DIY hologram projector

Рет қаралды 170,836

5 жыл бұрын

Laser cutting files for projects: 1drv.ms/u/s!AoheYC_0p7OWlbUvB...
Example video of a holographic projection being used: 1drv.ms/u/s!AoheYC_0p7OWns5Yy...
*All files are sized for a 10.5" iPad (with home button)
**The character in the video is Azuma Lim, a virtual youtuber. 3D models in the video are from the official distribution and are copyrighted by the virtual youtuber. Please use the video for example in accordance with the relevant regulations or laws.

Пікірлер: 75

@susanclark6987 2 жыл бұрын

Wow that was really fast and good... I'm 63 and actually understood this! Thank you.

@renukajoshi3854 3 жыл бұрын

what I liked about the video, is the way concept is well explained. Thank you

@oneroom2660 Жыл бұрын

This relates to our very own reality which exist of a quantum 2D timeline frame, projected on a euclidean space which reflects a 3D hologram also known as a 3D Dimension.

@poojatandi4331 2 жыл бұрын

Ty so much for this video I got 1st prize for this

@milezborja7582 3 жыл бұрын

i saw the picture from yt so i was thinking this was so easy and i ca do it in one picture and i can ill build it tomorrow

@robhersh8320 Жыл бұрын

So interesting.

@lm6194 3 жыл бұрын

What kind of tea do I need?

@ventus365 4 жыл бұрын

I was wondering why do some prefer to make each side a trapezoid instead of a triangle as shown in your video? Does the trapezoid side have a smoother transition when we look around it?

@kaizin1685 4 жыл бұрын

Because the tip of the triangle is so thin, it can display a very small area of the image. In my work, you can also see that the top of the figure (the hat) is partly out of the display range. It is true that trapezoids are better for displaying rectangular images. However, if you use a trapezoid, the distance between the four sides will be longer and may not be suitable for displaying a tall and narrow image. (My English may not be very good.)

@chavenyenketswamy1498 2 жыл бұрын

So you can place the pyramid to stand upright on the small side. Most hologram videos on KZfaq will be upside down if the pyramid was placed on its base.

@kangsora32 2 жыл бұрын

can you please tell me the measurements you used for the pyramid.

@kaizin1685 2 жыл бұрын

@@kangsora32 The length of the bottom side of the isosceles triangle is equal to the length of the short side of the display, and the height is equal to the square root of "the square number of the bottom side divided by two".

@youraveragegamer5824 4 жыл бұрын

imaine playing yugioh with this on the table, that would be dope

@kooliongaaa 2 ай бұрын

Which application you using to project video on plastic?

@elmerjosephbuenvenida2913 Жыл бұрын

Hi, can you please help me with the sizes or dimensions of the pyramids in centimeters? My ipad is 16.5 cm (width) and 24cm(Length). thank you

@Pro-dd4dv 4 жыл бұрын

Wouldn't it display more clearly if we put resin inside the pyramid?

@kaizin1685 4 жыл бұрын

You need to make sure the resin is transparent enough. But in reality, you can make the projection clearer just by making the monitor brighter.

@QuezAshBurn888 3 жыл бұрын

Is there an application that provides holographic videos? Most found in youtube are in reverse pyramid. Thanks

@kaizin1685 3 жыл бұрын

Sorry, I don't know. I made my own video.

@janvaneynde1373 3 жыл бұрын

Qizhan Chen how did you make the video?

@kaizin1685 3 жыл бұрын

@@janvaneynde1373 I use a 3D animation software called "MikuMikuDance" and there are a lot of free 3d models and motion files available on the internet.

@janvaneynde1373 3 жыл бұрын

@@kaizin1685 Nice, thanks!

@diffaaulia 9 ай бұрын

hey, this is a great tutorial. i kinda wanna recreate this, can i get the exact measurement? i saw your files but there's no numbers in it

@kaizin1685 8 ай бұрын

You can download the file and open it in Adobe Illustrator (or other compatible software). The file contains the correct dimensional information and you can measure the length of each line in the software. Or you can just use the file for laser cutting

@koko.997 3 жыл бұрын

is there another way to cut wood? I really need to do my project but I cant cut the wood properly :(

@kaizin1685 3 жыл бұрын

You can use other materials to make, such as 3d printing

@CR0NO-NL 11 ай бұрын

Could this be done with only the front view (no sides or backside) with a height of a meter or more?

@kaizin1685 8 ай бұрын

Yes, you can do that. Just one side would be easy, but it would require a very large display, or you could optimize this by adding lenses to the design

@ragulbalajeegk3290 2 жыл бұрын

any small projector

@fatimalov7406 2 жыл бұрын

i am intrested can i buy

@positiveahay7167 4 жыл бұрын

What to do if I wanna make it bigger

@kaizin1685 4 жыл бұрын

Wadani PODCAST Replace the ipad with a larger display. The model is scaled up.

@positiveahay7167 4 жыл бұрын

@@kaizin1685 will the model show fully or?...

@kaizin1685 4 жыл бұрын

@@positiveahay7167 You need to make everything bigger, including support and transparent pyramids. The 3D model displayed in that case is still fully.

@positiveahay7167 4 жыл бұрын

@@kaizin1685 alright got ya thank you

@ren1aro295 3 жыл бұрын

How height your project?plz tell me

@kaizin1685 3 жыл бұрын

About 20 cm

@DeJaVuCa 7 ай бұрын

More information on how & why in a minute at .21 ts than an hour of another

@Shuttered 2 жыл бұрын

Hey, would it be possible to get the file with the dimensions please?

@kaizin1685 2 жыл бұрын

1drv.ms/u/s!AoheYC_0p7OWlbUvB5VwKGCWfRn3dw?e=AIZMqj

@Shuttered 2 жыл бұрын

@@kaizin1685 Thank you so much for sharing!

@lunatorres2827 2 жыл бұрын

principio es colocar una

@meandmyedits4401 2 жыл бұрын

if anyone has the file can you please send it to me I need it for a project

@kaizin1685 2 жыл бұрын

1drv.ms/u/s!AoheYC_0p7OWlbUvB5VwKGCWfRn3dw?e=AIZMqj

@dawidturczak8864 11 ай бұрын

@@kaizin1685 second file is empty?

@banaemad9685 2 жыл бұрын

can i get the laser cut file?

@kaizin1685 2 жыл бұрын

1drv.ms/u/s!AoheYC_0p7OWlbUvB5VwKGCWfRn3dw?e=AIZMqj

@movienightwithrehan1687 2 жыл бұрын

Does somebody have the video he used

@kaizin1685 Жыл бұрын

I have put it in the description of the video, you can find the download link. The video, although made by me, uses 3D models from the Internet, so you may need to be aware of copyright-related terms or regulations when using this video.

@lily6137 3 жыл бұрын

can i get the cut size thank you very much :D

@kaizin1685 3 жыл бұрын

I can send you the file made by adobe illustrator. If you want, you can leave your email address

@meandmyedits4401 2 жыл бұрын

could you send me the file @lily

@gayathriuwu1870 2 жыл бұрын

Hello, could you please share the file with me? Thank you 🥺

@kaizin1685 2 жыл бұрын

@@gayathriuwu1870 @ME and my EDITS 1drv.ms/u/s!AoheYC_0p7OWlbUvB5VwKGCWfRn3dw?e=AIZMqj

@kaizin1685 2 жыл бұрын

@@meandmyedits4401 1drv.ms/u/s!AoheYC_0p7OWlbUvB5VwKGCWfRn3dw?e=AIZMqj

@alexiabastos6924 2 жыл бұрын

hello could you send the measurements to me?

@kaizin1685 2 жыл бұрын

The length of the bottom edge of each isosceles plastic piece of the pyramid is equal to the length of the short side of your display, and the height is equal to the square root of "the square of the bottom edge divided by two".

@husseingaher8516 3 жыл бұрын

Can I get the laser cut file please?

@kaizin1685 3 жыл бұрын

email？

@husseingaher8516 3 жыл бұрын

Qizhan Chen yes please send me it on this email I thank u very very much h.gaher@nu.edu.eg

@husseingaher8516 3 жыл бұрын

h.gaher@nu.edu.eg

@kaizin1685 3 жыл бұрын

@@husseingaher8516 I apologize for the late reply. The email has been sent.

@stephencallcott3583 3 жыл бұрын

could I have it sent to stephenscallcott@gmail.com? thanks in advance!

@jhonmarkmarinas3180 4 жыл бұрын

what's the title video you use ?

@kaizin1685 4 жыл бұрын

Are you referring to the video used for the presentation? That's a virtual character named Azuma Lim.

@westlethegreat6388 2 жыл бұрын

Bruh just use some card board lying around the house why are you using a laser cutter on quality materials for this Edit: oh I get it. The wood will take the spray paint better than cardboard. Now it makes sense

@kaizin1685 2 жыл бұрын

I'm just afraid that the ipad pro is too heavy to make the cardboard deformation.