DIY: HOW I PUT WATER SLIDE DECALS ON RESIN DOMINOES USING CRICUT

Рет қаралды 12,908

3 жыл бұрын

This video will demonstrate how to make black glitter dominoes, how to print and cut water slides using your cricut, and how to apply water slides to your dominoes.
VIDEO EDIT: SPRAY YOUR SEALANT BEFORE CUTTING ON YOUR CRICUT.
SUPPLIES PURCHASED ON AMAZON:
EPOCH PAPER BRAND - WHITE WATERSLIDE DECAL
MOLD MADE WITH MOLD STAR 15 SILICON - I made the mold with MOLD STAR 15 SLOW SILICON purchased from Amazon and the lid is from the plastic container I used to make the mold.

Пікірлер: 50

@clutteredgypsie 26 күн бұрын

Wow! You've just opened up a whole new world for me! Ahhh Thank you so much for your awesome demonstration! I love your style and I'm now an instant subscriber! ❤ Bless you!

@ivycastlecrafts 3 жыл бұрын

I’m so impressed that you made your own mold. They look great!

@diyhookedoncustomcrafts6901 3 жыл бұрын

1st Lady Antiks, thank you, thank you, so much for the awesome comments!😊

@diannasantiago3506 3 жыл бұрын

Yes!!! I would definitely buy one!

@lisacapers2181 3 жыл бұрын

Your dominoes are beautiful and the decals killin. I hope be like you and make beautiful dominoes. Thanks Lisa 😊

@diyhookedoncustomcrafts6901 3 жыл бұрын

Wow thank you! Just takes a little practice and patience. 😋

@whatsnikicooking6086 3 жыл бұрын

I looove these! 🖤

@diyhookedoncustomcrafts6901 3 жыл бұрын

Thank you soooo much! 🙂

@deannaaubert1005 3 жыл бұрын

So awesome. Thanks

@diyhookedoncustomcrafts6901 3 жыл бұрын

Hi Deanna and thank you!

@rosangelarodrigues6865 2 жыл бұрын

São lindos ja comprei as formas pra fazer aqui

@diannasantiago3506 3 жыл бұрын

Making similar ones using this waterslide! Can't wait for it to finish curing.

@diannasantiago3506 3 жыл бұрын

Thanks for the idea!!

@diyhookedoncustomcrafts6901 3 жыл бұрын

TFW! Great these are great water slides to use I hope your project is a success!

@TheTbgh 3 жыл бұрын

I loooove this. How much resin did you use for this project? I always make too much or not enough 😕

@sotoslays1890 2 жыл бұрын

do you seal the decal with anything after it sets or does it stay because of the enamel? I'm looking to make these and have no experience but decals are a must for me so I want to make sure I do it right

@lcrushfield 11 ай бұрын

Nice. Where do you get the printable liquor labels from?

@dianatoma2792 2 жыл бұрын

I usually print at fedex because I don’t have a printer. What should I tell them to give me images like that? Should I tell them I need them cut to my dominoes size and use waterslide paper?

@staciewash5335 2 жыл бұрын

How did you print? I know you used a cricut but how did you get the image on the paper?

@thesimbul1 3 жыл бұрын

Great dominoes! How did you use the Cricut. Details please.

@diyhookedoncustomcrafts6901 3 жыл бұрын

Hi Donna Thank you and TFW! I uploaded the an image of an outline of a domino in design space and sized it to 1.7 height and .07 width. Then I uploaded my image in design space and placed it over the domino outline and made sure it fits in the outline evenly and then attach and flatten. Then go to make it... and change the number in the upper left of the screen. Your image will populate the number of times you selected, then print on your printer using the matte photo setting, wait until it is dry and seal with 2-3 coats of sealant. Let me know if this helps!

@plfelay55 3 жыл бұрын

I just ran across your channel. Love what I'm seeing. Can you post where you got your dominoes mold with lid from. Also which waterside brand are you using? Thanks for the video.

@diyhookedoncustomcrafts6901 3 жыл бұрын

Hi Phyllis, thank you very much for your kind comments! I made the mold with MOLD STAR 15 SLOW SILICON purchased from Amazon and the lid is from the plastic container I used to make the mold. The waterslide is EPOCH PAPER brand - white waterslide decal from Amazon as well. I hope this helps!

@plfelay55 3 жыл бұрын

@@diyhookedoncustomcrafts6901 thanks for the info. Continue being blessed.

@diyhookedoncustomcrafts6901 3 жыл бұрын

❤️

@whatsyourwhycoaching6758 3 жыл бұрын

This was amazing! How are you sealing your dominos?

@rosangelarodrigues6865 2 жыл бұрын

Oi aqui no Brasil qual valor devo vender .?em reais aqui

@bibimartinez6479 2 жыл бұрын

how do you create the border around the image for the cricut to cut in squares?

@clutteredgypsie 26 күн бұрын

When you "flatten" the image in design studio it creates the guides for the circuit to follow once printed. Hope that helps!

@valeriejohnson2754 3 жыл бұрын

Hey Denise. Can you tell me how you got the template for the blank dominoe

@diyhookedoncustomcrafts6901 3 жыл бұрын

Hi, TFW. I googled regulation dominos outline and click on images. Hope this helps.

@ZipporahsCrushCosmetics 3 жыл бұрын

So you just use a regular printer for these? I have an HP and really want to try this method 🥰

@diyhookedoncustomcrafts6901 3 жыл бұрын

Hi Shelly, TFW! I used a Cannon P100.

@ZipporahsCrushCosmetics 3 жыл бұрын

Yes I tried this method and it worked so well! Thank you for the tutorial

@diyhookedoncustomcrafts6901 3 жыл бұрын

Wonderful 😊!

@chucklymanone 3 жыл бұрын

What materials do you need to make the stickers?

@diyhookedoncustomcrafts6901 3 жыл бұрын

Hi Chuck thanks for watching. I used Epoch Brand white water slide paper.

@valarierodgers7668 2 жыл бұрын

Did you have to spray seal on the water slide paper before putting in water?

@diyhookedoncustomcrafts6901 2 жыл бұрын

Hi Valarie, yes a couple of coats will work. You should spray/seal after printing. Use light coats. 😊

@valarierodgers7668 3 жыл бұрын

What was the height of the decal size

@diyhookedoncustomcrafts6901 3 жыл бұрын

Hi Valerie, thanks for watching. Height .07 and width 1.7 inches.

@craftychinurse5240 3 жыл бұрын

You here in San Antonio???

@diyhookedoncustomcrafts6901 3 жыл бұрын

Hello I am not in San Antonio at this time.

@paulina2002 3 жыл бұрын

Did u seal ur waterslide after applying and drying?

@diyhookedoncustomcrafts6901 3 жыл бұрын

Hi Vanessa, TFW! No, I sealed the waterslide with 3 coats before I applied them which gave the waterslide a nice thick coat. However it's optional and the waterslide can be sealed again once you place them on your domino. Thank you!

@89mzshine 3 жыл бұрын

@@diyhookedoncustomcrafts6901 If I just buy waterslide paper, put them on my dominoes, and then dome them, do I need to seal the decals before putting them on my dominoes?

@karenpaul4594 3 жыл бұрын

Nice job, but you don't seal your water slides on?

@diyhookedoncustomcrafts6901 3 жыл бұрын

Thank you! I could have but the water slide had a thick layer of sealant, so it didn't require a top coat. But to be on the safe side, I would seal the next time.