DIY: How to Make Zipper Spline Box Joints
Рет қаралды 1,272
3 ай бұрынIn this video I show you how to easily make zipper spline joints for your box corners. A great, easy woodworking DIY project to make your wood projects look amazing.
Other neat joints for your working projects:
X joints: • An EASY Way to Make X ...
spline joints: • Ridiculously EASY Jig ...
skeleton joints: • DIY: How to Make Skele...
@industrialcomfort
www.industrialcomfort.com
@pathardage1880 3 ай бұрын
clever process. thank you.
@industrialcomfort 3 ай бұрын
Thank you, Pat, and appreciate you watching!
@courtneycox8265 3 ай бұрын
I like the look of your zipper splines and understand they are purely decorative adding no strength. However, it should be possible to angle and cut every other spline hiding the kerf on the inside of the joint to get the zipper look and add strength. Have you thought about a technique to do that?
@industrialcomfort 3 ай бұрын
Hi Cortney- do you mean adding more of a chevron-type look?
@courtneycox8265 3 ай бұрын
I was thinking to keep the same zipper look but using a jig, the cut could be made to raise or angle the board behind so the kerf looks the same on the front board but only cuts into a portion of the back board. When the joint is assembled the tenon would show in the front and then angle back into the board on the other side such that none of the kerf or tenon shows on the opposite side. If a jig could be figured out the hold the boards to make the right cuts then you’d not offset the boards cutting through the front board but angled into the back board.
@industrialcomfort 3 ай бұрын
@@courtneycox8265If I am following you correctly I am not sure that would work, simply because of the size and arc of the blade.
Proper DIY
Рет қаралды 335 М.
Poly Holy Yow Spanish
Рет қаралды 27 МЛН
WillWood - Diy & woodworking
Рет қаралды 1,2 МЛН
Inventor SC
Рет қаралды 11 М.
GameChanger Amor
Рет қаралды 10 МЛН
Nahuelinho RU
Рет қаралды 7 МЛН
BECHEEKHA
Рет қаралды 13 МЛН
Smart Rakesh
Рет қаралды 10 МЛН