillo al alambre: pasar lija fina al alambre después pasar un trozo de piel o tela gruesa al alambre para quitar lo sucio, si se tiene pasta para pulir poner a la piel o tela.
👉 Tener taz (yunke) y martillo siempre liso para no dejar marcar en el alambre.
👉 Si la pinza de corte no tiene filo, pasar un poco la lima para sacar filo nuevamente.
👉 Hacer bien todo trabajo desde el inicio, para que hacer bien el trabajo sea lo común.
👉 Como saber la equivalencia entre calibres y milimetros: • TABLA DE REFERENCIAS D...
si conocen a alguien que le pueda servir esta información agradecemos le compartan el tutorial.
o si conocen a alguien que quiera aprender esta labor de igual manera agradecemos le compartan el tutorial.
asi mismo si gustan apoyarnos compartiendo nuestro canal en grupos relacionados o no con la joyeria artesanal se los agradecemos.
solo es copiar este link:
/ @elartedelshinobiz
Esperamos les sea util la información.
Dudas o sugerencias favor de dejarlas en los comentarios.
In this tutorial we will see how to polish it with quarry with the help of a motor (dremmel, moto tool, foredom, etc) in a homemade way. For this work we will use a motor with Chicote (it is easier to manipulate it). a diamond blade. 280 and 600 sandpaper (the thinnest we have). water (to prevent the stone from heating up). and green paste to add shine to the finish. It is a simple process.
If you know someone who can serve you this information, we appreciate sharing the tutorial. or if you know someone who wants to learn this work in the same way we appreciate sharing the tutorial. Likewise, if you like to support us by sharing our channel in groups related to artisan jewelry or not, we thank you. just copy this link: / @elartedelshinobiz We hope the information is useful to you. Questions or suggestions please leave them in the comments.
GENERAL TIPS WHEN WORKING WIRE: 👉 When working for a long time, wash your hands with warm water. 👉 Have good lighting so as not to strain your eyes. 👉 Take care of the position of the back to avoid that over time it tires quickly or there is pain in it. 👉 Make small rolls of wire so that it does not mistreat. 👉 Straighten the wire as you work if necessary. 👉 Have the clamps loosened to make the job easier. 👉 To shine the wire: apply fine sandpaper to the wire then pass a piece of leather or coarse cloth to the wire to remove the dirt, if you have polishing paste, apply it to the leather or cloth. 👉 Always have a smooth taz (yunke) and hammer so as not to mark the wire. 👉 If the cutting pliers are dull, use the file a little to get sharp again. 👉 Do all work well from the beginning, so that doing the job well is common. 👉 How to know the equivalence between calibers and millimeters: • TABLA DE REFERENCIAS D...
#pulirminerales #tallarminerales #lapidaria #comopulir #pulidocasero #minerales #piedras #pulirconmotor #pulircondremmel #pulirconforedom #pulir #comotallar #puliropalo #opaloencantera #lapidariacasera