DIY Garage Storage Shelves
Рет қаралды 433,520
8 жыл бұрынDIY garage storage shelves that are low profile, off the floor and open faced. I don't want my shelves to go from floor to ceiling.
I still want to be able to place floor objects against the wall in this part of my garage. I also want these shelves to be 8 feet
long and open faced. Open faced meaning nothing secured vertically to the front of the shelves that would infringe on the eight
foot shelf length. Load bearing weight capacity was also factored into the design of these shelves as well.
If you would like more information including a cut list and materials for this project visit:
www.simplyeasydiy.com/2016/01/...
Rabbit Hutch Design #1
• DIY Rabbit Hutch / Cage
DIY Shed Shelves
• DIY Shed Shelves
Also visit my facebook page:
/ stansullivan14
Visit me on Pinterest:
/ stansullivan14
----Music by----
Pop Metal by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Artist: audionautix.com/
@fresh2k2004 4 жыл бұрын
Thanks for the idea on the shelves. I just built 5 of these on one wall in my garage while I'm in isolation. I liked building my brackets this way as it is very sturdy. I already had spare 2x4s so I didn't have to buy anything but a sheet of plywood some more wood screws. Also I like that no supports touch the ground so I easy sweep up the floor without anything in the way. Thank you again for sharing this build!
@TranTheClever 4 жыл бұрын
OSB is amazing, I made an outdoor step(just piece of osb screwed to 2x6 box frame) leading into my shed. It isn't sheltered from the weather in any way...snow, sleet, rain, ice and/or blazing sun. That was 14yrs ago! Its still going strong. Great shelf build, thanks for sharing! 4:38
@TranTheClever 4 жыл бұрын
This was the BEST video I've found on youtube for floating shelves! The way you speak, the way you explain, makes me feel very confident I can do this! thank you so much! I liked and subscribed! 4:36
@simplyeasydiy 4 жыл бұрын
Thank you for the kind words.
@DiYDadDojo 5 жыл бұрын
My favorite video on Lumber rack i’ve seen so far. Thanks for the Video
@TranTheClever 4 жыл бұрын
That saw attached to a shop vac...GENIUS! I've been away from woodworking too long. Great vid. Tnx 1:29
@lancewelling8502 6 жыл бұрын
Thanks for the great video Stan. I used your approach to put shelving in my garage.
@dufreebell 4 жыл бұрын
Simply simple, yet super cool. Nice work there.
@TranTheClever 4 жыл бұрын
OMFG - use the speed square as a guide... that just blew my mind! So simple and obvious yet this is the first time I've ever considered doing that. I now feel stupid for years of avoiding my circular saw due to my exceptional ability to not cut a straight line. I know it was just an off-hand thought for you, but thanks anyway you just changed my shop life. 1:27
@TranTheClever 4 жыл бұрын
Excellent video as usual. Glad to see you included your little "helpers" in the project. They will learn some responsibility and pride in helping out. 2:42
@TranTheClever 4 жыл бұрын
wow, so helpful and clear -- and what a professional looking shelf! Thanks for your generosity! 2:38
@robmazzitelli 8 жыл бұрын
Always enjoy your videos, Stan. Thanks.
@simplyeasydiy 8 жыл бұрын
+Robert Mazzitelli Thanks, glad to hear it.
@TheeDavidT 6 жыл бұрын
Stan, I would like to make some shelves like this but 24” deep. I assume I just make adjustments to the lengths. Do you think that will hold 100-200lbs/linear ft. It will span 8’/11’/12’?
@hogue3666 6 жыл бұрын
I noticed you put your brackets in the corner of your garage. Can you move these out and leave a little extra space into the corner if you're not loading the shelves too heavy?
@djbanger 5 жыл бұрын
Thanks for this vid, just what I was looking for with plans!
@24AnVRodri 7 жыл бұрын
from the ceiling to the bottom of the 3rd shelf, what is the height? I'm about to start a unit just like yours but would like gap distance between all 3 and full length
@markvanness 2 жыл бұрын
Hi, Nice video. Could you tell me the weight limit program called that you mentioned?
@hogue3666 6 жыл бұрын
Awesome stuff! I'm really new to woodworking. I'm going to make shelves like these in my garage for my power tools. I'm wondering why @0:37 you say that gravity is going to be your friend on this one. It looks like the two pieces that make your L are right about the same size. What am I missing?
@businessreviews9002 6 жыл бұрын
Nice shelves Stan, can you name some of the tools you used in this project, the drill and the circular saw to cut the plywood in particular.
@havenisse2009 8 жыл бұрын
shorts and T-shirt middle of January.. not bad at all. I made similar for my shop using just pallet wood and scaps, inspired by IKEA Ekby Valter brackets.
@simplyeasydiy 8 жыл бұрын
+havenisse2009 Nice.
@Mark-oj7yt 6 жыл бұрын
What were your spacing measurements of the brackets going up and down and left to right ?
@nitrotmann 6 жыл бұрын
Stan- I have bare studs in my old hickory shed. I love your design for the brackets. Could you please send me a cut list for 1qty 8'L x2' d shelf and brackets? Thanks
@MrPhillipHBrown 6 жыл бұрын
Well done!!
@lydvincecruz824 3 жыл бұрын
Great job. Like it so much.I might give it a try. Thanks for sharing.❤
@simplyeasydiy 3 жыл бұрын
Thank you! 😊
@luisfigueroa7851 6 жыл бұрын
would your design hold up around 400 lbs? how could it be modified to do so if not?
@mikecarp3383 7 жыл бұрын
very neat and tidy looking mate
@mellokevt1669 7 жыл бұрын
Hi Stan, you mentioned a program to help you calculate load. Is it a commercial product or something you came up with?
@ecarrillo71 7 жыл бұрын
Mello Kevt did you receive a response on this as I'm wondering the same as well.
@radiomantodd 6 жыл бұрын
a year later... but I think he used this: www.woodbin.com/calcs/sagulator/
@davidseaton7339 3 жыл бұрын
Hello, is that a masonry wall or a stud wall?
@TranTheClever 4 жыл бұрын
i love ur shirt, it looks so cozy! 2:53
@TranTheClever 4 жыл бұрын
Anybody else wish they had a handy man like him👏🏽👏🏽👏🏽✅ 5:31
@BIGBUDDY291 8 жыл бұрын
I like those shelf's going to make me some. Thanks Stan. GO BRONCOS!!!!!
@simplyeasydiy 8 жыл бұрын
+Buddy Bouchez Ohh boy. Whats a Chiefs fan to do? I'll give a go Manning but thats all you're gettin.
@BIGBUDDY291 8 жыл бұрын
lol
@nostradamus4828 Жыл бұрын
I like your design 👍
@simplyeasydiy Жыл бұрын
Thank you! Cheers!
@TranTheClever 4 жыл бұрын
Definitely looks easier than other floating shelves I've seen. Thanks!! 1:17
@boondocker7964 4 жыл бұрын
Great vid, you "cut" to the chase without a lot of chatter, very useful.
@TranTheClever 4 жыл бұрын
Amazing idea!!! 1:18
@TheCladi8or 6 жыл бұрын
How thick pywood for shelf?
@TranTheClever 4 жыл бұрын
Definitely a handy storage project. 3:19
@Shonenshark Жыл бұрын
I gotta make this these shelves u said can hold up to 300lbs each?
@TranTheClever 4 жыл бұрын
Is this a imperial ton or a metric ton you're talking about? 5:36
@jphelps408 8 жыл бұрын
is there a reason why you didn't make the shelves deeper, like up to the garage door? keep making the great vids!
@simplyeasydiy 8 жыл бұрын
+James Phelps (jphelps) Various reasons really. Personally I don't like deep shelves. Things get too easily lost behind other things. So I take measurements of the most common items I'm going to store and build accordingly. Also that top shelf is already limited on what I can easily stick up their due to the Garage door rail. Personal choice basically.
@BestAccessDoors 6 жыл бұрын
Excellent craftsmanship! Will you be doing more videos like this soon?
@calebburnett 8 жыл бұрын
Your nail gun magically changed colors. ;)
@simplyeasydiy 8 жыл бұрын
+Caleb Burnett Hahaha! You're right, I didn't even notice that in editing. I had to go back and re watch the video to find out what you were talking about. I'm not even sure why I changed guns.
@christyray6493 3 жыл бұрын
I NEED TO KNOW HOW U MADE THE BRACKETS PLEASE!!!
@Banko751 8 жыл бұрын
not bad my friend!
@MM-sq5pf 3 жыл бұрын
How much did it cost and how much time total?
@TranTheClever 4 жыл бұрын
Man, this is a great idea. Thank you 3:11
@TranTheClever 4 жыл бұрын
I really want to get a good job to buy a house and try all these 😭💓💓 (you inspire me a lot =) ) 5:27
@loganrieman851 8 жыл бұрын
what angles did u cut those boards at 45°?
@bo12white34 5 жыл бұрын
Nice
@HassanNabeel-bg5xy Жыл бұрын
What was the angle you used?
@Manu24985 2 жыл бұрын
Fantastic 👍🏻👌🏻
@simplyeasydiy 2 жыл бұрын
Thank you! Cheers!
@TranTheClever 4 жыл бұрын
This looks amazing!!! ❤️❤️❤️ 5:55
@ROGU3STUD1OS Жыл бұрын
Love it, please may i know the exact measurement of your angle braces! Thanks!
@simplyeasydiy Жыл бұрын
45
@larrywhite444 7 жыл бұрын
Howdy: Where is your link to the reference to cutting your support brackets. This is the closest thing to what I want to do (I think my idea will work with this. Thanks, good job. L.
@simplyeasydiy 7 жыл бұрын
Is it not in the description? Let me know if it isn't.
@simplyeasydiy 7 жыл бұрын
Oh I remember. The link appears on screen. The little exclamation point that pops up in the top corner when I'm talking about cutting boards to length with angles. Some where around the 20 second mark.
@jaijason8150 6 жыл бұрын
Why 10" top piece of base but 12" osb
@Netherlands031 4 жыл бұрын
Cool project but I would have used metal shelf supports, brackets with a diagonal brace take up a lot of space where you can't put long wooden planks.
@almas7123 4 жыл бұрын
At 3:30 what’s the purpose of the piece you added in the front? Not sure it’s supporting anything, is it for looks? I recently completed something like this but may need that 2x2 you added on the back. Again, wanted to know function of the front piece.
@simplyeasydiy 4 жыл бұрын
Additional support to prevent sagging
@almas7123 4 жыл бұрын
Stan Sullivan thank you sir!
@hiPeeks 3 жыл бұрын
@Stan Sullivan Do you mind explaining how it prevents sagging? I was looking to do something similar, I do basic woodworking projects - but not many "structural" things. Why would that front piece provide extra support if its not anchored to any additional support? Also do you mind sharing that software you were talking about?
@TranTheClever 4 жыл бұрын
What did you do to prevent it from moving/swinging 3:15
@MiguelLopez-ky8fs Жыл бұрын
Those impact drivers are load , really ready laod
@herbiesnerd 5 жыл бұрын
Bunkers and a cut list? There’s an RS2 guy!
@Abeguzman 7 жыл бұрын
The drill must be very loud! 😂
@simplyeasydiy 7 жыл бұрын
Haha. The sound of an impact driver echoing off concrete walls can be very loud yes. Plus one should always adhere to safety precautions that one deems necessary in any situation they are in. Even if those safety precautions seem trivial to others.
@itsnotlevel2 7 жыл бұрын
I was just about to comment.....Not to be snarky but to be teasing like....really bro...lol
@mikonT1 6 жыл бұрын
I'm at a time when Abraham Guzman
@bethfuciu3099 5 жыл бұрын
@@simplyeasydiy Wait till hes old and cant hear :}
@Manu24985 2 жыл бұрын
Glue name please!!!
@simplyeasydiy 2 жыл бұрын
titebond 2
@Manu24985 2 жыл бұрын
@@simplyeasydiy thanks Sir
@bashakram7458 8 жыл бұрын
Hazmat Yousaf a s
@CTSully1 6 жыл бұрын
Nice earmuffs!! Pussification of America rolls on
DIY Homestead Projects
Рет қаралды 4,7 М.
Phill Wyatt Projects
Рет қаралды 45 М.
Paul's Garage
Рет қаралды 37 М.
Gabriella Triple Charm
Рет қаралды 46 МЛН