DIY Dual Battery Install - Landcruiser 70 series V8

No video

DIY Dual Battery Install - Landcruiser 70 series V8

Рет қаралды 66,929

Күн бұрын

A Complete DIY dual battery setup for your V8 70 Series - 2007-2017 models.
Comes complete pre-wired and terminals, in cab momentary switch, redarc BCDC 1225D, BCDC mounting bracket, stainless battery tray and full instructions to install.
All you need is a battery.
Our 316 stainless battery tray will accommodate the new MY17 76/78/79 series and earlier models.
We have designed this battery tray to secure our Unichip modules to it, sbi solinoids, relays (spotlights, intercooler etc) and designed by the end user/installer and has been customised to the markets needs.

Пікірлер: 52

@fatchunk3678 7 жыл бұрын

Absolute bloody credit to you guys for making such a well thought out kit, mint.

@peterhaberland9388 5 жыл бұрын

Thanks for all your advice. You blokes at PDP are cool and have a great body of knowledge. Regards Pete.

@rjl110919581 2 жыл бұрын

THANK YOU FOR SHARING THE VIDEO WITH OTHER

@Figanzi49 5 жыл бұрын

Great video. Everything well explained. Thanks

@barra69 7 жыл бұрын

Thanks a lot guys much appreciated.

@rockeater 5 жыл бұрын

Very professional guys

@johndiaz7240 5 жыл бұрын

Good stuff, well thought out.

@rollyb5061 7 жыл бұрын

thanks Travis very great tips and worth watching, learnt a few things ,thanks

@sauddaham Жыл бұрын

Would this fit a LHD vdj76 ?

@Chris8duvenage 7 жыл бұрын

Always very informative videos, thank you for that.

@PITTYNOTFOUND 7 жыл бұрын

@theacreelife 3 жыл бұрын

Great looking install. Really makes me want to clean up my system. Previous owner looked like he did it all himself and its a spaghetti western under the bonnet. Im too scared to pull anything apart in case it all stops working.

@PerthDieselPerformance 3 жыл бұрын

Sometimes you just have to start from scratch - Start off by removing all the Accessories and then tackle the wiring - best to remove the whole lot and start fresh. Always have a game plan or end goal before you start. if you need any advice or need a solution give us a call

@liammckenna5639 4 жыл бұрын

Love drilling holes in new cars

@PerthDieselPerformance 4 жыл бұрын

We don't like to either that's why we pick up on factory locations where ever possible - Fitting a battery tray in does require some drilling - if Our instructions are followed there is no detrimental effect on the vehicle

@PerthDieselPerformance 7 жыл бұрын

Links to purchase some of our products: DIY Battery Setup: perthdiesel.store/products/diy-dual-battery-setup-76-78-79-2007-2017-model Battery Tray: perthdiesel.store/products/stainless-battery-tray-76-78-79-2007-2017-model BCDC Bracket: perthdiesel.store/products/bcdc-bracket-v8-70-series BCDC Bracket & Charger: perthdiesel.store/products/redarc-bcdc-1240lv-with-custom-mounting-bracket-v8-70-series-landcruiser

@sand_shifter 6 жыл бұрын

Will do thanks

@dannyoconner9680 2 жыл бұрын

1) have u made battery trays for hiluxs . N79 ? 2) how did u wire up the SBI12 ~ blue ang black wires ? Thanks about to do this install on the 2016 76 cruiser

@slptravel3189 4 жыл бұрын

Very nice, I brought my 79 2nd hand and the wiring is a bit all over the shop, would be ideal to have something like this I do have one question though, why would you run both Redarc Isolator as well as Redarc BCDC? Is the isolator just for joining the 2nd battery for cranking when the main is flat ?

@PerthDieselPerformance 3 жыл бұрын

So sorry for the late reply - we use the sbi solenoid as a battery link for when you accidentally flatten your main you can crank from your Aux Battery

@Wadaryu1000 3 жыл бұрын

Would you know anyone in NSW that can provide this kit and level of service?

@PerthDieselPerformance 3 жыл бұрын

Darren at Eagle Autos in Camden has Fitted Our catalogue of parts - Otherwise we can send the kit to Your preferred mechanical workshop

@dannychen1281 4 жыл бұрын

Hi PDP, may I know what is the torch you are using in the video?

@B.D1111 6 ай бұрын

Do you always use the intercooler as a work bench ? Lucky its not my cruiser

@PerthDieselPerformance Ай бұрын

Yes because putting down a spanner on the intercooler is going to damage it....

@rodmcleod3072 2 жыл бұрын

Hey Travis, what is the secondary battery in the last part of the clip please ?? Is it one you recommend ??

@PerthDieselPerformance 2 жыл бұрын

Hi Rod, We use and recommend the Delkor HDC27 - 100Ah deep cycle and Cranking.

@rodmcleod3072 2 жыл бұрын

@@PerthDieselPerformance great, thank you... I see it's on the way.. Great service and usual.

@jamessunjaya21 5 жыл бұрын

Trav the 2018 has an accessory fuse box mounted to the side rail where your two bolts go into the body. Does that need to be moved as well?

@PerthDieselPerformance 5 жыл бұрын

We have a stainless steel bracket that mounts to Our fuel manager kit to hold the fuse box if required - in most cases these are discarded as they are not actually connected to any electrical accessories

@graemelowry3044 6 жыл бұрын

Hi great videos. I see you specialize in Toyotas but do you do these sort of kits for other makes?

@PerthDieselPerformance 6 жыл бұрын

Graeme Lowry just the kits for the 70 and 200 series at the moment. What car do you have?

@alexpoultney7783 2 жыл бұрын

Does this kit come with the battery link switch?

@PerthDieselPerformance 2 жыл бұрын

Sure does - Everything is included in the kit.

@alexpoultney7783 2 жыл бұрын

@@PerthDieselPerformance awesome, Thank you!

@jasonswift7098 7 жыл бұрын

Ok cool that is informative but when are you going to do a reveal on the grey dual cab that you put the 35" tyres on etc.

@PerthDieselPerformance 7 жыл бұрын

Soon! Almost finished the build. We have been busy 3D scanning the whole car and some new products are being CAD drawn up at the moment.

@jasonswift7098 7 жыл бұрын

Ok then thank you, look forward to it. Do the new my17 cruiser's with the DPF pose much of a problem with tuning or do you just DPF delete?

@PerthDieselPerformance 7 жыл бұрын

We wont remove the DPF. We have left both our cars standard with DPF and other than no V8 note from the exhaust, no issues with tuning or performance.

@BSHWKA 6 жыл бұрын

What are the dimensions of the tray? And what is the most common secondary battery you install?

@PerthDieselPerformance 6 жыл бұрын

cr2Fiddyrider 320mm x 200mm we use a Delkor HDC27. All details are on our website on our online store

@sand_shifter 6 жыл бұрын

Do you guys have a kit for a 200. Series 2014 gxl ?

@PerthDieselPerformance 6 жыл бұрын

We will have a DIY kit early next year. Keep an eye on our youtube channel as we will do a video on the install

@petercooke7348 6 жыл бұрын

What's the going rate for the parts and install?

@PerthDieselPerformance 6 жыл бұрын

Peter Cooke the DIY deluxe kit is $1790. You can get the basic kit shich doesnt have the sbi or momentary switch and is $1495. Installed at our shop with a Delkor battery is $2250.