Here we build a dummy battery for the YN 460II so we can plug to the wall, or a power bank! #markcruzmedia #DIY
Пікірлер: 20
@rishabdam42283 жыл бұрын
I've tried and it works Just keep in mind use a thicker usb cable with 2 ampire power output (charger or power bank )
@xeo98.984 жыл бұрын
Super ! I'm definitely making one for my old vivitars !! Gracias !
@itang2452 Жыл бұрын
on godox TT600, this step just can firing 1/8 more than that flash shutdown.. nice share dude.
@CharmHuxley4 жыл бұрын
Thank you for sharing this ,,,two thumbs up
@dicebeatsofficial25254 жыл бұрын
Replace the power port with USB port that’s the best way I found out
@tonypmedia3 жыл бұрын
Nice video but you forgot to mention a couple things if you don't mind answering... 1. How many total full power(1/1) pops off that power bank? 2. Can the dummy battery source be used to extend to a larger source like a higher rated lithium or something too?
@paololevy4 жыл бұрын
Haha nice i need one of this for my shoots. Galing.👍👌
@markcruzmedia4 жыл бұрын
Thanks paps! Gawa ka na din hehe
@madzr30932 жыл бұрын
Pure ingenious
@gregostudio2 жыл бұрын
How do you find the negative and positive on the flash?
@MrAlloysius4 жыл бұрын
out of all the videos on youtube, this is the only one that comes close to what i'm looking for. Thank you so much. i don't have a 3d printing solution. Any suggestions on an alternate option maybe ?
@markcruzmedia4 жыл бұрын
As prototype, i rolled up some paper to the thickness of a 1.5v battery. Wrapped them up with tape, the wires are tucked inside the rolls. Just make sure you make contact points for the battery terminal. For that i used aluminum foil. Thanks for the interest man!
@gururaj61822 жыл бұрын
Two points power less only work well.. I want to use at full power.. i used powerbank... I think have to stepup one volt for fast recycle and full power.. will it work perfect...
3 жыл бұрын
Great work, i got a YN560 IV is posible in this flash?
@markcruzmedia3 жыл бұрын
Not with this method. I have a couple of yn560iv, i'll find a solution someday :)
@Andy_Leored2 жыл бұрын
Hi, thanks to share. But it didn't work with Triopo TR-982 II. Maybe I did wrong but I still can not findout the solution. I tried with phone charger and powerbank. Do you have any suggestions? Thanks🙏
Жыл бұрын
@@markcruzmedia Please do. :)
@familyofthompkins3543 жыл бұрын
He should have went over which is positive and negative and position
@gerardlike50153 жыл бұрын
Kaya rin po ba ito sa Voeloon V600?
@markcruzmedia3 жыл бұрын
mukhang hindi bro, may nagcomment sa baba hindi daw kaya pag may LCD na ung flash