Man this things gunna be sikk, pretty sweet priming setup to 🔥🔥🔥

Finally!

Hmmm, ok, so you filled the 'engine' from the sandwich plate that feeds the cooler? Then you even said that most of the oil went in the cooler? Plus the oil was completely aerated because you used no bladder inside the vessel. Nice first try, but I think next time try using a vessel with a bladder in it, so it don't aerate the oil, & fill it up from one of the top oil passage plugs & also when first starting up a new build, the oil cooler does not need to be connected, as its only gonna idle for 20mins before changing the oil anyway.

Oh yeh....SIMPLE

i've seen a couple of smaller workshops use pvc for shop air delivery, guess it all come down to the glue and application

I thought this was going to be something so it’s never a dry start not just to prime the motor after it’s been built and installed ..so while cool no big deal ..I’d rather have a pre-Oiler on it for every start up

just a heads up, you can get -6 AN to 1/4" npt fittings, they are small and nice

Good work Buddy! 💦💦 can’t wait

Aircraft engines have oil primer pumps

Fuck yeah smashing it out man

Can’t wait to see it on the dyno!

bro u make this using a fire extinguisher much cheaper and works better

The content is heaps better than most vloggers. More technical and edgier than the usual bolt this, swap that content.

Could you use this setup to flush the oiling system in the engine? It would be nice to use some heavy cleaning solvents without running the engine.

To my amazement I just had the pleasure of seeing you car parked on the street. The metallic in the orange paint never came through on the vids. The car looks great. The black on metallic orange goes well. Cool wheels. Congratulations on a great build. Must be a heap of fun!

Dude...air will mix with oil. Need a bladder inside. USA Moroso makes an accumulator already built for less than $200. What ur doing will destroy your ricer

Not sure why you went through all that when you can buy a good quality engine pre oiler for $165 ???

Beaytuful engine build, now you going to put any money into that jacked up stock suspension? It looks dead ass warn out.

you didnt put the vid links at your fingers :(

An empty propane bottle might work too...