Thank you ever so much for this. I just fixed the horn on my 2012 Tundra. Now its ready for inspection. And a tip for those unsure if it is the clockspring or wiring or fuses ..... press the PANIC button on your key fob. If the horn honks, then you need a clockspring. If it don't, then there are other electrical issues.

"Dad" thank you so much! I just finished replacing the clock spring in my 2011 Tundra. I'm not mechanically inclined, and it was very easy with your video. Showing me all the tools required to complete the job was really a BIG help. John BEE thanks for the tip about the PANIC button on my key fob - it confirmed that my clock spring needed replacing. Bob Brown, your tip saved face for me. I found my clock spring on Parts Geek for $122. It took me a total of 1 hour. Beep! Beep!!

By far one of the best instructional videos. Super cost savings by doing it yourself. Never knew how much i needed a horn until mine stopped working. No more being cutoff by lousy driver's.

What is the bolt torque spec????

Awesome video!! Thank you so much for taking the time to enlighten us on simple DIY mechanics. I was a tank mechanic in the army and I do most of my own work, but I've never had a horn go out. This was a treasure to find. You rock.🤟🏽🤍🤟🏽

Thank you for this video! I watched it while changing out the clock spring on my 2014 Tundra over the weekend. There was one tool you left out though, a steering wheel puller, couldn't get my steering wheel off without one but luckily NAPA had one on sale for only $20.00.

Thank you Thank you Thank you! I accidently wound my security badge lanyard around my steering wheel by holding it in my hand while passing thru a vehicle gate and trashed my clock spring mechanism trying to free it. Was dreading having to have my Tundra in the shop for an entire day. Your video gave me the confidence to try it myself. Wow! Great video with clear instructions! I have no doubt that you saved me several hundred dollars and an entire day.

Thank you so much- great video! Helped me out step by step- no problems. My airbag side mounting bolts were T30 for 2012 Tundra. Horn works! If your horn doesn’t work but it goes off when you press the panic button, you know it’s the clock spring.

This was my first time ever doing something like this and your video made it a straight-forward process. I'll need to redo the steps to make sure my steering wheel and tires are straight and tighten that nut back to align everything again. Thank you for making this video!

Excellent job putting this together. The only thing I did additionally was mark the wheel so I would put it on in the exact same orientation during reassembly. Thank you sir!

Thank you, so much for the video. We replaced the clock spring on our 2012 Toyota Tundra Platinum. We struggled removing the steering wheel, but easily resolved the issue by renting a tool from O’reily’s. The whole process took about an hour including renting the steering wheel puller. We researched the torque for the steering wheel bolt and found 37 lbs was recommended torque for our vehicle.

Great video showed everything that needed to be done! One suggestion, when pulling the steering wheel by hand Leave the nut partially on the bolt so the wheel will not come off and hit you in the face. I just tapped on the back of the wheel and it came loose but did not fall off because the nut held it on.

Thanks so much for the video. My cruise control hasn't worked in months and I was super frustrated. Replaced my clock spring and now it works.

This worked exactly as explained on my 2011 Tundra SR5. Saved some money not buying wheel puller!

That was a great video, thank you, and I'm glad that airbag didn't go off since you unhooked the positive on your battery rather than the negative 😅

Fantastic video, so comprehensive from start to finish, highlighting the most important and difficult parts. Only change for my 2014 tundra was the side airbag bolts were T30. Thanks very much for the video! Also, RockAuto had a new Dorman with lifetime warranty for $195 way cheaper then local auto stores and the dealer wanted $318.

Great job with the video and repair!!!, hope this will resolve my horn issue my fuses are good and I did a direct test to make sure the horns work the panic switch works so guess I’ll be making this purchase and tackle this job, again great job with instructions and great video quality Thanks

Great video. I used your video for guidance and replaced my clockspring (had no horn). This was my first time messing with an airbag or clockspring and because of your video, My truck and my safety inspection are good to go. Greatly appreciate it!! Thank you!

Thanks a million! I just replaced the clock spring on my 2012 4Runner LTD. No issues at all. It took me less time to get it done than to drive to a dealer thanks to your very clear step by step instructions.

Thx a lot! Great instructions! 🤜💥🤛 I just finished mine, and it only took about 18 to 20 mins. 👍👍

Thank you very much ! This is the best video of changing the clock spring on Toyota tundra!

Thanks for the very helpfull video. Made it super easy to do and saved me a bundle. Less than $25 (Can) on Amazon and took 35 minutes start to finish. So a lot saved over what the Toyota dealer wanted!

Me too! Thankyou so much! I just changed my clockspring in my 2015 Tundra. Thanks to your vidéo I was totaly stress-free about starting this job. It took less than half an hour.

thanks for the how-to ... just did my wife's 4Runner, but had to run to O'Reilly for a steering wheel puller. I was nervous about the airbag, so I wore my dirt bike helmet in there while I pulled the wire clips LOL. It was no big deal at all.

Just completed this using your awesome step by step video. So simple. I’m a handy 53 yo female but still, easy peasy. I got my clock spring from partgeek for about 125 I think. Works great. Thank you!!!!!

Torque spec???

Thanks u from Chile, its took me like 50 minutes step by step. The clock spring was bought in ebay btw, 60usd made in japan.

Thanks for the help! Changed clock spring in 30 minutes and my horn works again. Figure that saved me $400 over dealer install! Part was $38 on Amazon.

Bolt torque spec? Thanks

Very informative and awesome video! This helped us replace the clock spring in my son’s truck. Thanks to this video we were in and out in no time! Thank you!

Thank you so much. Followed step by step. Bought one off Ebay for $50. Saved myself $600 that the shop wanted..

I bought the spring in ebay for $13.00 thanks for the install directions. No need to disconnect the battery.

Thanks for the step by step vid. A lot more concise compared to most others. Just an FYI for folks out there. It took some force to remove the steering wheel after the bolt is removed. I unlocked the steering wheel hight and extend adjustment and gave a quick pull towards me. It popped the front of the clock spring cover off but no damage to anything else. It is being replaced anyway. Just take precaution.

Thanks for making this video. Got my horn working on 2011 tundra. Purchased clock spring on eBay for $45

I just replaced mine in my 2012 tundra and it was all because of you and this video! Thank you so much for sharing and for your simple instructions! I know I saved some money on this one! Although, the Oreilly price has gone up almost $100 since you bought it! Yay.

Excellent video!! Thanks so much for posting!! My Son-in-Law and I fixed his 2014 Tundra so that it will now pass inspection!

Thanks Dad! Just fixed my 2013 Tundra. I did find the clock spring on a website (ebay I think) for about $30. Hope it is high quality. Thanks again.

Thank you for such clear instructions! Very appreciated!

Extremely helpful. Bought the part from Rockauto and installed during my lunch. Thank you very much for making this video.

Unsolicited advice when starting to remove the airbag torx screws. 1. Torx keys won’t work. The screw is very tight on. When inserting the short end, it can’t reach the screw due to the plastic trim. When inserting the long end, the opposite end doesn’t allow enough torque/leverage to unscrew it. I turned until my hands bled/scratched and I still couldn’t get it off. 2. You need a T27 Torx socket to overcome the first note. 3. You need a socket extension. The T27 Torx socket won’t reach the Torx screw. The socket alone is too short, and the plastic trim prevents the ratchet from coming any closer. Good luck

Awesome presentation! Very thorough and explaining every step. Thanks!

You are a Rock Star!!! Video was perfect and spot on. Less than 45 minutes and I was up and running again thanks, Brother!

Thanks for the video. Very helpful. Just FYI, I'd purchased mine from eBay for $29 and it's Oem part.

Thank you literally took me 20 minutes thanks to your video instruction.

Video was perfect I followed step by step it was great. Fixed a problem I had for a year

Really well done! Followed step by step and it took about 45 minutes. Thank you!

Important note: Make sure the front wheels are Centered also, not just the steering wheel.

Wait a minute. Didn't hear what the torque was on the steering nut or the torx bits.

Very helpful I am a Toyota tech but have only done one clockspring or two and it was like 10 years ago. I need to replace mine after breaking it on accident when I replaced my steering rack. Very helpful thank again, great video.

Great job, perfect instructional video!

Used this info to get to my combo switch (added fog lights). Thanks for sharing!

This video was awesome! I figured if you could do it one handed I could do it with two. Super video made it easy!! Thank you.

Great video! Im so nervous about messing with the air bags. I may just add a train horn instead with an external switch

Great video took me about an hour. Didn't want to screw it up.😊

What is the recommended torque ? Thanks for the video

This production helped me fix my horn as well! Thanks!

Thank you, your walkthrough made this job a breeze!

Your video helped me out so much great job you’re very thorough and I appreciate that.. thank you

This video literally solved my problem! Thank you so much!

15 minutes with 2 hands. Great video

Thanks it saved me !

Excellent video it helps a lot...step by step....thanks guy..

Super!!!! U R the guy!!!! Great video!! Helpful!!

Thank you for making this video, I will be replacing mine in the near future.

Excellent explanation

What was the proper torque spec I have the same truck

"Remove the ground cable (the negative)" as he removes the positive (hot) terminal. Other than that, solid video. Thanks for the help.

You are the man 👏🏾👏🏾

Thank you sir Great video Waiting for the pry to do mine 2013 tundra

Hi what is the bolt torque specs?

Thanks Dad!

Well done sir! Saved me a fistful of cash. Hard to find torque info on the nuts but very good video and narration.

Is this also applicable for the 2004

Are you freaking kidding me? My local mechanic shop wanted $750 to do this job! WTF. I can do this myself in 30 minutes.

My CC isn't working on my 08 tundra and I just replaced the CC switch. Still, the cruise won't turn on. I DO have horn so I don't think it's my clock spring. Gonna check tail/brake lights and brake switch tomorrow. If that's all good, I'll really be stumped!

lost communication with steering angle sensor module after replacing my clock spring. Anyway to fix it

Thanks!!!

I bought a genuine Toyota clock spring for $38 after tax and shipping on eBay

After replacing my clock sping in my 2012 tundra (thanks for your video), my turn signals no longer self-cancel. Any tips to what I missed which may have caused this new issue?

Just did this. Rockauto 60$ one. Thanks!!!!!!!

Great video, thank you!

outstanding! Thanks

So I have a 2012 tundra and the horn isn’t working except when the steering wheel is turned to the left. Once it’s straight or further to the right the horn does not work. I’m assuming the clock spring is the issue?

What’s the torque specs

$283? I think I’ll just keep using my yodelling

Mine just stopped, not sure how long ago. 2021, 180k. Thanks for sharing

Another video shows a guy just greasing the bearings to complete the ground for this fix.

Muy buen video my tundra tiene el mismo problema

How do you test the actual horn switch in the wheel pad?

Not working for me can please tell me which pin from the relay harness I have to put power if see the horns pip and see if that the problem because has 3 harners and 1 small and I dont know how test the power from the integrated relay harness 😢

Will this process be the same on the 2012 Toyota Tundra?

Great video ty

Hi dear, I have the same model 2008 Tundra. The horn wears out, and every time I change a part, it wears out in a week or so. Are there reasons!! Is there a correct way to install? Can you help me bro, thank you

Thank you sir for the video!

So is it possible to install your steering wheel crooked on a gen 1 tundra?

Bro u can tell people here don’t kno anything about cars but come on guys bragging about buying parts off Amazon u get what u pay I had too pay for pully replacement on 2012 tundra and it cost me double cuz I didn’t go with oem parts !!!

Does this work on a 2003 Tundra?

Does anyone know what the actual part number is for the clock spring?

This should have been a recall. Oh well. Thanks for the help!

Thank you . nice and easy only $16.00 on ebay