DIY FJ Cruiser Trunk Storage Solution

Рет қаралды 18,103

4 жыл бұрын

There are tons of DIY shelf mods and rear storage solutions for the FJ Cruiser. Here's a look at mine, inspired by an FJ Cruiser Forum thread, but with a slight modification.
Original FJ Cruiser Thread: bit.ly/2HtscaJ
Bins: bit.ly/38ujmW5
Buy me a coffee / support my channel
www.paypal.com/paypalme/LiL13...
Disclaimer:
I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Due to factors beyond my control, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not LiL13izzy7.

Пікірлер: 36

@cbeserra 2 жыл бұрын

Subscribed!! Great video.

@LiL13izzy7 2 жыл бұрын

Thanks!

@steveg219 2 жыл бұрын

Nice build!

@LiL13izzy7 2 жыл бұрын

Thanks!

@epelsus1408 2 жыл бұрын

Nice and do-able, thumbs up.

@LiL13izzy7 2 жыл бұрын

Thanks!

@portcityengineering 2 жыл бұрын

Hey bud, love your build! Can you share exact dimensions?

@fuzzion78 3 жыл бұрын

Looks good and very practical. Noticed the screws of the piano hinge going in the plywood the way they are. Would be scared to use that technique as plywood has no strength when putting screws in that way. Just wondering if they(screws) held up? Thank you for your time Mr.

@LiL13izzy7 3 жыл бұрын

I've had this for about a year, and yes, the screws have held up. I haven't removed the platform, aside from filming for this video, so that's one other reason why they are holding up, but it feels pretty secure to me.

@KMF3 3 жыл бұрын

I have been looking for something similar to this to do with my FJ. And like you I want something that is not permanent. But the price of those bins is ridiculous so I'll look for another idea for the drawers

@LiL13izzy7 3 жыл бұрын

Let me know if you find anything that would work. These bins happen to be just the right size. Of course you can always make your own too.

@KMF3 3 жыл бұрын

@@LiL13izzy7 I'll try to remember. But I love how simple the idea is.

@teatonaz 3 жыл бұрын

Easy enough to make pine boxes with butt joints and right angle brackets on the inside. Could then do the carpet around the outside of each box to not scratch the wheel wells. I think the wood will slide easy enough on that carpet you/he has in the back. FJ emblem on the carpet tells me it’s OEM?, (mine came with the rubber insert in back, but would like the carpet better myself, as you said stuff doesn’t slide around so easily. Wish I had a better look at that support beam you had as the center support. I see it has a “foot” on the bottom and carpet there as well as going upward, but question,... does the top have of the support beam have carpet also where it contacts the underside of the cross piece that becomes the new floor ? (Great idea on the 3 gal.water bottles,.. they take up so much real estate in back when camping, that’s perrrrfect). Oh and other ?,... do you have a vid on the cargo nets you used on the back door. Seems that have some trim piece on the bottom and sides of each one, so stuff doesn’t pop out there. ? P.S.,... just realized, if I buy the bins,.. they can fit inside each other when out of the vehicle, as I have very limited garage/storage space, that that alone would probably make it worth it for me. And with the support shelf folding in half,... perfecto !! Still would like to know about the top of the support beam and also where’d you get the piano hinge? ( I know they are expensive but would be worth it. :-)

@LiL13izzy7 3 жыл бұрын

-You can find piano hinges at home depot for relatively cheap. Just something to note, once I covered the platform with carpet, it doesn't fold completely closed, like it would without a carpet covering. -The cargo nets are an OEM part (number PT912-35070) that you can buy online, or from a Toyota dealer. There is plastic trim on bottom to keep the bottom of the net closed. -The bins do stack easily within each other for easy storage if desired. -The top of the support beam has a right-angle bracket on either side of the vertical wood piece running along the edge of the top. This piece supports the piano hinge so the platform doesn't fold into itself with a load on top.

@Backwardspajamas44 Жыл бұрын

What is the support made from?

@fjnomad 2 жыл бұрын

Nice and simple

@TheD7aim Жыл бұрын

Have u tried the plastic bins in Homedepot? I have a couple laying around, the have them in many sizes

@LiL13izzy7 Жыл бұрын

No, I haven't seen any bins at home Depot this exact size.

@TheD7aim Жыл бұрын

@@LiL13izzy7 I have 2 (black bins with yellow tops) , they’re very sturdy and they come in different sizes .. Just baught one for less than $20 .. Give it a shot and let me know

@LiL13izzy7 Жыл бұрын

@@TheD7aim I've seen those, but they are a little too high and narrow. I'm good with the bins I have!

@TheKiller7276 Жыл бұрын

@@LiL13izzy7 I think I am going to try the $12 home depot bins and just use a Dremel to take the extra height off. those bins you use now are $100 online. Crazy!

@wayfaringoverlander 9 ай бұрын

😂😂😂 💯

@wayfaringoverlander 9 ай бұрын

There are other options for drawers out there much more affordable. But thanks for the build

@LiL13izzy7 9 ай бұрын

You are right, but I have not seen any drawers (the ones you buy at big box stores) that are the exact length, width, and height

@f1346m 8 ай бұрын

The plywood platform its a great space saving solution. However, the price on those bins is too expensive in my view. Im pretty there's cheaper options for bins out there.

@LiL13izzy7 8 ай бұрын

Yes, you can get cheaper bins for sure, but I haven't seen anything readily available with the right dimensions. Steep, but not as expensive as a permanent drawer system like the Tuffy for almost 1k.

@KMF3 3 жыл бұрын

Why did you want carpet? I think I would rubberize it

@LiL13izzy7 3 жыл бұрын

The carpet covers the wood and also prevents things from jostling around in the trunk. It was cheap and simple enough. If I didn't have the carpet I probably would have put the OEM rubber trunk mat on top.

@samoain1779 Ай бұрын

2024. Those bins now $105 each. Smh. Id be down for $50 each

@SethAllanAmes 4 жыл бұрын

I just saw that post too. Shipping was ridiculous.

@LiL13izzy7 4 жыл бұрын

Yeah, what can you do unless you live locally?

@SethAllanAmes 4 жыл бұрын

@@LiL13izzy7 I was just thinking to cut down some plastic tubs that are a little higher.

@LiL13izzy7 4 жыл бұрын

@@SethAllanAmes if you find some with the right width, let me know. Of course there is the option to make your own out of plywood too, but those fiberglass tubs are literally just the perfect size.

@KMF3 3 жыл бұрын

Yeah I think I would look for other options for the drawers.

@mandersen 3 жыл бұрын

I emailed the company asking about other shipping options and was quoted "only" 89 dollars shipped instead of the $130 the website showed....total for two boxes in 2021....still $254