DIY Heat treating oven (build video)

Рет қаралды 1,414,422

4 жыл бұрын

Thanks a lot for watching, I hope you liked the video!
Don’t forget to SUBSCRIBE!
Folow me on INSTAGRAM!
/ avknives_
PART LIST:
Insulating fire bricks K23
High temperature refractory cement
A1 kanthal wire (1,2mm)
PID controller
K-type Thermocoupple
Solid state relay with heatsink.
Limit switch (NO)
Power switch
Ceramic connector
...
Inside dimension : 43cm x 18cm x 10cm (17x7x4 inch)
Spec:
U = 240V
R = 26,7Ω
I = 9A
P = 2150W

Пікірлер: 846

@todds1709 3 жыл бұрын

Have you noticed all the epic builds on YT comes from normal folks like this and not the ones with thousands of dollars of equipment in a seperate shop with bubinga wood cabinets. This dude is in his slippers at night with hand tools. Awesome work

@33europe52 3 жыл бұрын

A couple TIPS; 1. Try to use a thermometer that is made out of steel. Ceramic thermometers tend to break faster. And when they are exposed to high heat, they don’t measure as well. 2. Use more insulation. Preferably high heat ceramic wool. Now your oven needs to work longer to get to a certain temp. Best combination is using those white high heat bricks and ceramic wool. Plenty of it. But for the rest, very nice build!

@Miomi-dh4hx 5 ай бұрын

S type thermocouple is excellent

@AM-dn4lk 4 жыл бұрын

Beautiful work. You brought together several disciplines, welding, sheet metal work, electrical, control systems, kiln knowledge; and executed them all masterfully. Great job.

@victortaylor9399 4 жыл бұрын

Extremely impressive. You, Sir are a joy to watch in action.

@AllesHandarbeit 4 жыл бұрын

Best hardening furnace I've seen on YT ... greetings from Germany ...

@LatigoRanch 4 жыл бұрын

That was a beautiful build! Any time I see "DIY" in a video title, I expect things to look DIY. This looks like a quality product, and the details in the video were perfect. Quality content, right here!

@peechyman 4 жыл бұрын

The skills used in this video 💰💰💰...never out of work when you can do stuff like this. Mad props #salute

@randomguyfromtexas1185 3 жыл бұрын

SHOW OFF👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻great job!!!!!!!! I usually can’t sit and watch videos from start to finish, but I watched every second of this one and some spots I rewound and watched some parts multiple times. Seriously, what a fantastic job!!!!

@smaring777 4 жыл бұрын

This has got to be the best looking kiln I have ever laid eyes upon. Kudos sir.

@streetDAOC 3 жыл бұрын

Probably the best homemade heating oven I’ve ever seen

@DM-rp7ps 3 жыл бұрын

You are a terrific fabricator, the world could use more like you. It's an acquired skill not being picked up by as many younger folk with bright minds like yourself. Keep making the most of your available resources, and I hope you enjoy a long, productive life's journey - Great work!

@patrickkabuki7049 3 жыл бұрын

This is one of the best builds of something I've watched. I liked your precision cutting/fitting/welding... the unit looks so pro. Thanks for the inspiration.

@louisvanniekerk7667 5 ай бұрын

Excellent work

@gerry1337 2 жыл бұрын

Thanks AV that was at a totally different level, From the design to the build, execution to the detailing, right down to the vid itself brilliant, thanks so much. Loved it all.

@colonconquerer5635 3 жыл бұрын

This is incredibly satisfying and soothing to watch. Thank you.

@justasniper83 4 жыл бұрын

You did a GREAT WORK!!!!! Clean, well built and nice to see! BRAVO! Cheers from 🇮🇹

@vanepico 4 жыл бұрын

Wow, 1000 degrees from a 13a wall plug! The one at my work would just about get up to 500 and that used a 32a circuit. If I try making my own gears I'll definitely build one of these! Thanks for the video! It's going in my favourites!

@davidbothof1077 4 жыл бұрын

You, sir, do amazing work.

@carmineriganti2333 4 жыл бұрын

THIS is the nicest oven I ever seen anyone build 2 thumbs up to you.

@dalejones4186 4 жыл бұрын

You should be proud. That’s one class job. Thanks for sharing.

@ianmiles2505 4 жыл бұрын

Excellent craftmanship. You can be justifiably proud.

@jayantingole794 4 жыл бұрын

Its pleasure to see this kind of precise work, Share this kind as much as possible.

@wojciech_migda 4 жыл бұрын

Beautiful piece of work!!! BEST I have seen!!!

@JerrySwatsell 4 жыл бұрын

Very, very nice oven. Thank you for all the information you posted on the description. Great job!

@c.thomaschandler4784 2 жыл бұрын

I've been subscribed for awhile and just had to say thank you for the brilliant work, beautiful knives, and other builds. Truly a pleasure to watch and most definitely inspirational. Keep up the great work. Last but not least I love this build. It's professional grade.

@AlphaBobFloridaOverlord 4 жыл бұрын

Very nice workmanship! I’ve got one that looks very similar, but is about 50 years old (I upgraded it with a PID controller / solid state relay about 10 years ago). Mine is ready for new fire brick, and a new steel shell. I’m going to put a slab of steel in the bottom of mine so that the steel’s thermal mass maintains even temperature. These ovens tend to fluctuate a bit, especially when opening and closing the door. Again, outstanding workmanship and thank you for sharing this video.

@jmiddlefinger 4 жыл бұрын

What a fantastic, high-quality build!!!

@anthonydomanico8274 4 жыл бұрын

Awesome build! Thanks from the USA!

@carlo1195 4 жыл бұрын

What a beauty.A work of art.

@jefersonblacksoul 4 жыл бұрын

Beautiful work!! You are an excellent professional! I'm Brazilian, sorry if I have misspellings. Congratulations for the work 👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿

@anthonystrunk5360 4 жыл бұрын

Excellent build! Best looking heat treat oven on KZfaq.. great job!

@tray22 4 жыл бұрын

Absolutely beautiful! Well done, hope it serves you well into the future.

@bw7057 3 жыл бұрын

Fantastic build. Nicest I’ve seen so far! Bravo!!!!

@sidewinder30000 4 жыл бұрын

Great design and construction. Great job, i love it.

@SmartChannelSC 4 жыл бұрын

Потрясающая работа! Шикарное исполнение!

@jaso4321 3 жыл бұрын

Sensational build , very well done and I'm sure would be a inspiration to people thinking about building their own ! Excellent !

@EKeyLt 2 жыл бұрын

That was amazing, well done, love your attention to detail not only does the kiln look fantastic , your video was really well constructed and that’s evident in the absolute absents of words….. really well done , you should be very proud of your skills👍

@briand7489 4 жыл бұрын

Very professional looking. Looking forward to some to some Stainless steel knives.

@AVmake 4 жыл бұрын

Thanks man! Me too😀

@ciprojects4176 4 жыл бұрын

Hey man, that has to be the nicest homemade heat treating oven I have ever seen !!! Congratulations!

@AVmake 4 жыл бұрын

Thank you very much!😊

@robertcourtemanche4866 4 жыл бұрын

I agree , nice work !

@michaelcarter3149 4 жыл бұрын

For real man! I've seen quite a few people make their own heat treating oven, this surpasses all of them by miles!!!

@tvjknives9247 3 жыл бұрын

What steel are you using to Secure the heat element inside?

@leeharveygriswold6160 3 жыл бұрын

That's what I was going to say

@alifrusdan4855 3 жыл бұрын

Ur fitment skill is phenomenal

@dezsokosa9182 4 жыл бұрын

It's a beautiful job, it was a pleasure to watch !!! Congratulations!!!

@raphaelschaaf5606 4 жыл бұрын

Finally someone that uses a limit switch and grounds the enclosure. There are way to many build videos where people have no idea how to handle electricity. The connection between the wire and kanthal on the back should also be in an enclosure, since that is a live wire.

@Legacy_876 3 жыл бұрын

Hey I am having problems setting up my electric kiln, can someone help me out please, I am using REXC100 PID, 2500W heating element, SSR 40 0-32DCV and a LED transformer 20-40DCV....it gets going for a few minutes but then the heating elements stop heating can someone help me please

@AlessioSangalli 3 жыл бұрын

Why the limit switch? You mean the one that turns off the system when the door is open? Why is that desirable?

@leonbarnes1402 3 жыл бұрын

@@AlessioSangalli so you dont electricute yourself if you touch a knife against the heater wire

@AlessioSangalli 3 жыл бұрын

@@leonbarnes1402 because of the high surface resistance the risk is very low, however a switch of that kind is sure to tank the oven performance when it most needs it

@leonbarnes1402 3 жыл бұрын

@@AlessioSangalli id have thought the only time you would open the door is when your adding knives or removing them. you wouldnt need to keep opening it mid heat treat as you bake them for a set time.

@KENTEKELLER 3 жыл бұрын

This is astonishing! Well done.

@micstica 4 жыл бұрын

Now that was a nice, really nice build !

@Take_And_Make 4 жыл бұрын

Awesome oven! Soon we’ll see some beautiful knives heat treating in there!

@felipenascimento1986 3 жыл бұрын

Thank you very much, with the video and list of materials I will be able to build mine, it will be 1/3 the value of a similar industrialized equipment, greetings and thanks from this young Brazilian blacksmith.

@user-zo2zq8ru2i 4 жыл бұрын

Amazing job! Thanks for sharing, it’s perfect oven I have seen.

@robsubs1234 4 жыл бұрын

Very nice work! That is first rate DIY! Thanks for the video.

@sergiuraul1196 4 жыл бұрын

I don't often leave comments but this looks siiick!!! Wow!

@davidtoews5584 4 жыл бұрын

Just an absolute joy to watch your videos. So clean and simple yet elegant. This heat treating oven build will truly inspire others. Well done :)

@AVmake 4 жыл бұрын

Thanks man! Glad you like it 😀

@pepelitox900 3 жыл бұрын

Thank you, the best vidéo i never seen on a oven building. 😉👌🏼⚔️

@jamesdonnelly8888 2 жыл бұрын

Wow, amazing build. Very professional result, well done

@simonDon6645 4 жыл бұрын

Nice build like the handle design.

@cheynefaravoni2250 3 жыл бұрын

I wish i could replicate this. They cost soo much. Seriously good job Mate!

@ConradKnives 3 жыл бұрын

I really neet to build one of these myself. Beautiful craftsmanship

@Ifixmyownstuff 4 жыл бұрын

id buy that from you ina heartbeat. thanks for the video. some really nice attention to detail here folks!

@thunderbugcreative7778 Жыл бұрын

So clean and simple great job!

@andybrock100 4 жыл бұрын

Absolutely incredible build, only problem is your skills are wayyyyyyyy above what the average DIY can achieve!

@borden2417 4 жыл бұрын

Great oven build. Just what I need.👍

@josetadeumantovani5706 4 жыл бұрын

CONGRATS MY FRIEND! THANK YOU!

@Mrcaffinebean 4 жыл бұрын

Very nice work! Really a simple build and you make it look very professional. Great work

@jamal69jackson77 4 жыл бұрын

Man are you serious? That's like some world class piece of equipment you just built! I could probably duplicate it, but I get lost in the electrics and electronics department. Incredible job, incredible video!

@brandysigmon9066 3 жыл бұрын

You can build one, just take your time

@jamal69jackson77 3 жыл бұрын

@@brandysigmon9066 indeed I believe I could if I knew how to wire the electronics, but but without having specific guidance it wouldn't matter how much I took my time, I would not be able to do it properly. I would require a step by step visual video or live guide because I do not understand electronic and wiring schematics that are in printed diagram form, unless they are very specific and explanatory and they rarely are easy to understand unless you are well versed in these things to begin with. But thanks you for the vote of confidence 🙂

@randomguyfromtexas1185 3 жыл бұрын

Jamal69 Jackson I’m the same way, I can build just about anything in the world, but when it comes to wiring and electronics I am screwed. I don’t understand electrical schematics at all unless they’re written in crayon and explained to me like I’m a 3 year and then I’m still at a loss!!!

@jamal69jackson77 3 жыл бұрын

@@randomguyfromtexas1185 lol, then we understand each other. But yeah man, I would need a course in understanding wiring schematics for me to ever decipher them.

@samscoalfiredpizza8152 3 жыл бұрын

Anyway I can get a link to the parts used. I would love to make a killer brick pizza oven. One that can handle 12 pizzas at once. All electric

@beil3537 3 жыл бұрын

Awesome workmanship well done!

@gmcg6326 4 жыл бұрын

Absolutely beautiful. First we had the Gough jig, now the hobbyist will have the AV oven.

@mrsensable 4 жыл бұрын

Actually Aaron coppied the sandpaper jig off another fella.

@gmcg6326 4 жыл бұрын

@@mrsensable it's that thing we do where the brand name become the generic name. A good example is the Jacuzzi; that's a generic name for a hot tub, but also a brand of hot tub. The two words are interchangeable. That is an interesting point though.

@nalaka1977 3 жыл бұрын

This is perfect ! Great job!

@johnjackson9767 3 жыл бұрын

Beautifully done.

@hermit3400 4 жыл бұрын

What a top notch job! Definitely the best on KZfaq! Can you provide a link or more detailed information on the particular Type K Thermocouple you used. What are the specs for it? Thanks for making such a great video!!

@timothylott4092 3 жыл бұрын

Awesome JOB Love the design. I might use some of your techniques to build a forge

@pEpICkru 4 жыл бұрын

Very precision work man, i like this 👍

@CHNGRCN 3 жыл бұрын

Perfect job! Congratulations.. 👏👏

@laiky71 4 жыл бұрын

Beautiful design!

@mrsaskriders 4 жыл бұрын

Just an awesome VERY professional job! 👏👏👏👏👍👍👍👍👍👍

@J8532M 4 жыл бұрын

Excelente Trabajo!!! Y mano de obra!!! Saludos desde Argentina.🇦🇷🇦🇷🇦🇷

@arianlaser 3 жыл бұрын

Preciso al millimetro, efficace e geniale ... mani che sanno cosa fare. Grande ! !

@wingnutbert9685 4 жыл бұрын

My hat is off to you. Very professional looking. I just ain't got the wattage between the ears to figure this stuff out. If you ever think of doing a step by step set of instructions for purchase, let us know. And if you need a tester to see if the instructions are dyslexic idiot proof, I'm happy to lend my easily confused assistance. :)

@IamFormaggio 4 жыл бұрын

Outstanding work.

@Aardrijk1 4 жыл бұрын

Great design and construction

@c4dan 2 жыл бұрын

Beautiful craftsmanship

@gerhardschnabel8434 3 жыл бұрын

cool stuff! you have inspired me. Thanks! Great video....so much better than TV!

@mrrexy4151 4 жыл бұрын

Very nice work, thanks AV 💪

@rakoom2 4 жыл бұрын

This is so Awesome. Best Work ever

@antonioquintero7863 3 жыл бұрын

Beatiful work! Nice to see, thanks!

@travelfoodbusinessbestheyyono 3 жыл бұрын

This happens when an artist becomes an engineer!

@ironhand9096 4 жыл бұрын

Never seen any of your videos before but that was an instant subscribe. I don’t understand why you got any thumbs down. I’d buy an oven off you any day.👍

@neilhay2155 3 жыл бұрын

Great work. Looks better than a brought one. Thanks for sharing.

@tigerteff015 Жыл бұрын

A professional job.

@davidcapes9629 3 жыл бұрын

Beautiful, just beautiful

@perrierri7687 4 жыл бұрын

What a professionall build! Nice job!

@AVmake 4 жыл бұрын

Thank you!😀

@thenakedcarpenter2502 4 жыл бұрын

so good. so good. you should draw up some plans!

@mnldgbD 4 жыл бұрын

Great video, greetings from Portugal!!

@ronin2963 4 жыл бұрын

I'm impressed 👏 😎

@williamiannucci2740 4 жыл бұрын

Would love to see you make some carbon steel knives like they used to that's when Knights had knives .

@nickmcnellis3937 2 жыл бұрын

Super nice build.

@amschind 3 жыл бұрын

I have never seen a 240v PID before.....I don't know why, but I always run mine on 12V. If I had to give a reason, I'd say it's that I want to limit high voltage AC to as few places as possible, where I know that 12VDC won't kill me if I touch the wrong thing. I do really appreciate seeing which wire you used as a heating element.