DIY Gun Paint Job Tutorial

Рет қаралды 214,441

Күн бұрын

A quick and easy to follow guide on creating your own custom paint job on your airsoft guns.
This tutorial shows you how you can create a paint job of your choice with supplies found at your local hardware store.

Пікірлер: 199

@hunanbeing9164 3 жыл бұрын

I've seen dozens of these videos and this is by far the best one and easiest direction.

@HvacGuy76 Жыл бұрын

Agreed and the workmanship is amazing.

@millerleathergoods7623 Жыл бұрын

I agree

@lukuscarter3563 4 жыл бұрын

I can honestly say. I use to paint automobiles prior to my injury. It looks so much easier to prep and paint a gun. Very nice job sir. I’m sure that took a lot of patience. Very nice indeed. Thank you for sharing.

@darylobey8867 2 жыл бұрын

Iv airbrushed car hoods and i know your pain in prepping lol working on guns is much more simple :)

@SEAKPhotog 4 жыл бұрын

Well done! Using electrical tape as a stencil is a great tip. I've got an AR I'm thinking about painting and you've given me some ideas. Thank you!

@RealDaddyG 2 жыл бұрын

Beautiful! As a paintballer who plays Magfed, I tried doing a multicam arid type paint job on my TMC, however it didn't work out too well. So I thought about doing this, but with a base layer of FDE, putting tiger stripe stencils on it, and then going a dust of brown about it (I don't own an airgun unfortunately).

@FreedomStencils 5 жыл бұрын

Great work! Love the color choices and layering.

@johnmcquiston2248 3 жыл бұрын

I really appreciate the way you showed how to get some eye popping looks! Great job!

@Bill-wr9om 2 жыл бұрын

I have been looking at hundreds of paint your guns videos as I am considering painting one of mine, and I have to say that I like yours the best, TYVM, I just need to get an airbrush as that "effect" is awesome. Can't wait to try it. TYVM!

@kg4zyz 2 жыл бұрын

Best looking paint-job I’ve seen on KZfaq! Nice work bro!

@JAKON72 6 жыл бұрын

Awesome job, it looks great!

@thesickening0169 2 жыл бұрын

This looks absolutely phenomenal

@bleachsmoker 2 жыл бұрын

Looks great! Can't wait to try this.

@thepiratepenguin4465 9 ай бұрын

I did something similar with Vallejo paints since they are intended for military models. I got a nice Splitter pattern, which was a close match to the jacket I normally wear when I'm out in the bush.

@beargillium2369 3 жыл бұрын

Cool technique, thanks for sharing!

@scottydavis1813 Жыл бұрын

I have been debating doing this to my Scar 17 that is all black. This is the first video I have watched that has pushed me to just do it.

@CyclingAddiction 2 жыл бұрын

I'll probably stick with a primarily green multicam, but this is the most unique and nice end result.

@joeshmo8155 2 жыл бұрын

You killed this paint job man.

@contra1981 Жыл бұрын

This came out so good! Thanks for the tutorial!

@donvreeling1642 5 жыл бұрын

awesome, this really helps me out ! thank you

@raxxtango 2 жыл бұрын

the black on tan looks pretty good

@dominikmaslanek4708 6 жыл бұрын

nice paint job plus feed why good camera angles too i feel lile you deserve more subs

@Wootangtw 3 жыл бұрын

You did a awesome job on that rifle... that airbrush did the trick

@SuperHeatherrussell Жыл бұрын

I'm showing this to my wife and she's gonna help me out with this!! Nice video

@Senthynel Жыл бұрын

Reptile camo looking great

@CalebTuckerAirsoft 4 жыл бұрын

This was amazing thank you

@imcool-rh1xg 3 жыл бұрын

It looks like the reptile camo from call of duty modern warfare (i like those camos)

@codealtf4logn779 3 жыл бұрын

Yeah it does haha

@SnipeLoisirsTestsCustoms Жыл бұрын

Beautiful , very very good work 😉👍✊

@BarukHabaBShemYahuah 2 жыл бұрын

It looks really good

@billyblake4291 3 жыл бұрын

Great work and video!

@ParkerZviper 2 жыл бұрын

you have done a perfect paint job so i liked the video, i will sub!

@gaetanoincandela8454 Жыл бұрын

You did a awesome job

@dalanwanbdiska6542 4 жыл бұрын

Going to do this color scheme in green in the summer on my 303 british. Im doing winter camo right now

@donvreeling1642 5 жыл бұрын

i could use some tips about, how to make like a green gun, with the best camouflage, there still some hard lines on this gun, wich i like. But i like someting to blend in some bushes. like , any bushes

@Si-Toecutter 2 жыл бұрын

Doing it but with low tac masking tape from Amazon, you can rip the edges to get a better edge

@mbenjamin292 5 жыл бұрын

Please make some more vids wow this is great new sub here thanks.

@kalanipitmon7817 Жыл бұрын

Easiest tiger stripe diy ive seen nice vid

@helenetena8749 4 жыл бұрын

good job !!! very nice gun !!!!

@terryderush2657 Жыл бұрын

This is a very nice 👌 👍 job. Looks damn great 👍.

@ratagris21 3 жыл бұрын

Looks great.

@mossranchoutdoors7249 2 жыл бұрын

Very impressive 👏👏

@Red_84 4 жыл бұрын

awesome job !

@b-kerbchek-k7582 4 жыл бұрын

Automotive clear enamel is the best I’ve used ..... 1-2 coats max no fade-away

@calebsshorts3595 4 жыл бұрын

Then it shines

@b-kerbchek-k7582 4 жыл бұрын

Caleb Lynthacum you can get no gloss finish, and I’ve noticed if you do a final coat of regular Matte finish it completely dulls the shine

@Petryfied 3 жыл бұрын

Yes any automotive/truck bed paint or grill paint are all rated for higher heats and are tough as nails. I use the black truck bed liner spray paint on old rifle barrels that’s won’t let you use super blue

@alanbelmont627 5 жыл бұрын

Great Pattern!!!

@pitman2911 5 жыл бұрын

Great video top job

@Mn_Prepper53 Жыл бұрын

Job well done

@tom_olofsson 2 жыл бұрын

Very cool effect.

@adrianespinoza7534 2 жыл бұрын

Came out bad ass!!!!

@ParsonFamOutreach 2 жыл бұрын

BEAUTIFUL

@stripervince1 5 жыл бұрын

Very nice. I think they call this pattern "riptile"

@PepsyTV Жыл бұрын

i just want to say that it looks awesome, just from the first photo of the video. One observation, you kinda hold the spray to close to the gun in my opinion and that make the paind bleed and it can be seen in the result, but damn still looks good

@davidtannenbaum1825 3 жыл бұрын

Well done

@THY425 5 жыл бұрын

Wow ! It's beautiful. What are the RAL codes of the paints you use? My guess its Ral codes 1013, 1014

@RAH_BLISS 2 жыл бұрын

Outstanding Job and should go into business if you already haven't.

@LatestHour 4 жыл бұрын

That looks so good, I don't have an airbrush and am thinking about spray painting on the tape to let the over spray create the same effect. Have you ever tried this?

@elmatador2481 4 жыл бұрын

did you try that technique ?

@user-hy6ux1ww8t 7 ай бұрын

I know this is an older video but man I sure love it! I’m going to give it a try on a couple matching ar’s I like your color choices can you tell me the names of the colors please. ? Thanks!

@erla6547 6 жыл бұрын

Nice video but which colors did you use exactly?

@lantzfamilyadventures5845 5 жыл бұрын

What kind of paint did you use in your airbrush? How is it been holding up?

@donaldvelasquez451 3 жыл бұрын

How many colors did you use?great job

@chrishanlin1423 4 жыл бұрын

Nice job, absolutely stealing the idea of using Electrical-Tape Vs. Painters-Tape. Did you sand or wash the blaster first to remove leftover anti-moulding agent?

@tipxsy_5921 2 жыл бұрын

Do I need to take out any screws, or cover up anything on the gun with masking tape, so it doesn’t ruin it?

@jimjensen1096 3 жыл бұрын

Which airbrush are you using in this video? I'm shopping them now, not sure how much I should spend.

@justindixon9762 2 жыл бұрын

Do you have to take the rifle apart or cover anything before you spray it ?

@Thuggle_Bus Жыл бұрын

Try holding the can back farther next time. Much more even and efficient coverage

@jayjuggrnaut 3 жыл бұрын

Fucking. Sick. Nice watch/band as well. By your style choices you are obviously a gentleman.

@albertoezau24 4 ай бұрын

I have an 80% aluminum receiver. Do you think the paint adheres well to the aluminum?

@wafflyfox7550 Жыл бұрын

Do you have ukara? Because I don’t I’m not 18 yet so I think I’ll make use of two tone blue and paint it like a union jack

@abelgaborszivos5964 4 жыл бұрын

This is awesome! I tried it my ak 47

@trapboyjack5179 4 жыл бұрын

How did it hold up to the heat?

@rodbookout158 Жыл бұрын

what color paint do you use...i know your first coat is base coat... what color paint is you base coat and what color are the rest?

@silvinopararuan2299 2 ай бұрын

Use painter’s tape instead of electrical tape, cut it with scissors. Less sticky, and easier to peel off

@Eric-kf9jf 2 жыл бұрын

didnt mask off the mad well or dust cover...light lens?

@derinpadir1740 3 жыл бұрын

Did you take out the anything but the mag?

@fullautoglock18able 2 жыл бұрын

What brand and colors did you use besides the black ?

@Cody357 Жыл бұрын

Do gun metals require a coat of primer?

@GuacIsExtra99 Жыл бұрын

What paint did you use for the dark coyote brown type color?

@scottleppard288 3 жыл бұрын

How was the plastic prepped ? Sand paper?

@nicolai3899 Ай бұрын

Can you make the same gun but with black stripes on a green background?

@cheifDeisel 2 жыл бұрын

What paint did you use with the airbrush?

@ResurrectDecoys 2 жыл бұрын

For those without an airbrush, I wonder how effective the sponge method would be for the shadowing

@darylobey8867 2 жыл бұрын

It has a cool efect :) or with a rag gently rub the edges or even a smol paint brush wil also work

@LittleRusha Жыл бұрын

Do what grafiti artists do and put the core of an empty Bic pen on the end of your spray paint can

@bigmacboney 2 ай бұрын

Does the electric tape leave a sticky feel?

@checkthewater39 3 жыл бұрын

Sick!!

@owentoms3130 2 жыл бұрын

This gun looks amazing I've already started mine what tape did u use thanks

@joeshmo8155 2 жыл бұрын

Electrical tape

@callsign.iceman7913 Жыл бұрын

What brand and shade was the base color?

@danieloshea9939 2 жыл бұрын

This is really handy to know, just curious if you'd have to sand it first or what

@darylobey8867 2 жыл бұрын

Nope do not sand or prime NOTHING just mask off and paint

@Mr.Studer 4 жыл бұрын

Looks great, now if I only had an air brush 😢 One thing I would suggest is to plug your barrel/cover your crown. When I painted my .22LR it took about 30 shots for it to hit accurately again until the paint was all worn off around the crown.

@RiskofRusty 3 жыл бұрын

I’d suggest removing the inner barrel and plugging the outer barrel with toilet paper - same deal with the magwell, the space between the trigger/receiver, and the motor plate if applicable.

@adamnkonklus1179 2 жыл бұрын

What colors did you use?

@jessebrown4755 3 жыл бұрын

Did you sand anything?

@keithwhitman8190 3 жыл бұрын

Does the electrical tape work better then painters tape? Curious cause i had a few spots with the under layer paint lifting while peeling the tape.

@RadioSilence 3 жыл бұрын

Yes, electric tape keeps its shape and is easier to cut than painters tape in my opinion. If you find painters tape works better for you though then go for it! 🙂

@AdoreYouInAshXI 2 жыл бұрын

What paint did you use?!

@dwebb68 6 ай бұрын

What laser system is that?

@ChildishMiguelito 5 жыл бұрын

Is disassembly of the gun required or any degreaser or sanding necessary?

@RadioSilence 5 жыл бұрын

Miguelito Not necessarily. While disassembling the weapon will definitely prevent any paint getting in to the moving parts, it’s equally as easy to just plug the holes or mask areas off. No sanding or anything required. Paint isn’t technically permanent and with a simple paint job like this it’s important to remember it will most definitely show signs of wear quite easily

@LynxenTheRogue 5 жыл бұрын

Subbed, absolutely helpful! Now, should I take my gun apart? i'm scared that the paint will get in places where it not belongs

@RadioSilence 5 жыл бұрын

I didn't take mine apart! Just make sure to thoroughly plug every hole or gap where paint could get in and you're all good 🙂

@crewgadjy 4 жыл бұрын

RadioSilence just use of instead of the darker brown and a lighter green instead of the tan. That will give you a green tiger stripe. Practice on a old springer or something if in doubt.

@vulturelarson164 3 жыл бұрын

Take the bcg and charging handle out then cover any laser, light or optics no paint got in-between the upper and lower for me

@thequanhitsback9088 5 жыл бұрын

Hi, I’m thinking about painting my ak47. The problem is it’s a complicated paint job and it’s my first time. I’m not sure if you have heard of the game rainbow six siege but i want to paint my gun the black ice camo from that gun. Any tips on how to make it look nice and similar to the game?

@andresocampo5752 5 жыл бұрын

The Quan hits Back you can’t Chief

@RadioSilence 5 жыл бұрын

Sorry for the late reply, but I don’t think that particular Camo is going to be doable without hydro dipping. I would definitely recommend looking into it!

@ireallydontlikeu2607 2 жыл бұрын

This looks cool and u may be wrong but I just think that painting like this could jam things up and make it kinda sketchy if not unsafe to shoot but explain if I’m wrong 😁👍

@10milliBuddha. Жыл бұрын

How exactly? If the bolt is covered everything should work as normal

@dailysurvival1324 3 жыл бұрын

what are the colors of those paints 1st coat and 2nd coat..

@erickgalloway1393 3 жыл бұрын

I was about to ask the same question that second paint coat had a great brown dark earth look to it. Paint job turned out looking great!

@MuffinMammoth 5 жыл бұрын

Why did you use electrical tape versus actual painters tape?

@RadioSilence 5 жыл бұрын

Electric tape is less likely to peel at the edges and is easier to wrap around surfaces that aren't flat

@crobilotti 4 жыл бұрын

What is the bran of clear coat did you use?

@RadioSilence 4 жыл бұрын

Rustoleum, same brand as the spray paints

@granola661 5 жыл бұрын

this music confuses me

@blkbeardmane2727 2 жыл бұрын

Nice paint job! FYI If you paint your suppressor when you fire your weapon it will cook the paint on it leaving a smell for you to be detected. Happy hunting friends!