DIY How To Install Stone on Your Fireplace Easily

Рет қаралды 1,598,146

6 жыл бұрын

Checkout the fireplace all finished! • Remodeling Your House ...
How To Install Stone On Your Fireplace, and what not to do as well!
#justdoityourself #lovingit #perfecteverytime
► Subscribe NOW and hit the bell to get notified about new videos / homerenovisiondiy
► Subscribe NOW to our 2nd Channel -- Reality Renovision / realityrenovision
Music in this video may be used from Epidemic Sound. Download free copyright songs here: bit.ly/epidemic_sound
----
Shop Jeff’s favourite tools and great products:
► Subscriber discounts on flooring, soundproofing and MORE!!
homerenovisiondiy.com/our-aff...
HomeRenoVisionDIY may earn an affiliate commission if you purchase something through recommended links. #commissionsearned
Need Answers or Advice for your DIY Project?
BECOME A DIY MEMBER NOW!!!
► Get FULL access to me and my team for Q and A’s by exclusive email
► Receive merch discounts dropping SOON!!!
► Participate in monthly LIVE streams for live consulting and Member support!
/ @homerenovisiondiy
WANT TO WATCH MORE VIDEOS??
Watch our most popular videos:
► How to Tile Over Tile
• How To Tile Over Tile
►How to Paint Like a Pro
• DIY How to Paint like ...
Watch our most popular playlists:
►Our Latest Videos • Jeff's Newest Videos
► Drywall Masterclass Playlist
• What You NEED to Know ...
For instant updates check out the links below and FOLLOW me on social media where you can stay up to date on new episodes and what other nonsense is going on in my life
FOLLOW US:
► INSTAGRAM: / homerenovisiondiy
► FACEBOOK: / homerenovisiondiy
► PINTEREST: / homerenovisiondiy
► TWITTER: / renodiy
Produced by: Home Renovision DIY 2020
Video & Editing Services Provided by:
Subdivision Film LTD.
www.SubdivisionFilms.com
Disclaimer:
Videos produced by Home Renovision are provided for informational purposes only. All material provided within this website is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. The DIY instructions used here are used to simply breakdown projects to their simplest steps. Please use a clear mind and use all safety precautions while following the tutorials provided by this site. Home Renovision does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing projects on their homes they are doing it at their own risk and Home Renovision cannot be held liable if they cause any damage to their homes. With different codes around the world and constantly changing standards, regulations and rules, it is the sole responsibility of the viewer to educate themselves on their local requirements before undertaking any sort of project. That being said Home Renovision cannot claim liability with all applicable laws, rules, codes and regulations for a project. Be safe, have fun renovating and ALWAYS stay informed with your local building code.
Royalty Free Music by:
Music: www.purple-planet.com

Пікірлер: 982

@jack8162 4 жыл бұрын

Tip from a stone mason: Alternate your corners when faking them. You overhang off the main wall on one, then overhang off the short wall on the next. It really does make it look a lot better. You don't have to measure how far out they go and then cut them all perfect. Stone isn't meant to be stuck like tile because the edge just looks weird. If you alternate the corners, it is very hard to tell that you didn't use actual corners. Cheers!

@jkarasta1 4 жыл бұрын

Jack I’ve actually seen what your talking about done in other videos. Very good advice! Thanks

@donchiva2222 3 жыл бұрын

I agree. The end result here definitely could be improved, in spite of not doing mitre cuts here. I suppose everyone always has much more to learn at all times.

@frwjbeb25 3 жыл бұрын

How much do you hang it off the corner?

@jack8162 3 жыл бұрын

@@frwjbeb25 what I always do is find 2 rocks that are the same height and both have factory edges, and stick one flush with the corner then over hang the other one to be flush with that one. I hope that makes sense

@jack8162 3 жыл бұрын

@@frwjbeb25 also, your next one after it should be done the opposite way, so that the "joint" it creates is alternating. If you look at it from the front, you should see the joint only every other one. If you get them very close together it blends in well.

@mutchmedia 6 жыл бұрын

Appreciate the non-hollywood-everything-always-works-perfectly honesty in your videos. The problems that occur and how to overcome them; are why we enjoy these videos. So keep doing that please. Thank you.

@HomeRenoVisionDIY 6 жыл бұрын

Thanks Robert. Since we ran into problems we decided to film it , just to keep it real. Not everything goes as planned in this business.

@Newlinjim 5 жыл бұрын

Home RenoVision DIY I 2nd Roberts thoughts. I see everybody bitching about the corners, and understand their point, but since it’s real stone if the stone dust from the cut was removed I think it would be minimally noticeable. Most people don’t notice things anyway and it looks 100% better than before.

@_jolai_ 5 жыл бұрын

Agree 100%

@sabinandmary 5 жыл бұрын

@@HomeRenoVisionDIY As the great modern day philosopher, Mike Tyson once said, "everyone has a plan until you get punched in the face".

@chuckkavigian1045 4 жыл бұрын

I came to the comments to say kudos for leaving that in as well. Too many people watching HGTV thinking everything goes quick and perfect. Thanks for keeping it 💯 👍

@intellisea 5 жыл бұрын

I really like how you try something and when it doesn't work, you admit it was a bad move. Makes me believe all else you have to say. Great job!

@getjoshnow 4 жыл бұрын

Exactly! ... Don't need 6 mins of bad advice

@johnslater4715 6 жыл бұрын

Thank you Jeff and Max. I always enjoy your teaching and instruction. In fact when asked to do some drywall tape and texture for my employer I went you your video "How to drywall A to Z" and then did the work for my boss. He was impressed and thought that I had been doing drywall for many years. Little did he know that I had never done the taping or mudding ever before. I would love to see some instruction from you on texturing. Thank you again John Slater

@HomeRenoVisionDIY 6 жыл бұрын

You my friend are a drywall prodigy!! Hats off to you. Have a great 2018

@deemahdee 4 жыл бұрын

You've motivated me to start to work on my house which we just bought. Thank you for making this home improvement diy stuff a bit more digestible for the laymen. Your an awesome teacher, too. Best wishes from Florida

@hamb7260 2 жыл бұрын

Just a word of advice, spray water on cement boards before installing tiles. Cement boards due to it's nature, absorbs lots of moisture and tiles/stone may not stay long on the surface or crack upon walking on it.

@gregsavchuk3239 5 жыл бұрын

Mr. Thorman, I've watched several of ur YT posts, great work! I appreciate u sharing ur practical / knowledgable approach & professional tips. I'm a DIY'er and your content has helped me do my own fantastic work. Beautiful project, Kind regards.

@zanepetersen9420 3 жыл бұрын

Jeff, I've watched a lot of DIY videos and I always come back to yours. You have THE BEST tricks and common sense most others, don't! Thanks again for this GREAT video!!!

@HomeRenoVisionDIY 3 жыл бұрын

Glad to help

@mikenitzel3808 2 жыл бұрын

Another great video! I'm getting ready to do a project like this for the first time and I feel much more confident in getting a good outcome after watching it! One question--how did you make the cuts around the mantel to match the curvature of the mantel trim? Thanks in advance!

@DadYouNeverHad 4 жыл бұрын

One thing you can do if you're avoiding the mitered corners is to chip the cut edges with a pick/awl to create natural - not smooth cut - edges.

@alansmith2693 4 жыл бұрын

I just bought a portable saw at a thrift store for 25 bucks. Did not know you could use it to cut 45s. Learn something new every day. Of course, that's why I watch your videos. Now if you'll come to Mississippi and help me level my floors/house, That would be fabulous. ;)

@ali87485able 4 жыл бұрын

Just finished mine thank you for the great information.

@femineity 6 жыл бұрын

This is the very first video of yours that I've seen thus far and I really found it to be informative! I loved that the Oops's were left in the video and used as teaching moments (YES!), and the finished product looked very, very cool! Thanks for the video!

@HomeRenoVisionDIY 6 жыл бұрын

Life has a way of throwing curves. we like to show the reality of renovating.

@solshine757 5 жыл бұрын

Your fingers and that saw made me nervous! Thanks for the video

@HomeRenoVisionDIY 5 жыл бұрын

LOl no worries. a little burn at worst maybe!

@mikesbeardeds6462 5 жыл бұрын

You can touch the sides of one of those blades and it won't even hurt. Touching the edges likely won't even break the skin unless you stayed against it. Not like a regular saw blade.

@clearviewmarine 4 жыл бұрын

Mike's Beardeds as long as it doesn’t have a nick in the blade it won’t cut you

@rneustel388 4 жыл бұрын

Isn’t it more like the saw that takes off casts? Those won’t cut you-occasionally sort of a burn.

@83delgado 4 жыл бұрын

The tile blade won't cut you like the angle grinder blade will.

@italiby100 3 жыл бұрын

Wife here looking at videos since husband is about to redo fireplace. We were about to just put the stone on drywall, sent him to go get the cement sheet after this :) very informative, thank you!

@Jetski270 4 жыл бұрын

This guy is awesome and it's just a joy to watch his videos.

@johnmcdonald5998 5 жыл бұрын

Very good finish, and the video was very well done. Little hints such as leaving the spacing for the adhesive helps for those of us who haven't completed this type of project. Thanks!

@charlottetrotter2975 6 жыл бұрын

Thanks for your video, very informative. I looked up how to install for myself because I had a contractor install it and there were many cracks in the stone. He stated this is how it comes and is normal which I find hard to believe. As stated in the end of this video damage stone should be returned, which is what I would think. Also, there were areas where it was not leveled leaving gaps, I have halted the project and now that I watched your video I have knowledge of the right way to install this stone. Thank you so much. I will be showing this to my contractor in the morning.

@emrystyler4562 2 жыл бұрын

Thanks for another clear, helpful, detailed, and fun tutorial. You guys rock!

@rneustel388 4 жыл бұрын

Thanks so much for sharing this project video!! We just bought a house in Arizona, and it has a wood-burning fireplace that has no mantel and what looks like very nice grayish 12” x 12” tiles around the firebox and then a nice hearth. We both really think it needs some stone for definition, and we wanted something we could do together.

@almaramos1560 4 жыл бұрын

Thank you for the video! Would the same technique apply if I wanted to add stone to a wooden kitchen island?

@SandiRose2008 6 жыл бұрын

OMG Max, that room has turned out beautiful. I absolutely love it! And Jeff, it's a good thing you can keep a sense of humor about these things. I know it's not easy sometimes (like this project), but I'm impressed that you can keep smiling through it all. Thanks for another great video guys. Merry Christmas Everyone!!!

@mazzystr 2 жыл бұрын

Every time I have to do a project there you are with expert advice! Thanks for being there!

@mikhailpoddyachiy5406 3 жыл бұрын

Thank you so much for your honesty now I don't have to learn on my own mistakes I wish we have more channels like yours

@scorpion068 3 жыл бұрын

That was the most micky mouse wet tile saw ive ever seen. I was looking for a Little Tikes logo on it somewhere 😂

@xworkerbee 3 жыл бұрын

If you do not want to go thru the hassle of mixing thin set mortar, you can buy a quality pre-mixed acrylic mortar designed for stone installations. It comes in small and big buckets and you can move at your own pace without worrying about the thinset setting up on you.

@emirumpf9947 9 ай бұрын

Stove arrived in great shape, no damage during shipping. Easy to assemble. Works great, we are very happy with the way it heats.

@zoeinvestor 4 жыл бұрын

Your content is the absolute best! Leagues above and beyond other construction vids!! Thanks!

@lukei6255 4 жыл бұрын

Haha. Thanks for your.advice regardng a spouse! Love your.sense of humour.

@lightwavz 5 жыл бұрын

I loved the honest frustrations with the saw. It was so worth not editing out. I keep thinking I want to tackle projects like this for our house, but I am a worst case scenario type DIYer. I need to how to get myself out of the jams I find myself in! Keep the content coming and I will keep watching and recommending. Also, fun to actually see Max in the video!

@fryesmoving3451 4 жыл бұрын

I think I've watched everyone of your video's and I don't even have a fireplace ! Appreciate your advise on my shower tile project it came out great for a DIY !

@freeheeler09 Жыл бұрын

I really like how you guys tried the mitre and kept the fail in the video! Thanks for that! We all try things that don't work. The kicker is how well we recover and go on! And, great advice RE consulting with your spouse or client before slapping the stuff on the wall.

@moethe1488 5 жыл бұрын

Great Video. Want to know if you removed the old brick or did you just place the cement panel over the old brick. Thanks.

@HomeRenoVisionDIY 5 жыл бұрын

you could. in this case it was all drywall.

@janeandrews9531 3 жыл бұрын

@@HomeRenoVisionDIY Can't the tile just go over the brick? How would someone even begin to remove bricks? Sounds like an impossible task for a DIYer.

@davidchase9034 3 жыл бұрын

As a stone mason this made me cry 😢 so many things done wrong

@_pjd 3 жыл бұрын

Can you elaborate?

@RandyReeseEA 6 жыл бұрын

Love your video's Jeff! I've watched most of them and have used your instruction in my home renovations! Keep up the good work!

@HomeRenoVisionDIY 6 жыл бұрын

Glad to help Randy, Cheers!

@johnnyv5995 3 жыл бұрын

Looks great! Appreciate the 'lessons learned', hope it is holding up well

@simpleliving-bulgaria4787 5 жыл бұрын

Love seeing the trial and error. I don't feel so daft :-)

@HomeRenoVisionDIY 5 жыл бұрын

Life is like a box of chocolates....Cheers!

@lesfreud3167 5 жыл бұрын

Hi, I’m about to install natural stone on a fireplace wall. I watched your video and plan to use the same tile and follow your advice not to miter the corners. I’m wondering how you dealt with the unfinished edges. Thanks Les

@melindaleon5907 9 ай бұрын

It is so beautiful, has different modes and colors and flame speed. I bought a 42 inch for my 55inch tv and it sure came out well

@alec1113 11 ай бұрын

My five cents , it best to to hydrate the backer board ( wipe with damp sponge ) do the same with ledger stone , this will give you more time with the mortar/ thinset as the materials if dry will suck out the moisture. Second , permanent marker can sometime migrate to the front of the stone if you are using a softer stone ,for example marble etc , it may to a few weeks but eventually it can come through and leave black lines on the surface , ive seen it happen . All the best

@brianwoodruff2736 3 жыл бұрын

Horizontal/vertical notch lines do matter. Their purpose is to evenly dry the thinset. You want them perpendicular to the tile. These pieces are nearly square, so it doesn’t matter as much, but technically they are wider than they are tall and notch lines should be vertical to provide better air flow to the thinset. Get the proper amount of thinset in quick. It starts curing right away and you don’t want to keep adding mortar as you mix. MOST IMPORTANTLY: you need to let your mix slake. After getting your mix to the right consistency, you need to let it sit for a couple minutes, the. Mix again. Otherwise it starts drying to fast and gets a crust on the outer layer as you spread. You either end up re mixing several times throughout the install and only being able to spread small amounts at a time(if you’re aware this is happening) Otherwise, you’re sticking tile on that appears to be bonding to the substrate but will actually be breaking loose from the mortar as it dries. Always pull some pieces out randomly as you’re working to make sure you have a good bond and coverage. Dang! Good luck homeowners...

@neomacchio4692 11 ай бұрын

Shouldn’t the tile be slid back and forth (90 degrees to the trowel lines) while pressing it into the thinset? This collapses the ridges, and allows the air to squeeze out, providing MAX coverage. I’ve never seen anyone explain this vital aspect. WHY A TROWEL IS USED. The trowel creates peaks and valleys. Without this, there would be air pockets galore. The trowel allows for 90-100% coverage and no air bubbles behind the tile. This isn’t as important on a wall. It’s very important on a floor. If there are air pockets in a floor, if someone drops a hair dryer, a pot/pan etc on the floor, the tile WILL break… revealing the air pocket.

@AMATEURDECORATINGLIKEAPRO 3 жыл бұрын

Hi! I want to tile-over-tile my fireplace. The new tiles are not heavy. Would you recommend that? I sure hope so.

@chrisp7622 3 жыл бұрын

You should really remove it. It won’t bond well even with a primer. And you don’t want anything falling off the wall it could be dangerous

@RoadKen53 3 жыл бұрын

Your user name tells it all. Use cement board or you'll have problems.

@Mr13tsmith Жыл бұрын

I work at Lowe's and I had this question yesterday.. Sure enough my guy Jeff had a video on it! Learned a lot thank you now I can answer these questions without an issue. I think that those edges look good even though you didn't have the corner pieces!

@jordanl5341 6 жыл бұрын

I have that same QEP saw. It's slow even with ceramic tiles. But worth it for small home stuff. Great vid! Love how you show the fails along the way

@clintonbubb3187 6 жыл бұрын

Great job as always Jeff.... you've got a unique presentation style that is both informative and friendly. I especially thought the "pivot" (and the explanation) that you made with the miter vs. straight cut was great. That type of dynamic change is what separates good DIY from failures. Happy Holiday wishes to you and your family!

@HomeRenoVisionDIY 6 жыл бұрын

Thanks Clinton, Just trying to keep it real. Have a great 2018!

@clemsontigz1 3 жыл бұрын

Angle grinder works wonders for this process . Heeeeelllluva alot faster as well .. And I'm sure its been beat to death but ? Wear ya some safety glasses 😉

@pdubs7069 5 жыл бұрын

I already liked(up thumbed) this video before i even watched it! That's total confidence in my favorite Canadian!

@HomeRenoVisionDIY 5 жыл бұрын

Cheers for that!

@joeshmoe8912 6 жыл бұрын

That looks great. I love working with that kind of stone. It makes the room!

@HomeRenoVisionDIY 6 жыл бұрын

Thanks Joe. It was a shame it wasn't available with corners. It would have made the work much easier. There are a ton of faux stone options that do have them.

@kencoumou3166 5 жыл бұрын

And I was all ready to buy that saw. Sheesh!

@HomeRenoVisionDIY 5 жыл бұрын

I would suggest a little larger motor size!

@MrHarleyhogger 5 жыл бұрын

40 yr stone mason here. If you didn't have the corner stones You should have at least staggered the corners to break up the straight joint. You never want to see a straight vertical joint or sawed edges .. Surely they sell corner stones. I know they are expensive but you just gotta have them. The difference is night and day . But great video

@Durfenhurf 5 жыл бұрын

I have this exact stone and I can tell you, they certainly do sell corner pieces for it (it's Trevi Gray at Home Depot). If you see this, maybe you could let me know if I am okay putting this stone directly over brick using heavy tile / natural stone mortar. Three different folks at HD said "oh yeah, no problem" but a 40 yr stone mason would boost my confidence immensely.

@jasonrutherford1722 5 жыл бұрын

you beat me to the comment this guy does alott of stuff and he does alott of nice work none of us are perfect but you are 100% correct on thoughs corners

@picklemetimbers3003 5 жыл бұрын

I currently have a client who wants this stone on the face of their fireplace. I told them they should do all 3 sides with the corner stones for the best professional appearance They are still pressing only the face of the wall due to cost.. If anyone decides to use this product don't be cheap. The appearance of the finished product will be night and day. 10+ year stone mason and business owner.

@ReaganPatriot 5 жыл бұрын

Pickle MeTimbers planning on doing this on my fireplace...and I will get the Conner for sure... I have dry wall now, do you install the cement wall on top of the dry wall?.. right?

@TheAcenightcreeper 4 жыл бұрын

My stone mason actually mitered the corners into 45’s and it looks great, you cannot even tell. They dont sell corners for those mosaic stone pieces, please send me a link for non-mosaic travertine stone corners... so folks end up with straight and exposed edges. The equivalent of running cut tile to the edge and not putting a bullnose or edging piece in. Then you have the cheap folks who only want to do one wall...it wasn’t even a question for me, not only did i do the wood stove wall, I had him do the entire connecting wall to make it look like one solid stone wall that went into the ceiling and I had him wrap the stone around the behind the wall where it was exposed to the other room to make it appear solid. I don’t get why he abandoned the 45 simply because it took a while...unless the homeowners did not want to pay. it honestly is the correct way to go for real stone...my fireplace is real travertine stone, my mason did all 45’s in the edges and it blends seamlessly. I get nothing but compliments on my wood stove stone work. It cost me 7k to do about 250sq/ft in labor and stone, but its done right. I am a believer that if you cannot afford to do it 100% correct, no shortcuts with the best material then you shouldn’t do it at all. Everything else is just a compromise, so why not save up until you can afford the right way? Those mosaic stone pieces are a real garbage product meant for DIY flip reno’s. They look good from far, but are far from good. If anyone wants to do this, go to a stone supply store and get a quote on non-mosaic stones, get a stone mason who will custom cut everything on site for the project.

@CandleClimber 2 жыл бұрын

good video. Admitting the saw was junk is hilarious. Suggesting doing this project while the misses' is away for the weekend is gold! Having the pro come in at the end is brilliant!

@BassMent70 2 жыл бұрын

Thanks for showing the "mistakes" and how you overcame them, great for the DIY person.

@banzayalex 5 жыл бұрын

What if the wall is already painted? Would I need to remove the paint?

@jasonmontes9346 3 жыл бұрын

I'm looking into doing my fireplace, it is currently brick, would that cement stick straight to the brick or would i need to remove it and start from scratch. Thanks

@alanheadrick7997 3 жыл бұрын

I'm thinking the same thing. People tile on top of floor tile.

@Oceanusnovas-um2zf 4 жыл бұрын

First time watching new subscriber. I love the outcome. I always wanted to add this to my living area I have a dead wall 8x 5.3. As a female I will take my time and follow your video it will save me hundreds on this project. That's a lot.

@EPICYELLOWHORSE 5 жыл бұрын

It looks totally AWESOME!!! 😎👍

@bobloblaw7465 5 жыл бұрын

I would definitely butter the stones before just placing them on the wall. Thats how you have pieces fall out. Not enough adhesion.

@supremeXorio 6 жыл бұрын

Helped me save 3 grand thanx lol this video was dope

@HomeRenoVisionDIY 6 жыл бұрын

That is what I like to hear!

@johnlawrence3134 6 жыл бұрын

p orio fh f fire call IRS guitars guitars

@mitchellpurelife 5 жыл бұрын

Loved the video. Thanks for all the details, materials, tools, technique, etc. Also as another sub said, thanks for keeping it real. The job looked like a million bucks!

@robertdrake8941 5 жыл бұрын

Hey buy a cut off saw and put a diamond blade it works alot faster and safer

@apple-guy9394 4 жыл бұрын

Looks beautiful 👍🏻👍🏻

@cliffrichmond7426 6 жыл бұрын

If you put a segmented blade on those cheap saws they cut much faster and cleaner 45s

@HomeRenoVisionDIY 6 жыл бұрын

A better blade would have made a huge difference. This video was shot like a reality show. We filmed it from the homeowners perspective to show the kind of problems you can run into.

@DaManDaMythDaLegnd 4 жыл бұрын

"Just about perfect!"...dumps in another 1/4 bag of powder..

@triple7441 4 жыл бұрын

DaManDaMythDaLegnd 🤣😆😆

@dwayneholbrook4056 4 жыл бұрын

I would have put something down on the porch where I was mixing

@qwertyfy8014 3 жыл бұрын

😂

@kyleturner6965 6 жыл бұрын

Great video. Had the same saw and was waiting to see it under perform. Awsome that you were honest

@nadkram1 6 жыл бұрын

Wow... perfect timing to see this. I was about to start the same project here... good info thanks!

@HomeRenoVisionDIY 6 жыл бұрын

If you get a proper blade things will run much smoother. Cheers!

@dorthleybeauval705 6 жыл бұрын

You guys should put everything you used in the video down in the description box so we know what we need or where we can get them!

@HomeRenoVisionDIY 6 жыл бұрын

Thanks for the idea Dorthley, unfortunately I don't promote products or stores at this time unless I am asked to specifically. If you have any questions feel free to ask we answer every comment.

@eronbumen7827 6 жыл бұрын

What brand of stone is this?

@mr_handsome2you 4 жыл бұрын

Home depot stone Floor and decor ultra bomd or home depot tile saw

@hmg8915 5 жыл бұрын

Mason here: Sorry i had to laugh because its always kinda funny to see a tile guy work with real stone. Its a different ball game. nice video, great info

@neocount6397 5 жыл бұрын

Any recommendations?

@zteaxon7787 5 жыл бұрын

@@neocount6397 Git gud?

@robertdrake8941 5 жыл бұрын

Amen to the Mason guy .I'm Mason guy to lmao

@warpspeed9877 5 жыл бұрын

A fireplace between two big windows! Superb job and final presentation! Enjoy!

@HomeRenoVisionDIY 5 жыл бұрын

that room looks awesome!

@jimserhant7741 Ай бұрын

I’m a QEP fan of their non powered tile setting supplies only. I recently completed a stacked ledger stone backsplash, a Ridgid 6.5Amp 7” table top wet saw & Dewalt diamond blade cut through the stone like butter.

@1xraydoc 6 жыл бұрын

I would just buy product with with corner pieces unless you're absolutely in love with that stone.....but they make a ton of products in many styles with corner pieces now days....way...way easier.

@HomeRenoVisionDIY 6 жыл бұрын

Totally agree. But this one was on a huge sale. I wonder why?

@loraletsgetcracking6089 6 жыл бұрын

Because of the price on the stone lmao

@armangharibian6633 5 жыл бұрын

1xraydoc day you

@MrGawn 5 жыл бұрын

i would like to have seen the process of hanging the cement board. maybe there is some b roll of that laying around that you can post..

@HomeRenoVisionDIY 5 жыл бұрын

cut and screw my friend. no secrets there. Cheers!

@luisoremiadelrio8227 5 жыл бұрын

Thank you, very helpful!!

@dlubura 5 жыл бұрын

Great Job , Thank you for tips on the end !!

@warnerrobins8542 4 жыл бұрын

This is the first video of yours that I've watched that made me wonder. Was the guy who played the handyman a actor?

@metalphobos3632 6 жыл бұрын

That little saw was scaring me....

@HomeRenoVisionDIY 6 жыл бұрын

Just taking a look into the real life of a homeowner! There are definitely better options out there but they all cost more money!

@jasonb.9953 6 жыл бұрын

Another great job Jeff!! When I did my kitchen island I ran into the same problem with the 45’s! So after I cut that straight edge I took a small hammer a just chipped at the end to give it the same look as the face. It took more time, but it was worth it!! Hope you have a Merry Christmas and Happy New Year!!

@HomeRenoVisionDIY 6 жыл бұрын

Thanks Jason, it doesn't always work out the first time. Being handy means being able to improvise and adapt. Have a great new year as well. Cheers to 2018

@carlospinzon9842 Жыл бұрын

Bud I love you channel, I been watching for year and it has help me with some many projects, and it's make me look like a pro to my wife (no tell her 🤫)

@smartyardhouston 4 жыл бұрын

"Its almost perfect"...adds like 3 times more mortar...😂...mixing on a wood deck without protecting?...

@pitbullgamer8116 4 жыл бұрын

This dude doesn't know how to install this brick

@turrimuguz6101 3 жыл бұрын

Totally agree. This dude should stick to just talking and maybe take some deep breath’s cause he is running out of breath by second row. No protection on flooring, no protection on deck, doesn’t even know how to mix the thinset. Has no level, knows nothing about this type of work...

@dondonaldson1684 5 жыл бұрын

Did you try to use a cold chisel to make the end cuts? Perhaps a fractured stone edge would look a lot better than the cut off a tile saw? Jeff, great tips otherwise, but please go to Ottawa Fastener and buy a few $6 pairs of safety glasses and flip them onto your forehead when you aren't cutting. Not trying to be a safety troll, just want to be able to see more videos while you can still see to make them!

@HomeRenoVisionDIY 5 жыл бұрын

Thanks Don, I have them and use them regularly when needed.

@diggler306 6 жыл бұрын

Final product looks great, and best of all, it's done!

@HomeRenoVisionDIY 6 жыл бұрын

Thanks Josh. Max really bit off a big chunk with that stone. I am glad it turned out so well and the finished room was worth all the hard work.

@chrispearl1473 Жыл бұрын

Thanks for being super honest with the saw commentary. I'm going to be doing a stone fireplace wall unit soon and will probably buy a saw as opposed to renting it due to the cost of renting vs buying, then maybe resell the saw for 50% off or something. I wanted to miter the corners, but that looks like that may be a problem for two reasons. You showed one with the rental saw and two, I may not even have a perfect 90 degree angle which would pose a problem. We have a brand new builder spec house and Ryan homes took a dump when it came to building it nicely. It's a builder spec home for sure, but ain't nothing perfect or clean. Thanks for the great video, I will remember the words of wisdom.

@CampingDad247 5 жыл бұрын

DIY ... STEP 1: hire someone STEP 2: Grab a beer and enjoy!

@EinsteinTeachedYou 5 жыл бұрын

Almost perfect..adds a shit ton of powder..🤣

@muttBunch 4 жыл бұрын

I’ve seen this before. Jeff is definitely good at this. I have an 8’x6’ tall putrid old red brick fireplace with a cheap gas insert the original homeowner did. Currently remodeling and getting out of here but I’m wondering if I should just prime it and do hardibacker then faux stone but trying to keep it cheap but look attractive

@johnnylarue6016 4 жыл бұрын

First off, I really like and appreciate the work you put into these videos, guys. They help give me confidence and support my own projects. Secondly - Go and rent the saw and mitre the joint. Yes, it's three time the cuts, but the saw is designed to do the work and the results are so much better. My brother and i did his gas fireplace in a day. I have one of those small saws and they're not designed for this material....just sayin'.

@annzel7557 4 жыл бұрын

Seeing cement tripping and flying everywhere gave me anxiety

@mmconstructionlandscaping2275 3 жыл бұрын

Yeah same here

@mathieusan 6 жыл бұрын

Where are your eye protections bud?

@truckingoover Жыл бұрын

Thank you struggling through a hearth because I can’t lock down a mason This just answered all my questions

@miami312 4 жыл бұрын

Very good video, thanks guys! I would have cut the 45 angle and finished with a diamond wheel on a hand grinder. The extra work would have been worth the look.

@jaimemadrigal4166 6 жыл бұрын

I watch all the videos and after I watch each, it makes me want to go start a new project around the house.

@HomeRenoVisionDIY 6 жыл бұрын

I have the same problem. Max has been working a lot on his new house and I am getting the itch to start a few at my house as well.

@billpoynter108 3 жыл бұрын

Great video. You answered everything I was not sure about.

@vee8599 2 жыл бұрын

Coming from Instagram great video

@shiranshapiro2849 4 жыл бұрын

Hi Jeff, thank you for this video. Is it possible to install the sheet rock on the top of a drywall. Attached to the 2x4s? We are trying to avoid cutting the drywall.

@day2daydiy124 4 жыл бұрын

Love the detailed description

@James-zi9wo 5 жыл бұрын

Great instructional video!

@zg6045 8 ай бұрын

That is amazing! Thanks and also you have not only skills but also great humour

@mrchris123gmail 4 жыл бұрын

Fantastic video. Just about to do this with a quartzite type stone. The fact that you leave in all the mistakes and learning curves really helps. Top job 👍👍👍

@DaNiBu10 3 жыл бұрын

Looks great! Would you recommend removing rhe old brick or to install a cement panel on top? Thanks

@JOHNECOYNE 3 жыл бұрын

love your delivery and topics! Very

@jesusistheonlysavior3312 6 жыл бұрын

Your eye healed really well. All the best .

@HomeRenoVisionDIY 6 жыл бұрын

Funny how big a mess a little bump to the top right of the eye can make.

@4philipp 3 жыл бұрын

That’s some nice looking stone work around that fireplace. I think I would want to put some wooden trim around the corners, eliminating the need to play puzzle.