I’m 16 and I’m tryna surprise my mom for her birthday so I’m going to spend about 600 dollars to remodel her room, and the family room too. This video helps me a lot with the wood trim thank you so much . 🥰

This was helpful, just painted all my red oak trim white and got some great tips. I used crud cutter to clean off all the build up and a scraper to get the crud off. Used a primer from valspar made for trim and cabinets. Sanded them with 220 sander before the primer. Did have some bleed through from the tannins in the wood, so tried a few different primers with the same issue but the valspar one went on more smoothly so went back to that. Used Sherman Williams emerald enamel based trim and cabinet paint and that stopped all the bleed through problems. The only thing I would suggest is a 2” roller. Made the priming and painting go on so quickly and smoothly. Thanks for taking the time to make it video. It’s very helpful for learning the right way to paint wood trim!

✋🏼👊🏼😀❤️ So much fun. I always paint the trim white as well. Thank you for the the reminder about water and vinegar for the prep. Namaste 🙏 ☮️

The finished result is fantastic! x

I just purchased the house w exact same wood trim and windows. I’m going to follow your steps to paint them white. Thank you.

Fantastic work! I love it!

Great job! I always dread painting trim. 😬 Looks like you've got it figured out! 👍

I’m going to save this video so I can’t come back to it later when I need it! Thank You☺️

Such a useful tutorial, an really transform a space!

Thank you so much for making this video. I have been looking for one exactly like this. I bought an older home it has the stained trim and I’ve been wondering how I could paint it why so now I know it’s awesome video. Thank you again for making yet and sharing it with all of us you did a great job

Really nice finish. Enjoyed the transformation

I think the paints meant specifically for trim may cover and wear a bit better. I'm about to start all my word work as well, so I appreciate the "how to". I'm watching many video's and picking up good portions of the process from all. Your trim looks great, and you're a saint to do it over in each of your new homes! What a trooper!

Oh, I hate sanding so much, but yes, it is necessary. Very good tips. Looking good.

Thank you AliciaLynn. My early 80's built 2 bedroom condo is very dated "late 70's" dark stained trim and windows in all the rooms. Gonna spend the time and paint all semi gloss white. Then painting the walls a light grayish tone. This will update the look of my condo especially with the new matching living room furniture. Every room, ceiling, walls and dark stained wood trim is getting painted. Way to dated and sick of it.

Subscribed just because this video helped me a lot.

Great job! If the wood trim was raw and new with no stain, nothing, would you sand it still and still use primer or would you go straight to paint with primer on fresh bare wood trim? Thank you in advance!

Great tutorial...thank you!!!👍

You may not be a professional Painter, but man you got some talent 👏👏

It looks awesome!! Thank you! There's so much trim to do in a single room (base board, doors, window trim, etc...)

Do you put tape over your newly painted trim before painting the walls, or do you just carefully cut in as close to the trim as possible with a precision angled brush? Thanks for the vid. B.T.W it taught me a lot for how to prepare the wooden trim for painting my rental property to keep me occupied while in covid lockdown. I'm off to do some sanding in readiness for the primer now.......

Awesome job. I have alot of varnished wood to paint. I was told sand it down with 150 grit sandpaper and pretty much do what you did. What grit do you use

That turned out beautifully!! Thanks for sharing!! All of mine are raw cedar wood...I don’t think I’ll be able to change them without just ripping them out and putting in new ones. Yours look gorgeous!!

In the process of purchasing my first house - my wife and I said this was the major thing we wanted to redo - paint the walls & repaint the wooden trim to white. How is this method still holding up? :) Any issues? Thanks for the tips!

Very nice!! Do you think the same process would work for trim, door s that have the wax like coating on it? Like what is found in mobile homes.

They sell non-sanding primers that you can use without sanding. I've been told they work well.

Turned out really well,, Is it true that if you use latex paint on doors & jambs that the doors will stick versus oil based is not suppose to?

Do you have to apply a primer first or can you get a paint that has primer in it?

Could you use steel wool instead of a sanding block/sandpaper? I would think that may be easier to get into those groves.

I hate painting but in the middle of a project that includes existing nice stained oak trim, I want to paint it white but hesitant about the prep work involved .. I think I would sand first with maybe with steel wool to rough the surface then clean with the cleaner. I think white trim makes the wall paint pop out ...

You’re supposed to sand each coat of primer to remove the streaks created by your brush.

I'm attempting to paint an older wood trim that I'm not too sure if it's got stain or not but it's your typical wood trim in like every older sort of cheaply made home..dark dark, I hate it, but it doesn't really have any shine to it, thinking that since it's so old, the stain or varnish is just worn off.. so idk, I think I'm going to be sanding it regardless just to make sure cus I don't want to have to do all this prep crap again, jusy clearing out the room and area was a two day process, so this is getting done right the first time so it's the only time,lol. I'm wondering if there's any chance I can get away with not using a primer? Or if there's a cheap primer,idk, I'm already using handy down paint from a friend's remodeling job, and I don't have any money to buy anything new or more of, but I've got a lot of white paint.. I'm mixing it with a little black to try and get it to cover better, but it's srill extremely white, can't tell at all I added black to it, but ide heard it helps the white paint have better coverage. Idk. I'm thinking the primer is kind of a necessary step with covering this dark wood trim,I really wish it wasn't,idk how I'm going ti get a primer, I've asked everyone I know of they have any extra or left overs primer paint and no one has it. Going ti check a little store we have here in my town that's like a donation based household goods hardware thrift store, has all sorts of paints, but I am hoping they have a gallon or even half gallon of a primer for under 5 bucks cus that's really all I'm able ti scrounge up at this moment.

Do you need to do primer if you are painting over white? Trying to paint our trim light blue

I did all of these steps, but somehow got yellow streaks through my white paint. Rather frustrating to spend so much time prepping, only to have to do it again. Any tips?

We are about to paint our wood trim black should I still sand it down?

I would advise sanding in between each layer of primer and paint; starting from rougher grit to finer grit with each coat. If covering dark colors, 3 coats of primer with 80-120-180 grit, then 2 coats of paint with 220 grit after first coat. That would really work well imo. Thank you for the video :)

Great video! Did you wash off/rinse the Spray 9 after using it?

Wonderful video dear friend.thank you for sharing

How did the paint dry? I was looking for tutorials on how to paint trim streak free. The close up shot had a lot of streaks. Is it possible to paint trim without streaks??

How long would u say it takes you from start to finish for that size frame? Thx

Do you think I can use a paint with primer in it? to skip a step?

Which do you paint first, the walls or the trim?

What grit of sand paper did you use?

How did you remove the primer & paint from the wall??

I just had a faboo idea. Come home and help me paint the Taj Mahal! Happy Valentine's day to the top B!

This is right up my alley! Loved this!!! Dropping by to show some love! I’d love it if we could support one another!❤️

How long did it take to do that 1 room?

Great job! I have a lot of trim to do. Have you ever tried a deglosser?

We just did our bedroom. We used 00 steel wool and a shop vac to prep the wood. We had lots of gaps between the walls and the trim so we had to caulk. We used Bull’s Eye 123 primer and Behr Ultra White Semi Gloss paint.

You doing a good job but you will find it much easier to use a course steel wool which is normally available from your hardware store, just make sure you wipe all the wool fragments that you certainly do not want on your finish as they can create small little rust spots, stainless steel wool may be safer if you want. A paint company tech once told me to just use a course 3M kitchen scourer, their usually green and nylon, you only have to cause scratching on the old surface to create a key for the new paint or varnish.

If we wait for men to paint we will die first...good for you...👍🏻

Thank you! We are renovating our place with just paint, right now. Yellow-orange oak is everywhere. 🤢 Go Cougs!!

Hello You use oil ir water base primer???

What if you don’t have stain on tour trim and it’s just wood

Would oven degreaser work the same ? 😅

Der kha video f🎽🎿⛷🏌️‍♂️🏒🏏🎯🏸🏓🏓🏀🏀⚾️⚾️⚽️⚽️🏀🏏🥋🎽

I thought we could use a primer without sanding.

I like white painted interior trim. My house has stained interior trim and white painted doors. But I’m not sure if white painted interior trim will look right on my house. Or maybe I’m afraid that I can’t produce a professional looking job. When my house was being built 25 years ago, one guy painted all of the 6 panel interior doors. He used a brush and how he didn’t leave a single brush stroke I’ll never know.

If you primed it with two coats, then why 3 coats of paint afterwards?

They sell paint with primer...you probably could have save time, but it did come out very nice👍

How "tall" are the walls?

It looks so great!! I was wondering if maybe your husband could hold the vacuum close to you while you sand 😂. Probably would take a lot of electricity though. The white gives it a nice pop! Looking forward to seeing more of your progress here!

Recently used a Kilz primer and was very unimpressed, even after 2 coats on a light color. There must be a better product out there... ??

Great video. Don't waste any more time cleaning anything,,,,,,, that your just going to sand🤔 That blew my mind, lol. But l swear, great video, great job. You'll save so much time⏳ Edit: And try a 4 inch, roller too, so much time will be saved👍

Very solid video...why did you do 3 instead of 2 coats of white paint?

I've gotta go ahead with the white vinager amd water

Can you use a paint with primer?

Why spray 9 it prior to sanding? Shouldn’t you do that after sanding, prior to paint?

I guess sanding is the least favorite part for everyone; I can't blame you, because I hate it too. However, I am a perfectionist, so I feel the need to sand very well and boy is it time consuming and messy. The hard part for me is to start; once I start, there is no stopping me 😂

Awesome video! (except the WAZZU shirt lol)

Do you prep? Do you wash the doors? Do you sand the doors? What paint is that?

buy or use a fan, you can coat even and no runs..use ceiling fan and other air mover. Doors and trim dont take much paint, it has to dry to color.

Why do we use primer on wood? What happens if we don't use it

Nice floors, lady

Trim first and use STIX its a primer that is white in color and averything sticks like cement …wallpaper ect…afterwoods..u still need to wallpaper glue bue stix is pemo stiff

song at 3:18 slaps

You should have used a degreaser after sanding to clean the trim and let dry before painting.

Use liquid sandpaper

Watch how many coats you put on cuz it adds thickness to the surface. Doing doors and jambs almost always changes how door closes.... 😁

We are doing this in our house and it's a long process. It is very much worth it because it looks so much better! I have been using a deglosser, so I don't have to sand. I started with sanding and it was messy. A friend told me she did her house without sanding and only using a deglosser.

salvage wood stained wood if ever possible. Use gel stain to darken but never paint over.

You can't always use whatever primer you want? Definitely use oil base primer. Less coats of paint

Two coats of primer is unnecessary. One coat of primer is sufficient. Also, you need to mention to the viewers the sheen of the trim paint used, which I assume you used semi-gloss paint (very important to mention).

Go Cougs!!

Go COUGS!

Go Cougs!

Looks like cheap pvc molding now...

😡😡😡😡😡...🥺....😡😡😡😡😡😡😡😡😡😡😡😡😡😡😡

👎👎👎👎👎👎👎🤮

Shameful to paint real wood sigh, no craftsmanship anymore :(

I hate the wooden trimming 😭 So ugly

awful..never paint real wood. tacky and distastful. Paint has a cheap ugly look jmo

Why did you ruin that wood omg? It can never be realistically undone and it's something people started doing because it's cheap and easy not good looking.

Too bad the paint is going to start to peel in less than a year. You have to sand the trim. Please don’t follow this lady’s instructions.

Emerald urethane trim paint from SW is the best .