In this video I explain my Crank but No Start issue with my 06 Buick Lacrosse 3800 Series III. It finally gave a P0335...Also I explain how to use the Harmonic Balance puller to access the Crankshaft Position Sensor.
Пікірлер: 52
@gregsmitz6310 Жыл бұрын
Great video, my Lacrosse started stalling out just after starting it but only once in a while. I thought the gas was the issue till one day while driving on the highway, it just died. After getting it towed to my favorite shop, they found the same problem. I have a 2007 Buick Lacrosse that I use for work.
@kevinwells4888 Жыл бұрын
I'm not having this problem yet but thanks to you I'll be ready when I do. Great job.
@mndronenut51092 жыл бұрын
Thanks for sharing there's not many videos on the 2006 Buick lacrosse and the ones I have watched shut off video before doing the replacement then turn on after it is installed. Not sure what they were thinking the install is most important part. Thanks again!!!!
@cedmac33662 жыл бұрын
yep...I made this video specifically to help with that. Please reach out if you have any other questions...I would love to help. 💪💪
@zhodge02 ай бұрын
It helps me. thank you.
@cedmac33662 ай бұрын
Glad to help 😎
@1418yamil2 жыл бұрын
Thanks for the detailed information!👍👍
@cedmac33662 жыл бұрын
Glad to help 👍🏾👍🏾
@paulsosa18722 жыл бұрын
I have a Buick lesabre with the 3800 been having intermittent crank no start I'm suspecting this is the problem with the crank sensor.
@jaytube227 Жыл бұрын
Thank you sir!!
@supernintendo7579 Жыл бұрын
BRO!! TYSM!!
@cedmac3366 Жыл бұрын
Did you fix yours?
@LIFEOFDARRICK2x2 жыл бұрын
05 lacrosse mines doing the same thing I gotta try it like 5x for it too work
@cedmac33662 жыл бұрын
Yep more than likely this is the cause...hope this fixes your issue... keep up updated 👍🏾
@905maxp Жыл бұрын
Would love to talk ced I have crank no spark on a 3800 s3 09 allure
@cedmac3366 Жыл бұрын
Any questions? Reach out and I'll try to help.
@brianfraser78228 ай бұрын
My 2008 lacross cxl does same,,,
@nonapplicable68852 жыл бұрын
Do you have to take off the belt
@cedmac33662 жыл бұрын
Yes you have to take off the belt
@jaytube227 Жыл бұрын
Do you have to reset the position sensor data after install or it just works?
@cedmac3366 Жыл бұрын
Good question...No need to reset anything...it just works like it should
@mikewalz927210 күн бұрын
I have a 2005 buick lacrosse cranks but wont start ive replaced camshaft sensor
@cedmac33668 күн бұрын
@mikewalz9272 have you scanned it for any codes?
@tylerirelan32462 жыл бұрын
I have an o9 lacrosse last year 1st gen. I have redone EVERYTHING myself. Anyone need help lmk. I'll make videos. Doing the cps today!
@cedmac33662 жыл бұрын
💪💪
@supernintendo7579 Жыл бұрын
Is it the same as the 2007 lacrosse? 3.8
@cedmac3366 Жыл бұрын
@@supernintendo7579 yes it's the same
@BIGGDOGGBAMABABE95 Жыл бұрын
I have a 07 Buick lacrosse and I cranks it up and it cranks, but it doesn’t drive or reverse .. but it’s running fine
@brianfraser78228 ай бұрын
My 2008 buick lacross ,crank no start,,,,,changed crank sensor,,,,,still crank no start,,any idea ?,,,
@cedmac33668 ай бұрын
Check fuel pump. You can try some starter fluid in the throttle body and If it starts then dies again, your fuel pump is bad
@cedmac33668 ай бұрын
Also...are you getting any trouble codes?
@cedmac33668 ай бұрын
Any updates?
@brianfraser78228 ай бұрын
@@cedmac3366 still crank ,no start!,,,
@cedmac33668 ай бұрын
@@brianfraser7822 is your check engine light on?
@youngdeity666 Жыл бұрын
Is there a relearn procedure with an 06, Buick lacrosse I installed new sensors that did not work (EBAY) put my old ones back in then it started right up! I’m duped brother please help
@cedmac3366 Жыл бұрын
I did not have to do a re-learn. It started up soon as I put everything back together. What issues are you having?
@cedmac3366 Жыл бұрын
Also...what sensors did you replace?
@youngdeity666 Жыл бұрын
@@cedmac3366 prior to me installing “new” camshaft/crankshaft sensors the car would stall out. Crank no start at times if I’m on the freeway the car would not cut off but if I was on the streets or came to a stop sign the car would cut off! The auto zone brand Duralast is most current one that I have BUT THE CAR STILL CUTTING OFF. I even sprayed the electrical connectors with some CRC electrical cleaner. I’m baffled as what to do. Lastly I’m dealing with intermittent cut offs.
@youngdeity666 Жыл бұрын
@@cedmac3366 additionally when I inserted those fake ass sensors from eBay the would only crank! Just cranking then I put old ones back in to troubleshoot my issues and like I said I put old ones back in they started right up! Which tells me that those sensors was no GOOD. Oh also no check engine lights at ALL. But when I went to auto to use there advanced ODB reader the results came back cranksenors issues respectfully.
@cedmac3366 Жыл бұрын
@Young Deity ok...I believe you triggered the Crank/Cam position sensors when you tried to replace them. So now let's move foward to the intermittent cut-offs...First my vehicle never just cut-off intermittently. Either it started or just cranked with no start. For you I would try to unplug your Mass Air Flow and drive it around and see if it cuts-off. If not, then replace it.
@905maxp Жыл бұрын
Ced man I have an issue with a 3800 can we talk my man kind regards sincerely Maxwell
@cedmac3366 Жыл бұрын
What issues are you having
@905maxp11 ай бұрын
@@cedmac3366 hey my man it was a no start lots of crank issue on a 09 allure I used your video and ordered the proper puller I completed the job today man she started right up the cam sensor smelled like a burnt circuit board when soldering so I was assuming it was toast by your video and luckily it was I appreciate the post and the reply my man
@cedmac336611 ай бұрын
@905maxp That's was up!!! I'm glad it worked for you!! The reason I made the video was to help. Good job and thanks for posting an update!!! 💪🏾😎💪🏾
@905maxp11 ай бұрын
@@cedmac3366 your welcome my man look me up if ever in Niagara Falls Ontario Canada Maxwell Pacey