DIY FIX FOR TWISTED FORKS .

Рет қаралды 10,831

Жыл бұрын

IF YOU HAVE BEEN EXPERIENCING A RIGHT OR LEFT SIDE PULL ON THE ROADS THE MOMENT YOU LET GO OF THE HANDLEBAR, THEN PLS WATCH THIS VIDEO.

Пікірлер: 58

@richardkolk7850 Жыл бұрын

I just bought my HImalayan only 90 miles in. Your channel is the reason I bought one. I was initially hesitant of all the maintenance required. Your channel convinced me that I can handle the work. Thanks

@ONTWOWHEELSBEN 2 ай бұрын

Glad to hear that . It’s a simple bike to maintain and that is its biggest advantage in this ELECTRONIC MARKET .

@brucebennett9154 Жыл бұрын

Great video Ben! The info is great and spot on, I have done the same thing several times. Just so you know I have also bent the front forks! Very costly fix but if all else fails it is something people might have to check. Thanks for your efforts and best wishes. Bruce.

@mohanmx682 Жыл бұрын

This is a really important video for everyone doing their own maintenance with forks / having frequents falls etc. I remember you performing this step when we were fixing the fork emulators, this is such a crucial step, which even mechanics can miss out. After you explain this one to me I use this method in my other motorcycles also to correct the "pulling to one side" issue and it has worked like a charm.... Thank you for posting this one and spreading the knowledge !

@user-hi2fl9iq5p Ай бұрын

Bro can i get ur number

@anuragshrivastava9987 Жыл бұрын

Thanks a lot Ben. I have been looking for this since past few months. Seen this yesterday & today got it fixed. Can’t thank you enough for content like this

@ONTWOWHEELSBEN Жыл бұрын

These comments are all the acknowledgment I seek for all this info and work that I put out . Thank you for the same brother

@azharc123 Жыл бұрын

Cool! Thanks so much. I'll do this trick this weekend.

@ritwikswikriti0422 Жыл бұрын

Thank You Ben. Thank you for my reply❤️

@prasanjit007 Жыл бұрын

Thank you very much for this valuable information

@mallikwassim007 3 ай бұрын

Good one, i used this technique on my MT09- few months ago, its works great. If there is a bend on the fork it makes no sense trying this out. Worth trying it at home before heading to the specialist. Informative..thanks

@Darsh.Mp3 Жыл бұрын

Thanks for the information will surely try this on mine💪🏽

@ronak_photos516 Жыл бұрын

thanks Ben, Enjoy the trails :)

@cca749 Жыл бұрын

Nice video once again!

@zamtea1115 Жыл бұрын

Thank you so much

@vigneshviswambharan6052 Жыл бұрын

Thanks for sharing this tip bro....and i like your vocabulary....how to talk in English like you

@fastwheels8541 10 ай бұрын

Amazing video, you really helped me with this issue.

@ONTWOWHEELSBEN 10 ай бұрын

Glad to hear that

@fastwheels8541 10 ай бұрын

@@ONTWOWHEELSBEN you have superior knowledge and great content.

@souravde970 12 күн бұрын

Hey there. I own honda shine bs6 motorcycle. Just 1 month ago i had a crash on tram lines @30kmph speed on right side. Right now when i am riding post 40km my right hand is aching. I have checked the handlebar gap-its fine, handle is not going left or right at 60kmph speed, what could be the problem?

@anirudhhhh Жыл бұрын

Hey man any thoughts on if Himalayan is still a worthy buy? or should I wait for the updated 450 Himalayan or get the 390 ADV since it has become 58k cheaper? I love a torquey motor but I would also like to not feel like a fish out of the water on the highways. Need cruising ability of atleast 110.

@aakashnair9577 Жыл бұрын

Nice glass

2 ай бұрын

Thanks

@srijanbiswas-4165 2 ай бұрын

My newly bought GT 650 has the same problem. So is this technique also applicable to GT ? Because i have done that same process but the problem is still there.

@jkkbm 5 ай бұрын

My brand new motorcycle has this issue. Got it delivered yesterday evening! :( hope its not an issue with the frame :(

@vickysree1528 5 ай бұрын

Hi brother … so I have this same issue in my new xpulse .. it dint fell anywhere .. but the bike is going very straight when am leaving the hand .. wat would be the problem u think ..???

@Artonicxmusic 2 ай бұрын

I'm facing this problem on my new scram 411 bike after purchasing it They said it's normal but is it? Please help me with it

@kushalBjnee Жыл бұрын

Thanks for the information, but does that windshield extender worth installing?

@enriquuu Жыл бұрын

It is if you're a taller than 5'9

@saswatsenapati7870 Жыл бұрын

Can anyone recommend a good garage who does fork repair in bangalore ??

@krabha9681 7 ай бұрын

Exactly what I’m facing rn

@rajeshmore4652 2 ай бұрын

Hello sir, Will this trick work on TVS ronin .as I am facing the same issue .. i changed T plate and tried but still not resolved.. Please confirm.

@ONTWOWHEELSBEN 2 ай бұрын

Yes it will ONLY if your forks are twisted

@sabithmohammed5901 Жыл бұрын

Which watch is you are using?

@ONTWOWHEELSBEN Жыл бұрын

garmin instinct

@uv4366 10 ай бұрын

I am facing the same problem now in my adv 390.. I took it to ktm show room and they told me that they wanted to remove the fork and check.. I could try it myself but I don't have torque wrench.. would it be a problem if the torque slightly varies.i have racquet wrench

@ONTWOWHEELSBEN 10 ай бұрын

Torque on triple clamps are not much of a deal as long as you don’t over tighten them . Hand tight + half a turn + 1/4 of a turn should do . Later take the bike to a seasoned mech and ask him to double check the tightness. Tightening and loosening of bolts comes from practice

@uv4366 10 ай бұрын

@@ONTWOWHEELSBEN okay.. thanks.. this gives me the confidence to give it a try by myself

@pranay4915 6 ай бұрын

@@uv4366Did you fix it?

@uv4366 6 ай бұрын

@@pranay4915Yes.. i definitely saw the difference.. it feels much better now.. if you don't have a straight stand, you would need help to lift the front wheel to decompress it. Only that way it worked for me.

@akshaimurali668 Ай бұрын

Hey Brother can I get ur what'sapp number it's urgent

@ridinghightidesindia6847 3 ай бұрын

Good effort but slightly inaccurate. Let caliper stay there on rotor, just loose it little bit, you can loose top yoke bolt too that holds tree stem in chassis neck, just don't touch upper pinch bolts, hold steering in center and give motorcycle CPR from top untill everything comes straight ( don't hold bar grips while pressing). Don't move motorcycle on main stand without tightening all, get help from a friend to tight all bolts. More over this method is applicable for only those motorcycles who have top yoke bolt on top not in side else whole front end will slip from neck. Cheers 🍻

@therealmaxtorque Жыл бұрын

When im riding, i feel a strange pull on the right side. Though my bike didn't crash

@ONTWOWHEELSBEN Жыл бұрын

Yes . This is the solution

@vinothkumar151 Жыл бұрын

One of the worst motorcycles.. I have bought and sold in 5 months because ... I always be in the service center instead in home😂😂😂😂.. please like who had suffered..why we should do these kind of maintenance and ensure all who are buying vehicle should be a professional mechanic😢Don't buy... 👎 may be this vehicle withstand because of older Himalayan... When you buy a new version will come to know the problems and regret.

@krabha9681 7 ай бұрын

Which bike did you get next? Feels like selling my Himalayan as well.

@debabratamukherjee8810 Жыл бұрын

Funny how Adam Riemann posted this tip on his channel just yesterday (ARiemann1: How to maintain your motorcycle) and you post it today! If you cannot be original, that's okay - but stop pretending that you've been doing this for eons. Cheers!

@enriquuu Жыл бұрын

Adam didn't remove his caliper when he did it.

@thetouringtype Жыл бұрын

Brother if this is your day job i understand. But there are so many more trash videos that you could diss on youtube. Pls spend your time and efforts there. If you are sincerely worried on plagiarism pls drop a dm to him rather than trying to pose as a know it all here.

@debabratamukherjee8810 Жыл бұрын

@@thetouringtype I prefer to call a spade a spade when I see one. Giving credit where it is due could go a long way, alright perhaps giving credit isn't necessary in your and your friend's books but lets do away with pretence. Oh and I have a well paid job thank you very much, you should go find one yourself instead of sitting around expecting your nepotistic nature to pay the bills.

@thetouringtype Жыл бұрын

@@debabratamukherjee8810 Oh so still on comments. Great now i know for a fact that this is your day job. Have a great day pal ... cheers

@debabratamukherjee8810 Жыл бұрын

@@thetouringtype Hahahaha, you said it, yourself pal.

@roshan00ninja57 3 ай бұрын

thank you

@ONTWOWHEELSBEN 3 ай бұрын

You're welcome

@incorrigible117 Жыл бұрын

this video looks like a exact copy from @ARiemann1

@syedenhammydude6196 11 ай бұрын

possibly because my himmy has been doing this since before Adam did his video... and the solution is also fairly well known. Neither of them invented this solution. Ben's just demonstrating it specifically for the REH ...