Love the fact that it’s a simple production line as well. Saw. Drill. Glue. Screw. Repeat.
@TheEMTCodeGOD2 жыл бұрын
Excellant job, you might want to put a wall bracket on the back of it, as if you pull out more than two shelves, the cabinet could tip over, and spill the precious product.
@miker99512 жыл бұрын
Yes, more , definitely. Shop projects are great, non-shop projects are just as great. Keep them coming. It makes my whole day better every time I see you posted a new video. I am just a hobby woodworker from the U.S. I probably have more tools then the average person, but no where near as many as the professional. Your channel is the perfect balance for me. Thank you, I not only enjoy your channel, but I appreciate it. Cheers!
@andreamakesthings8512 жыл бұрын
I'm only 44 seconds in but I heard the words "future plans" and now I'm VERY excited. Looking forward to making one of these for my dad and my friends (being the only teetotaller in our group means I don't need one!).
@koolBOY83232 жыл бұрын
a similar design would be a great way to organize paints, stains, and odd chemicals. so really, this is a shop project too :)
@DaveGDesigns2 жыл бұрын
Nice project buddy I always laugh to myself cos you’re drill sounds like the battery is dying every time you screw anything together. 😆
@ericmyers88822 жыл бұрын
More of these type of projects would be appreciated.
@DrewToner2 жыл бұрын
Non shop related items? But of course!! That's what wood shop junkies do!! Looking forward to more, non shop related items!!
@AngieWilliamsDesigns2 жыл бұрын
I love this. I can think of so many ways to change this design up to make other things. This is great. I look forward to seeing the more complex version
@WilYanaga2 жыл бұрын
I'm loving the new direction of your channel. I've enjoyed every video of yours and can't wait to see what's next!
@zachlang46912 жыл бұрын
Great idea. Might make one as wedding gift for a friend!
@rocksarecool32852 жыл бұрын
These are some of the best videos on you tube. The simplicity of the project but a great finished product. If I want to add a more advanced joint, then I can easily decide where to do that myself. I would like to see more of these videos👍
@suepfister45932 жыл бұрын
Definitely love to see both shop and non-shop projects on your channel.
@TeddyR_Official2 жыл бұрын
This is one of the things why we need a workshop. 😉 Would like to see any projects you can do in the workshop. I need inspiration and ideas. Thanks. 👍
@Djkudos142 жыл бұрын
dear Sir, I must say your ability to "deconstruct" a concept build and provide alternative methods is very inspiring. too bad I live in another country or I"d hire your services for some cabinetry work in my home. cheers!
@Yackhammer752 жыл бұрын
Great work. I would be happy to see any and all of your projects. One never knows where inspiration will come from and I can see this project being adapted to something for the shop as well as a bedroom. One just never knows.
@paceves44032 жыл бұрын
Thank you! This is something I could even make and I look forward to your plans. Great work.
@v.m.s.15362 жыл бұрын
Greetings from Germany. Awesome Projekt. It is always a pleasure to watch you doing your craft.
@swyerdon2 жыл бұрын
Looks great and i hope you continue to make similar videos.
@globetrotter6832 жыл бұрын
Yes more please. GR8 content. Stay safe.
@rogerlareau76212 жыл бұрын
Ye please keep on doing it this was great.
@SweSuf2 жыл бұрын
Excellent project! More of this kind would certainly be highly appreciated.
@shanehertzog58122 жыл бұрын
I really liked your superb work great ideas like timber holder I love your belt sander holder you are so smart. You are a genius. Australia.
@MCsCreations2 жыл бұрын
Beautiful work, dude! Really interesting project! 😃 Stay safe there with your family! 🖖😊
@MrKirby3652 жыл бұрын
I will watch anything you make
@kisarader2 жыл бұрын
great job gave me loads of ideas would love more videos like this
@michaelsnell40342 жыл бұрын
At the beginning of the video, it already looks like a good tool drawer.
@RunarMagnussen2 жыл бұрын
Definitely enjoyed this! I don't mind non shop projects at all.
@benparry53182 жыл бұрын
That's an awesome project. Keep them coming! I love the shop projects, but there are so many more cool things put there are lots of other awesome projects like this that are worthy of some screen time.
@TtheConqueror2 жыл бұрын
Yes more. Pretty solid work.
@7885003jds2 жыл бұрын
Nice work, really liked the project.
@howardbecdove97802 жыл бұрын
Nice video. Will give this a go once I’ve seen the upgrades 😃 Thanks for the content. Yes, it would be good to see more content like this.
@mymemeplex2 жыл бұрын
You can even make this with standard pine stock from the big box store, using a hand saw. Have them cut the large panel to size for the sides an top bottom.
@jeffforbes37722 жыл бұрын
Great design and execution. Well done.
@W4TRI2 жыл бұрын
Looking forward to the plans. Thanks!
@harindergill72212 жыл бұрын
Great concept, design and excellently paced video. Thanks
@keggyification2 жыл бұрын
Nice little project there Jean. Excellent video presentation too.
@Julian-yx4we2 жыл бұрын
Wow, I'm always so impressed with your planning as well as the finished product. Really awesome and thanks for the clear explanations!
@mandimusic51092 жыл бұрын
This could be great inside a standard kitchen cabinet, too! Love it. New subscriber, saw your Reddit post featuring workshop organization.
@MickeyG19992 жыл бұрын
Excellent content as always Jean. Would love to see more like this.
@EliH70402 жыл бұрын
I need the plans to this immediately! Lol. Great build
@Golfexpertbelieveme2 жыл бұрын
Nice man. Love the video. Can’t wait for your plans
@niellangner36682 жыл бұрын
Almost 200K subscribers! Well done!
@RossRawlins2 жыл бұрын
Your shelves should be at an angle. The wine should always be in contact with the cork. Just an FYI
@spinfiredubai2 жыл бұрын
Exactly what I was about to comment, you should never have the cork exposed to air. The wine will go off. Also you should use the playing card trick to space your drawer fronts, will give you a more uniform spacing. I love this project by the way, would love to see this made from old oak wine barrels...
@asktheraccoon2 жыл бұрын
I think he can fix that with the felt he’s talking about adding.
@alexreith48772 жыл бұрын
But if the bottles are unopened then the amount of air in the bottle is small enough that the cork is fully in contact with the wine when the bottle is horizontal. I can't imagine storing a half empty bottle.
@RichWoods232 жыл бұрын
@@alexreith4877 I can't imagine half-emptying a bottle...
@willpall2 жыл бұрын
Level bottles always cover the cork in wine. No need to angle them downward.
@gaz7402 жыл бұрын
Nice project Jean.
@PeterB_California2 жыл бұрын
Well done!
@Tom13GN2 жыл бұрын
That was awesome!!! Well done!!
@expatmousse51962 жыл бұрын
Very nice, would like to see more👍🏻
@jeremygreenwood85012 жыл бұрын
Clever design......
@davetaylor20882 жыл бұрын
Love it, nice work as always.
@janmalan4712 жыл бұрын
I am planning to do so.ething similar soon, nice job. When I do endgrain screws like you are doing in this project I try to srew them at an angle, or if not possible do dowels perpendicular to the grain to havesome cross grain for the screws to grab on.
@mikeowen18192 жыл бұрын
Really good video - many thanks. If you were to continue to refine your design, you could increase the router/chamfer on the bottle slats at one end to ensure that the bottle is not level but tips slightly one way. That would allow you to store bottles with corks slightly downwards to keep the cork moist. This is not really an issue for screw-top bottles I accept!
@shawnr7712 жыл бұрын
Nice project.
@frizellculley12382 жыл бұрын
Really nice 👍
@gm24072 жыл бұрын
I like that if you wanted to you could carve a design on facings and screw it in. Therefor having a simple well built cabinet with a nice facade.
@bourbonthebiscuit2 жыл бұрын
Awesome 👌
@lesd402 жыл бұрын
Very nice
@GREGPRETORIUS2 жыл бұрын
Lekker pella!! Nice uit gekom!
@daveaydelotte68692 жыл бұрын
Perhaps you would consider tilting the bottles so the neck is lower, helping to insure the cork remains wet.
@johanjacobs24422 жыл бұрын
Baie netjies gedoen. Goeie video werk.
@pieterleroux48412 жыл бұрын
Baie netjies 👍🏻. Ek het soortgelyke een gemaak uit Kiaat. Het nou besteling vir een uit populier. Lyk werklik goed in “deur” hour.
@gocausta4 ай бұрын
Bu dolap benim işimi görür.
@donzebrak36142 жыл бұрын
Looking forward to making the DIY Drawer Wine Rack - Simplified Assembly For Beginners. when do you think the drawings will be available?
@skogsmats2 жыл бұрын
Luxriversion, put a coolingdevice. A back and small window as the. Should make wine little lower temperaturer.
@rickcover9301 Жыл бұрын
Great video! Be nice to have the dimensions
@shanehertzog58122 жыл бұрын
Do you have plans for your lumber timber rack.?
@ender155310 ай бұрын
Love the work and look forward to seeing the upscaled one! What size of roundover bit did you use? 3m? 4.5? 6m?
@ender155310 ай бұрын
Bought your plans to support you and your channel! But one big question still… what size drawer slides did you use! I could guess that you probably used 14” ones (355ish mm) as you talked about the side panels being 16” in the video, but confirmation would be nice!
@phabi0Ай бұрын
What happens if the cabinet is full and you open all the drawers?
@jaron19902 жыл бұрын
Just a question... I see you connect all the large boards (top bottom and two sides) to the skeleton using two screws and glue, where the grain direction is perpendicular between the two. Can't it be a problem in terms of wood extension and contraction? Thanks!
@jefffaucett504111 ай бұрын
I downloaded the plans, thanks! Do you know what size and number of sheets of laminated pine you used to make this?
@rtpeda Жыл бұрын
Do you have the dimensions for this wine cabinet available somewhere? Would love to not have to figure those out along the way. Love the final piece!
@WoodshopJunkies Жыл бұрын
The plans are available on my plans website. thewoodworkersplans.com
@AmiteshNaidu Жыл бұрын
Hey mate that's amazing video and wine rack. I am looking y building something similar but with a Dept of 80cm. This will allow me to keep two rows of bottles. Now the question comes to what type of runners do I use? Do I use two sets of what you have done or build a long 80cm rack but will that hold the accumulated weight of 16 bottles?
@WoodshopJunkies Жыл бұрын
You are going to have to shop around to see if there is an 800mm runner option and if so what is its capacity.
@rollenroch Жыл бұрын
Cheers! Tried to access the plans. I don't use Pay Pal so that fails. Pay Later doesn't work either. They both fail with the same error - Ooops Something went wrong... Any way to get these other than Pay Pal? Oh, by the way, "Add to Cart" doesn't work either. Thanks very much!
@mazchen2 жыл бұрын
7:09 featuring the Invisible Screwdriver (TM) :-)
@avibank2 жыл бұрын
This would make a good base for a tool cabinet. What is that socket looking screwdriver thing you used in your drill?
@wadesam62322 жыл бұрын
It is a magnetic screw holder.......probably by Dewalt.........Makita's look different
@Davet9982 жыл бұрын
It will be interesting to see if the cross grain glue joints on the top cause any issues down the road.
@mattkirms2 жыл бұрын
Any plans on this?
@unicornsquadforever95696 ай бұрын
How do I download the plans?
@NicolasPappasA2 жыл бұрын
Boet!! This is flipping brilliant!! Amazing job...Any plans for sale for this?
@WoodshopJunkies2 жыл бұрын
Coming soon!
@NicolasPappasA2 жыл бұрын
@@WoodshopJunkies thank you, can't wait.
@mileilibasic2 жыл бұрын
Hi, are you sure it's pine, it looks like spruce to me in color. Often big stores sell spruce and it says pine.
@thewarpsyrhead2 жыл бұрын
verstommend!!
@jts8651 Жыл бұрын
That’s going to warp/split
@jansivok2022 жыл бұрын
Will there be plans in centimeters? - fan from Slovakia
@WoodshopJunkies2 жыл бұрын
Plans are drawn in milimeters (Metric) but also include a direct conversion to inches. Both measurements are on the plans.
@jansivok2022 жыл бұрын
@@WoodshopJunkies OK, thank you. How can I get plans to make a stand ?.
@WoodshopJunkies2 жыл бұрын
@@jansivok202 they will be posted within a few weeks. I will announce the new plans store here on my channel.
@jansivok2022 жыл бұрын
@@WoodshopJunkies OK thank you and keep your fingers crossed for the next work.
@jeandrecoetzer90622 жыл бұрын
Awesome idea!! Enjoy watching your videos. Are those solid panels or laminated shelving panels? Where do you get those panels in SA?
@volla402 жыл бұрын
Laminated panels, available at most Builders Warehouses
@volla402 жыл бұрын
The wider panels (600mm+) do have a tendency to cup slightly
@jeandrecoetzer90622 жыл бұрын
@@volla40 I previously used some laminated pine sheets but the ones he used in the video seems to not show the joints. the ones available in my town have finger joints inside the panel
@marthakozul17472 жыл бұрын
How do I get your plans
@WoodshopJunkies2 жыл бұрын
I am still working on setting up a plans website but you can get the plans here: thewoodworkersplans.com/product/diy-drawer-style-wine-rack-easy-woodworking-plans/
@jeanloreaud92822 жыл бұрын
Video très intéressante,mais trop de paroles !!! à bientôt salut Jeannot 🛠😉
@manuelcerqueira69352 жыл бұрын
Can you send me the plans?
@TheLukemcdaniel2 жыл бұрын
Why do you skip the 'er' in "drawer"?
@Automative2 жыл бұрын
Nice design and assembly. Not the best idea to glue up a pieces with perpendicular wood grain directions. Glued boards tend to get split.
@ShadowzGSD2 жыл бұрын
i have no interest in wine or storing wine bottles, this looks like a really nice way to store spray paint though.
@shawnr7712 жыл бұрын
He has an earlier video about just that. It is on the wall in the shop.
@mplussant2 жыл бұрын
…more…
@embwee2 жыл бұрын
Please stop with the BBC endings for nearly every sentence, akin to a teenage girl ending every sentence with a question??
@gregoryunderwood412127 күн бұрын
It's his accent, deal with it.
@shrutibagde5732 жыл бұрын
Awesome work!! Hey, this is from Family Handyman, we are really interested in your video and want to feature it on our brand. Please share your Email address or any social media handle so we can share the information with you. Thank you.
@WoodshopJunkies2 жыл бұрын
Hey, you can get in touch at admin @ woodworkjunkie .com
@shrutibagde5732 жыл бұрын
@@WoodshopJunkies Great! I will be sending an email with all the information right away. Thank you.