DIY Hot Wheels Track for less than $50

Рет қаралды 36,784

Frugal Diecaster

Күн бұрын

How to build a homemade Hot Wheels track for less than $50.

Пікірлер: 61

@darrenfood 4 ай бұрын

Great idea for a start gate, exactly what I was looking for.

@WestTexasDiecast 4 ай бұрын

Great idea! You’ve obviously came a long way since the making of this video. My Playrobotics timing system just shipped this week, you inspired me to get one 😎

@frugaldiecaster4026 4 ай бұрын

Thank you! I love my Playrobotics starting gate, but it does have its little quirks. The best part of it is the remote control! Make sure you get some extra wire extensions if your track is longer than 6 feet!

@natelarge 3 жыл бұрын

Top Quality build. Love it when someone makes something that they are passionate about.

@talladega500inches4 11 ай бұрын

I’m trying to build a starting gate that doesn’t require me climbing up a ladder, yours is the third I’ve come to, haven’t even watched your video yet, I just had to tell you I love the name the frugal die caster 😂😂😂I’ve got a 500 inch track the gate is 10 ft off the ground, it’s one hell of a contraption, but I’m proud to say it’s completely made from stuff people were throwing away. I have literally $00 in the track, old vinyl siding is a great track surface.

@talladega500inches4 11 ай бұрын

I’ve watched the video now and think it’s genius in its simplicity, and I’ll be trying my hand at it, I’ve tried a pin drop gate years ago that never worked quite right. I’m a subscriber now, and appreciate the starting gate idea, when you have a minute, check out them 500 inches.

@TinyGarage 3 ай бұрын

Awesome work, thanks for sharing your process and knowledge!

@Geeksiders 4 жыл бұрын

This is genius! Been looking for a good diy starting gate. Yours is hands down the best

@3Dbotmaker 5 жыл бұрын

Very cool set up. Nice clean design.

@abatallsoldchannel5216 3 жыл бұрын

Hi 3Dbotmaker I’m a huge fan

@MUSTANGHUNTER 2 жыл бұрын

You know it's good when 3Dbotmaker likes and approves it🤙

@carlphillips5828 3 жыл бұрын

Love how you did this homemade track.

@freethinker3161 4 жыл бұрын

Holy s*** that's awesome bro. Me and my son are now playing a lot of Hot Wheels. I've been frustrated at putting the tracks together. Been watching KZfaq for tips and tricks. I think I'm definitely going to copy this. Great work.

@desirablematchbox 2 жыл бұрын

Very nice. I especially like the way you did the starting gate. I plan to build a track just like this one. Matchbox and Hot Wheels racing will start on my channel next year.

@dougscustomcargarage3434 3 жыл бұрын

Great ideas cant wait to see more on the cheap

@DieCastDadLife 4 ай бұрын

Great idea!!

@SouthernDieCastChallenge 2 ай бұрын

Thanks for the Great Idea !

@frugaldiecaster4026 2 ай бұрын

My pleasure, thanks for watching! That was the first video I ever did and it was about 5 years ago, thinking about building another one.

@SouthernDieCastChallenge 2 ай бұрын

@@frugaldiecaster4026 please do , I would watch it

@MUSTANGHUNTER 2 жыл бұрын

Wow this came out great!

@Mikeisoutside 3 жыл бұрын

Just subbed that’s a super cool track thanks for sharing

@mariokarthotwheels Жыл бұрын

Really nice done. Bravo 👏👏👏👏

@TEAMROV10 9 ай бұрын

It's actually perfect!

@matthewtravis2386 Жыл бұрын

Great job 👏

@gustavomoreno8631 4 жыл бұрын

Doing this today ! On my way to pick up some material

@DJBastor 2 жыл бұрын

These cars are very fast. Good job. You know need a finishing gate :)

@jrsdiecastcars1595 5 жыл бұрын

That is really cool nice video

@diecastmaniac2301 3 жыл бұрын

Looks great. Just subscribed.

@greatbasingoldrush 9 ай бұрын

Good video

@bandidodelcaminodiecast 3 жыл бұрын

Very cool 👍🏁

@ChapmanFilms 5 жыл бұрын

That was awesome

@frugaldiecaster4026 5 жыл бұрын

That’s a heck of a comment coming from you, your videos help inspire me to make it!

@lawyerslastbreath 3 жыл бұрын

I’m doing this ASAP !!! :)

@ThinkerOnTheBus 3 күн бұрын

You should consider making a mechanism that flags the winner's lane. Should be able to make one somewhat similar to what is available for Hot Wheels. You could keep it simple, all mechanical with no electronics, and just have it flag the winner's lane. Then again, if you have the electronical engineering know-how, then you probably have enough spare parts lying around that you could build a finish line detector with a digital display indicating what place the car of each lane finished in. Something to consider, for if it were keep strictly mechanical, I don't see much difficulty in designing, and constructing a mechanism that would simply identify the winner.

@frugaldiecaster4026 2 күн бұрын

Unfortunately I haven’t had that track in over 5 years, BUT I will be building a new one here in the coming weeks!

@jaeer.campose 5 жыл бұрын

Can you put list of materials on the description box

@garylanzarone5842 3 жыл бұрын

Like what you did at the starting line. See what I came up with for some turns diy on my channel. Some short clips. Keep up the good work. Can't wait to see what you do with the rest.

@troyrubiales8429 3 жыл бұрын

amazing

@rcbulldog8698 5 жыл бұрын

Nice! I got lucky and found a vintage 6 foot Hot Wheels 4 lane track with start and finish gates for $25 on Facebook marketplace. Cheers!

@Madman2416 4 жыл бұрын

RC Bulldog oh yeah facebook can be very good!

@FlipperFord13 5 жыл бұрын

nice

@darrenfood 4 ай бұрын

In the planning stage of making a version of this. My main concern is the starting gate being able to hold the cars in place without them pushing through before they're released. Did you just make it stiff enough to prevent this? I'd worry about it becoming loose over time. Was considering using a couple of pegs and a small rubber band that holds it in the start position, but not sure if that's really necessary.

@frugaldiecaster4026 4 ай бұрын

Actually it was real weird how it stayed stiff when the dowels were in the down position, just needing slight tug, it would come loose. I think it was because the drill hole that the gate goes through wasn’t a perfect circle. So when you twist the gate, it would be loose as it went around until it hit that defect in the drill hole then stick slightly. Not sure if it was dumb luck or bad engineering that just worked out lol. I would suggest something that blocks it from spinning all the way, like a pair of pegs like you mentioned.

@darrenfood 4 ай бұрын

Great, thanks for the reply.@@frugaldiecaster4026

@matthewho496 3 жыл бұрын

Hello I love your video clip, this video wa awesome. Also, where can I buy 6 LANES ORANGE TRACK? Thank you

@bubbadurel3783 3 жыл бұрын

Those were individual lanes / pieces of track placed beside one another.

@bigsmalls8354 3 жыл бұрын

Did u glue the tracks on?

@alexs116 6 ай бұрын

At 6 minutes I thought for sure he was going to say girlfriend lol

@frugaldiecaster4026 6 ай бұрын

That too…..

@johnmeeler9737 5 жыл бұрын

this is great looking forward to races at your track. it needs a name. who are you going to sell the naming rights to? lol 3dbotmaker probably has something that will work as finish line. all of 3dbotmaker products are great.

@frugaldiecaster4026 5 жыл бұрын

Thanks! Funny you mention that because I was thinking about a name the other night.....and I did order a 4 lane finish gate from 3dbotmaker and it should be here soon!

@johnmeeler9737 5 жыл бұрын

@@frugaldiecaster4026 I am looking forward to the racing that track is nice and fast

@o8thman812 4 жыл бұрын

Lady: what are you doin in the garage at 2am? Me: making hotwheels racetrack starting gate... Lady: you were 7 52yrs ago.

@anilyazar_ 4 жыл бұрын

Last line door is looking not aligned

@captcorajus 4 жыл бұрын

Unrelated, but you sound like Christian Slater. lol

@ThePurpleHarpoon 7 ай бұрын

Those nails at the top look kinda in the way, and you could easily scrape some skin off your hand if you're not careful. Why not just screw the first sections of track to the board (using small round-head screws)permanently, and get those nasty nails out of the situation.