DIY Easy CD Slot Tablet Mount For Less Than $7!

Рет қаралды 85,847

5 жыл бұрын

Bought these items all in store. Measurements provided below are based on my 16' Volkswagen Jetta and where I wanted the tablet or phone to sit. for the back of the tablet i used a metal plate from a magnetic vent mount from 5 and below. Since making this video I bought another plate from Home Depot and I'm using that on the back of the tablet and it's much more stable
Top Bend 1" bottom bend in opposite direction 5/8" of an inch
Nail plate from Home Depot $1.40
www.homedepot.com/p/Simpson-S...
Peel and stick felt from Hobby Lobby $1.99 ( only used 1 sheet)
www.hobbylobby.com/Crafts-Hob..."-x-12"/p/20782
Neodymium magnets from Harbor freight $2.79 ( i used 8 )
www.harborfreight.com/10-piec...

Пікірлер: 82

@blackberry8924 4 жыл бұрын

Perfect, I just followed the steps, and I did it. Smart, simple and way better than manufactured mounts, created by idiots. You're brilliant, your idea equal money. But if our eastern friends founds it, they will copy it, get the credit for it, and sue you for copyright, pretending they did it first. You know the drill, Thanks & Bravo...

@JUSTINCR3DIBULL 4 жыл бұрын

Thank you!

@OnlyDubai Жыл бұрын

Cleaver. And it's much better than the ones sold in market. It stays close to the dashboard. Awesome idea 👍. Well done

@JUSTINCR3DIBULL Жыл бұрын

Thank you! Still going strong!

@DJ-qm2rh 4 жыл бұрын

Awesome idea! Super cheap & practical!

@livefreeordie1776xxx 4 жыл бұрын

Exactly the type of mount/project I was looking for. Thank you!!

@JUSTINCR3DIBULL 4 жыл бұрын

You're welcome! Thanks for watching!

@carlosv567 2 жыл бұрын

I just want to let you know that your guetto diy works flawless. It’s so perfect. I got the thicker metal plate and one like yours. I used the thicker to bend and the thinner between the case and iPad 7 gen for more contact and more secure. I did double on the wrap on top to have less movement . It’s awesome thanks for sharing.

@JUSTINCR3DIBULL 2 жыл бұрын

Glad it worked for you!! I used a better plate on the tablet as well just did the upgrade after the video. Use this all the time still works flawlessly! Thanks for watching!

@williamwoitexen8038 2 жыл бұрын

man the idea is so good, you should sell it, i was looking for all the tablet holders for cars, and yours is actually the best i've seen so far

@JUSTINCR3DIBULL 2 жыл бұрын

Really appreciate that! I did see it elsewhere when I made this. If I can figure out a way to mass produce something maybe I will 👍 thank you! Glad it worked for you

@MikkiLovesTerry 3 жыл бұрын

OMG you just saved me $700!!! I went to Home Depot and dollar tree for materials. 20 minutes and $7.16 later I had exactly what I needed for our road trip. It would have been under $7 but I got a smaller nail plate to tape to the back of iPad. Thanks

@JUSTINCR3DIBULL 3 жыл бұрын

You're welcome! I'm glad it worked out for you!

@johanberglund7071 3 жыл бұрын

I don't comment on videos often but I just have to say that I really like this. I was looking for a way to mount my tablet and still make it easy to take out and bring indoors and this was it. I made one after seeing your video and it works great in my Mercedes. It makes for a clean install and you can barely see the mount. Good job.

@JUSTINCR3DIBULL 3 жыл бұрын

Thank you! I really appreciate the positive feedback and I'm really glad it worked out for you!

@ItzClapzz 3 жыл бұрын

just use adhesive tape double side. I just put the tape on my stereo , stuck my iPad on there and pressed the taped area fot 15-20 seconds and it stood there not wiggling. I even tested is yesterday and it worked.

@JUSTINCR3DIBULL 3 жыл бұрын

That works too! So far this held up great!

@ItzClapzz 3 жыл бұрын

@@JUSTINCR3DIBULL yes but i dont wanna waste money so thats why i used what i have

@chrinamint 4 жыл бұрын

If only I had a CD player in my vehicle! I’ll have to see if I can wrangle it into the cassette slot! LOL!

@JUSTINCR3DIBULL 4 жыл бұрын

I'm sure u can! Good luck!

@Dogorpymp Жыл бұрын

Great work

@JUSTINCR3DIBULL Жыл бұрын

Thank you!

@vikram1576 2 жыл бұрын

Very creative

@JUSTINCR3DIBULL 2 жыл бұрын

Thank you!

@JosephAdcock. 2 жыл бұрын

I made a terrible version of this out of an old tin and a black sock and it WORKS LIKE A DREAM, my g

@JUSTINCR3DIBULL 2 жыл бұрын

Glad it worked on it for you!

@JosephAdcock. 2 жыл бұрын

@@JUSTINCR3DIBULL it's perfect honestly, I'll make a better version at some stage but you saved me 20/25 euro with this hack

@catgarcia2238 8 ай бұрын

i personally would use Velcro instead of magnets.

@JUSTINCR3DIBULL 8 ай бұрын

That would work well too. 4 years later this thing still holds up

@officialWWM 2 жыл бұрын

Genius!

@JUSTINCR3DIBULL 2 жыл бұрын

Thank you!

@Someguy055 Жыл бұрын

Legend!

@JUSTINCR3DIBULL Жыл бұрын

Thanks!!

@entertainmentWeekly19 3 жыл бұрын

Omg thank you soo much for this hack !! I just did it today now I’m heading to get a iPad for my car tomorrow I think a iPad mini will do just fine I have to admit though it kinda threw me off when I didn’t see my backup camera on my phone screen so I guess I’ll just have to do without my backup camera for now ??? Anyhow I’ll manage I’m sure lol 😝

@JUSTINCR3DIBULL 3 жыл бұрын

You're welcome! That is the one thing that does suck about it lol

@PandianMunusamy 6 ай бұрын

Good but for sure Neodymium magnet affects electronic parts..

@JUSTINCR3DIBULL 6 ай бұрын

Never had an issue! Still using this thing all these years later

@TheYellowDartt 4 жыл бұрын

Dude. This is so cool. A little more care into the build and it would be perfect.

@JUSTINCR3DIBULL 4 жыл бұрын

Thanks! I got the idea from another video on here. I used another plate on the back of the tablet and it's much more sturdy. Not sure how I could improve on it yet but it works!

@alfeovictor 3 жыл бұрын

@@JUSTINCR3DIBULL can you link the vid pls?

@JUSTINCR3DIBULL 3 жыл бұрын

@@alfeovictor the links to the parts are in the video description

@sun6v546 3 жыл бұрын

U R sooooooo fennnnnnnnnnnnnntasticcccccccccccccc , Mate ..... Love it Bro . .... :)

@JUSTINCR3DIBULL 3 жыл бұрын

Thank you!

@jomelochoa4646 3 жыл бұрын

Perfect idea I like it so much👍🏻I have one question the cd rom it make damage?

@413BROS 3 жыл бұрын

Nope! I've never had an issue. It doesn't go in deep enough to cause damage

@jomelochoa4646 3 жыл бұрын

@@413BROS thank you very much

@JUSTINCR3DIBULL 3 жыл бұрын

@@jomelochoa4646 you're welcome! I accidentally responded from my other channel lol

@TS3958 2 жыл бұрын

May wanna wrap the CD insert end with plastic or some rubber shrink.....the dust collected on my mount and the CD player got wrecked.

@JUSTINCR3DIBULL 2 жыл бұрын

That' sucks! I haven't had any issues with this but I only use it from time to time. Thanks for the tip!

@greggunninghamkite1079 3 жыл бұрын

This is awesome! How thick is the plate? The link to Home Depot doesn't work anymore.

@413BROS 3 жыл бұрын

Thank you!!! I checked it doesn't show up anymore for me either. It's a little thinner than a DVD if that helps. I can try to find a pic of it

@greggunninghamkite1079 3 жыл бұрын

@@413BROS I ended up getting the serial number from the image and found that it's 20-Gauge steel so 3/80"

@JUSTINCR3DIBULL 3 жыл бұрын

@@greggunninghamkite1079 oh good! Glad you got it 👍

@sergioorlando-j2p 16 күн бұрын

grazie mi hai dato un ottimo suggerimento perche i lettori cd che montano le goplf hanno una apertura di due millimetri e quindi i supporti min vendita hanno una lama superiore di altezza

@JUSTINCR3DIBULL 9 күн бұрын

@@sergioorlando-j2p thank you for watching! I appreciate the kind words

@Youtubeitisin Жыл бұрын

Do you recommend it after using it for a long time? Thanks.

@JUSTINCR3DIBULL Жыл бұрын

Yeah absolutely. I think the only thing I would maybe do is a better felt material on the outside but thats about it

@AhmadSyauqie 2 жыл бұрын

Nice idea bro! And cheap also :D Just one question, does those magnets affect the compass (or any magnetic components) inside the tablet? Thank you.

@413BROS 2 жыл бұрын

Thank you!! It has no effect whatsoever on the tablet or vehicle radio! Modern electronics are no longer effected by magnets 👍

@JUSTINCR3DIBULL 2 жыл бұрын

I replied from my other account lol

@raveporn 5 ай бұрын

Don't magnets mess up the screen?

@JUSTINCR3DIBULL 5 ай бұрын

New electronics are not effected by magnets. I've been using this thing for years without issues 👍

@mudassarali3759 Жыл бұрын

What a öut Vibration? And döesnt the ipad/phone falls down??

@JUSTINCR3DIBULL Жыл бұрын

I've been using this for years never had it fall 👍

@mudassarali3759 Жыл бұрын

@@JUSTINCR3DIBULL super? And doesnt it vibrate/move? It is really a clever hack

@JUSTINCR3DIBULL Жыл бұрын

Thanks! No issues at all

@AmyNyan00 4 жыл бұрын

Hi Sir , Does a magnet affect the ipad?

@JUSTINCR3DIBULL 4 жыл бұрын

No, modern electronics are not effected by magnets. Some cases have magnets built in so there's nothing to worry about 👍

@type_one 8 ай бұрын

dumb question - how'd u bend it/looks like it'll be stiff/difficult to bend lol

@JUSTINCR3DIBULL 8 ай бұрын

I legit used a hammer and bent it around a stair believe it or not 😂 I didn't have anywhere to bend it at the time I made this video. I actually still use this thing

@sald8705 6 ай бұрын

I used a vise for the two bends, but looking to add a lip to hold ipad better.