DIY: How to Print Double sided Business Cards with Cricut ! Hack !! Part 2

  Рет қаралды 93,329

Silly Crafting

Silly Crafting

2 жыл бұрын

Hello everyone!
Thank you for clicking on my video. Hope it helps u guys !
Please Subscribe, Comment, like, and share !
How to Design Business Cards: • DIY: How to Design You...
Facebook: / sillycrafting
Tiktok: www.tiktok.com/@sillycrafting...
Instagram: / sillycrafting_
Etsy shop: sillycrafting101.etsy.com
Amazon Storefront: www.amazon.com/shop/sillycraf...
Websites used : Canva.com
Materials Used:
- Cricut Design Space
- Cricut Explore air 2: amzn.to/3ljhIOw
- HP ENVY 6055 Wireless All-in-One Printer: amzn.to/3Je2Aj7
-White 80lb, 8.5” x 11” Cardstock Paper, 216gsm, 250 Sheets: amzn.to/3IfUEuI
Music: Sweet
Musician: LiQWYD
URL: / liqwyd
* I only recommend products I have used myself and all opinions expressed here are my own. These links are affiliate links that at no additional cost to you, may earn me a small commission. Thank you so much for the support!

Пікірлер: 169
@lmichelle8480
@lmichelle8480 2 жыл бұрын
That little hack for printing the second side is EXACTLY what I needed. Thank you!!
@valariegarcia1266
@valariegarcia1266 Жыл бұрын
I started a new bath and beauty business. It is so stressful teaching yourself how to do everything. If it weren't for people like you to teach others so they don't have to spend so much time learning by mistake, I would have already stopped. Thank you so much for sharing. I went through the steps as you were teaching them and it was perfect. Thank you again!!!
@savannah6378
@savannah6378 Жыл бұрын
What printer are you using? For some reason I keep doing everything correctly but it still prints a inch off
@valariegarcia1266
@valariegarcia1266 Жыл бұрын
@@savannah6378 Older model HP Officejet Pro 6830.
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
You got this!
@vasilahodjaeva8522
@vasilahodjaeva8522 6 ай бұрын
​@@savannah6378 ох у меня та же проблема
@lysandramoreno2101
@lysandramoreno2101 5 ай бұрын
Mind blown 🤯 I’ve been printing two different pages and gluing them together for a few years, if only I had seen this video sooner!! Such a clever idea!!
@SillyCrafting101
@SillyCrafting101 5 ай бұрын
Glad I could help !
@imakepartydecorsparkle
@imakepartydecorsparkle 2 жыл бұрын
Thank you so much for this video. I do not usually do business cards, but my daughter asked me for some. With your helpful video (part 1 & 2), I was successful. Thank you again!
@CarmelFan2024
@CarmelFan2024 2 жыл бұрын
Brilliant! I had no idea I could do this with my cricut. Thanks a ton.
@ashleybarrett5959
@ashleybarrett5959 2 жыл бұрын
This was extremely helpful! Thank you so much for this video!
@janenelengert188
@janenelengert188 Жыл бұрын
AWESOME!! Thank you SOOO much for sharing, this is exactly what I was looking for!!!
@b.mckinnon1429
@b.mckinnon1429 Жыл бұрын
Awesome tutorial! Thanks so much 🙏🏽
@BKhiggins25
@BKhiggins25 2 жыл бұрын
if you're still looking for a better way to align your cards, I like to enter the x and y axis coordinates so I know they're exact instead of shifting them around.
@SillyCrafting101
@SillyCrafting101 2 жыл бұрын
Wow. Thanks for the tips! I will try it out
@pln4679
@pln4679 Жыл бұрын
Me too! I got tired of guesstimating!
@natiliafranklyn8699
@natiliafranklyn8699 Жыл бұрын
​@@pln4679 see
@tiffanywoolfrey7979
@tiffanywoolfrey7979 Жыл бұрын
How does one do this?
@SunFlameBeeswaxCandles
@SunFlameBeeswaxCandles 10 ай бұрын
Thank you so much! You did such an excellent job at explaining everything without the video being too long & wordy! It was perfect 🤩 thanks girl! Bee 🐝 blessed much love & light
@SillyCrafting101
@SillyCrafting101 9 ай бұрын
Glad it was helpful! Thanks for watching !
@plantmamadrama9696
@plantmamadrama9696 Жыл бұрын
You did a great job talking us through ! Thank you!
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
thank you so much!
@amandachristensen-goerd1750
@amandachristensen-goerd1750 2 жыл бұрын
This is super helpful! Thank you!
@ashleypamelie
@ashleypamelie 2 жыл бұрын
Thank you so much for this tutorial! It was easy to follow the steps and institutions were accurate!!
@SillyCrafting101
@SillyCrafting101 2 жыл бұрын
Of course. Glad it helped !
@jackiechavira8675
@jackiechavira8675 2 жыл бұрын
Thank you for this! I have an event this weekend and I didn't realize I was out of cards! This was so helpful.
@SillyCrafting101
@SillyCrafting101 2 жыл бұрын
Awesome! Glad to hear it ! Thank u for watching 💕
@Z.haller
@Z.haller 2 жыл бұрын
Does the color already come when using a colored design or have to buy something in specific for the color to come out?
@AthenasJourni
@AthenasJourni 4 ай бұрын
This was exactly what I was looking for. I was trying to figure out how to get the cut lines to match and you moving the second page over was perfect. Thanks so much for sharing 😊
@SillyCrafting101
@SillyCrafting101 4 ай бұрын
glad it was helpful!
@charmainecenteno4720
@charmainecenteno4720 2 жыл бұрын
this was super helpful! Thanks a looooot!
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
thanks for watching!
@fatimahbrown2159
@fatimahbrown2159 2 жыл бұрын
Thank you sooooo much. This was very helpful
@SillyCrafting101
@SillyCrafting101 2 жыл бұрын
I'm so glad it helped !
@BeyondTshirts
@BeyondTshirts Жыл бұрын
Thank you SO VERY much for doing this!!!!!!
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
You are so welcome!
@jetv6775
@jetv6775 11 ай бұрын
Im literally going to try this tonight!! Thank you so much for uploading this your a Star 🌟😊
@SillyCrafting101
@SillyCrafting101 11 ай бұрын
Hope you enjoy it! you're so welcome!
@gamingwithjas2490
@gamingwithjas2490 Жыл бұрын
I am so glad you did this, thanks so much!!!
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
You are so welcome!
@alexkayy26
@alexkayy26 Ай бұрын
I'm starting my own sticker business this year and this was the first video that made it look easy to understand how to line everything up for business cards ❤
@SillyCrafting101
@SillyCrafting101 15 күн бұрын
awesome! glad to hear it
@crystalcasarez842
@crystalcasarez842 2 жыл бұрын
Life Saver!! Thanks!
@SillyCrafting101
@SillyCrafting101 2 жыл бұрын
😊
@Tishfunch80
@Tishfunch80 2 жыл бұрын
Thank you so very much😊🙏🏽🙏🏽
@Lovetinaa
@Lovetinaa 2 жыл бұрын
Your business card is super cute
@dreezy.b6726
@dreezy.b6726 Жыл бұрын
Thank you for this video!!!
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
You are so welcome!
@aneane2803
@aneane2803 Жыл бұрын
I've watched a couple videos on this and i couldn't figure it out until now... Thanks:)
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
Glad I could help!
@TriaMoonlily
@TriaMoonlily 4 ай бұрын
Thank you !!!
@SillyCrafting101
@SillyCrafting101 4 ай бұрын
You're welcome!
@nicoledunn6925
@nicoledunn6925 2 жыл бұрын
OHHHHHHHHH. Good thinking
@yaritzanegron5756
@yaritzanegron5756 2 жыл бұрын
you are awesome thank you!!!!!!
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
thanks for watching!
@valentinashimizu3731
@valentinashimizu3731 10 ай бұрын
Thank you! ❤❤❤
@SillyCrafting101
@SillyCrafting101 9 ай бұрын
You're welcome 😊
@coppermoonwellness
@coppermoonwellness Жыл бұрын
This was so helpful! Thank you so much.
@estellac3926
@estellac3926 11 ай бұрын
Wow. Thanks ☺️ 😮
@SillyCrafting101
@SillyCrafting101 11 ай бұрын
You're welcome 😊
@M-10653
@M-10653 Жыл бұрын
Thanks so much
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
You're welcome!
@colleenhatton4333
@colleenhatton4333 Жыл бұрын
Wow!
@legendzer0496
@legendzer0496 Жыл бұрын
Might need to run your cricut through a calibration... I noticed it missed the cut just a tad. The calibration could fix that. Your video really helped me so I'm sharing the 1 thing I know. Lol
@scaasiyburllc
@scaasiyburllc 2 жыл бұрын
wow. Amazing
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
You are so kind
@TiLabree
@TiLabree 2 жыл бұрын
I’m here from Tiktok😁love your videos
@SillyCrafting101
@SillyCrafting101 2 жыл бұрын
Thanks so much ! 🙏
@poppygardner681
@poppygardner681 10 ай бұрын
hey! one thing that helps it go faster is when duplicating you can click on what you want to duplicate and hold down the option button and then use your finger on the keypad and slide to duplicate. also as you are pressing the option button to duplicate also hold down the shift button and it aligns the stuff you duplicated so its easier. this helps you not have to use the align tool every time!
@SillyCrafting101
@SillyCrafting101 9 ай бұрын
Thanks so much ! I'll try it
@rosac8168
@rosac8168 Жыл бұрын
Thank you I’m trying to learn so I can help My friend with her Small business
@SillyCrafting101
@SillyCrafting101 11 ай бұрын
Best of luck!
@leratopolite2422
@leratopolite2422 Жыл бұрын
Thank you much ❤this tutorial is so easy and short…something was looking for the past two years 😢
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
Glad it was helpful!
@monicab28
@monicab28 Жыл бұрын
I would resize both of them together at the very start so they will be the same size the whole time.
@sandravillalobos3285
@sandravillalobos3285 Жыл бұрын
GAVE ME THE EXTRA PUSH THAT I NEEDED TO GET IT RIGHT!! I FIND IT EASIER TO GROUP THE IMAGES CENTERED, THAN PUT IT ON THE SQUARE, THAN ATTACH EACH SIDE... MAKES IT EXACT POSITIONING!
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
thank you! i will give it try
@Queendomscandlesllc
@Queendomscandlesllc 2 жыл бұрын
Thank you so much for this video. I was over paying ppl to do something I know I can do at home. Question where do you get the paper to make your business cards?
@SillyCrafting101
@SillyCrafting101 2 жыл бұрын
From Amazon. Link in description
@SheWritesHerJourney_
@SheWritesHerJourney_ 2 жыл бұрын
This was a great breakdown, I’ll still learning on my end unfortunately everything didn’t come out as it should. Do you know how to change the printer to print in color or will you go in settings.? Mine printed in black and white.
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
i use system dialogs in the printer
@Iamtequilabnatural
@Iamtequilabnatural Жыл бұрын
Thanks so much I was trying to make Thank You cards and didnt want to have to pay to have them printed
@Z.haller
@Z.haller 2 жыл бұрын
Hey, if I use plain cardstock paper (white) does the color already come when using a colored design? Or have to buy something in specific for the business cards to come with color?
@tauheedahmuhasin1920
@tauheedahmuhasin1920 Жыл бұрын
need colored printer ink
@perlagomez9105
@perlagomez9105 Жыл бұрын
I do exactly the same thing and is off ong idk what to do
@leytan1431
@leytan1431 Жыл бұрын
Hello did you used normal ink cardiges or sublimation colors? thanks
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
Normal ink with HP printer
@leytan1431
@leytan1431 Жыл бұрын
@@SillyCrafting101 thanks 🙏
@juliadelutrie5029
@juliadelutrie5029 7 ай бұрын
Hi, whenever I click make I never have the full black square around my design like yours does, only the corners that the Cricut scans. I can't shift everything to the right side because of this, how do you get the black line / square around the ewhole design?
@SillyCrafting101
@SillyCrafting101 7 ай бұрын
i believe that's because cricut updated and does the outlines different. ill make an updated video soon
@MargoDiPatri
@MargoDiPatri 2 жыл бұрын
Does anyone else notice that the 2nd page is always off by 1/4 inch or more, even when you do it this way?
@SillyCrafting101
@SillyCrafting101 2 жыл бұрын
Are u moving the 2nd page to the opposite side ?
@deepeebb
@deepeebb 2 жыл бұрын
@@SillyCrafting101 how do you that? Im habing the same issue 🥲
@SillyCrafting101
@SillyCrafting101 2 жыл бұрын
@@deepeebb click, hold and drag
@lovechinky6703
@lovechinky6703 2 жыл бұрын
experiencing this same issue and its driving me nuts
@Rndmzd.podcast
@Rndmzd.podcast 2 жыл бұрын
You can adjust the size by unlocking the second page and adjust the size then lock it again so you dont accidentally ruin the size you designate for them
@TARUNJAGGI
@TARUNJAGGI 2 жыл бұрын
which printer you using ?
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
hp envy. in description
@Texaschic79915
@Texaschic79915 10 ай бұрын
Hi , ahhh well I keep printing over and over ..my stuff is either too high or too low .. when I got an actual one that printed good I think it reset placement… not sure
@SillyCrafting101
@SillyCrafting101 10 ай бұрын
alignment is always tricky. maybe try adding a bleed when printing?
@Melaninbeauty88
@Melaninbeauty88 2 жыл бұрын
If I do a thank you business card. How do I get the design on the back of the card.
@SillyCrafting101
@SillyCrafting101 2 жыл бұрын
I showed that in my tutorial. Print on both sides of the paper
@Bellakrizy2121
@Bellakrizy2121 Жыл бұрын
What kind of paper did you use for business cards
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
carldstock
@Jerry-jg1io
@Jerry-jg1io Жыл бұрын
Where did you buy the card cutting machine?
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
amazon. link in amazon storefront
@lucymilopezrodriguez3922
@lucymilopezrodriguez3922 2 жыл бұрын
Hi!! What paper did you use?
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
80lb cardstock
@JanineMKartist
@JanineMKartist 9 ай бұрын
what kind of cardstock did you use?
@SillyCrafting101
@SillyCrafting101 8 ай бұрын
80lb cardstock. linked in description
@TheTuquito6
@TheTuquito6 Жыл бұрын
what is the cost for each card, paper plus equipment? thx.
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
Links of what I use in the description. Your welcome to do the math
@NickDoddTV
@NickDoddTV 6 ай бұрын
You don't need to manually align things for design space if there's multiple. Just copy and paste as many as you want and when it goes to review it will automatically align them even if on your design space layout they're overlapping as they do when you paste over and over.
@NickDoddTV
@NickDoddTV 6 ай бұрын
I do this for print and cut. There's literally Zero alignment of your designs required, as long as you've got the even number of 10 per side or whatever it is they'll align automatically every time
@SillyCrafting101
@SillyCrafting101 6 ай бұрын
the alignment here is for the purpose of mirroring the front and back of the page. i see what you mean tho. i'll try it in my next video. thank you!
@londenloyal6447
@londenloyal6447 Жыл бұрын
What kind of paper did you use?
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
Link is in the description below. It's the 80lb white cardstock
@jenniferclark5029
@jenniferclark5029 Жыл бұрын
What kind of paper can be used?
@SillyCrafting101
@SillyCrafting101 11 ай бұрын
80lb cardstock
@yatznelly88
@yatznelly88 Жыл бұрын
Hi, I can’t move the paper on the mats to print on one corner and the second page on the other corner 😢
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
oh no :( maybe save your project and reopen the system?
@chidimmaabasilim9188
@chidimmaabasilim9188 8 ай бұрын
Please what type of paper was used?
@SillyCrafting101
@SillyCrafting101 8 ай бұрын
80lb cardstock. Link in description
@dianaespinoza4188
@dianaespinoza4188 Жыл бұрын
My canva is black not white, and the left side of your screen is on the bottom for me. No option to align the cards for me. I’m so frustrated, not sure what to do!
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
Sorry. Haven't seen that before. 😕
@Lyricalyoungin
@Lyricalyoungin 2 жыл бұрын
Here to support with subscription
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
thanks so much!
@adriannalemuz6024
@adriannalemuz6024 Жыл бұрын
It’s all good until I get to the cutting part. My cricut keeps trying to cut the letters out instead of the rectangle? Any tips?
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
Make sure you are flattening with a solid shape in the back
@dixoncookie3574
@dixoncookie3574 2 жыл бұрын
Can't figure how to move page after you click make it
@SillyCrafting101
@SillyCrafting101 2 жыл бұрын
Click, hold and drag
@jjuanguevara1
@jjuanguevara1 8 ай бұрын
How did the ink not peel from the bottom side of the cards???
@SillyCrafting101
@SillyCrafting101 8 ай бұрын
ive never seen ink peel before
@jjuanguevara1
@jjuanguevara1 8 ай бұрын
@@SillyCrafting101 it seems to happen to glossy cardstock. Matte not so much
@hayleytoups7630
@hayleytoups7630 Жыл бұрын
the fact that i searched this up for lash aftercare/loyalty cards i made on canva 😂
@laleevue6350
@laleevue6350 Жыл бұрын
How or where to get the software?
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
Canva and cricut desig space are free online
@NOCHI11ZONE369
@NOCHI11ZONE369 Жыл бұрын
You need to put the first part in the bio
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
It is
@savannah6378
@savannah6378 Жыл бұрын
I’m still having problems and doing exactly what you say 😢
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
yes
@amccourry1
@amccourry1 Жыл бұрын
Thank goodness for pause & reverse …
@carmenameliamalgieri7189
@carmenameliamalgieri7189 Жыл бұрын
DIY 📇
@jordantrauner4024
@jordantrauner4024 Жыл бұрын
everything is aligned and perfect until the printing process. even when i move one side to the upper right hand corner and leave the other side where it is, it doesn’t line up. and then if, by a miracle, it does like up, the cricut cuts it unevenly. in serious need of help 😭
@nicolekallend561
@nicolekallend561 Жыл бұрын
I have the same problem - the black border lines done match up.
@sheilabecerra2439
@sheilabecerra2439 Жыл бұрын
Same for me
@bdboston
@bdboston Жыл бұрын
@@nicolekallend561 Me too. Back is not centered.
@nicolekallend561
@nicolekallend561 Жыл бұрын
@@bdbostonI'm sorry to say that I gave up and had them printed professionally. I hope you manage to find a way!
@MsEva45
@MsEva45 Жыл бұрын
Thank for all your trouble
@asiabrilliance7162
@asiabrilliance7162 Ай бұрын
I'm watching this 2 years later, and this IS the best business card video, and so simple. I don't need to go anywhere else. Thank you for your time and help along our making journey.
@SillyCrafting101
@SillyCrafting101 15 күн бұрын
im glad. about to do an updated video soon
@amamrasaid8653
@amamrasaid8653 Жыл бұрын
I LOVE YOU KING OF THE WORLD SIR AMAMRA SAID THANK YOU SEE THAN.
@letisjourney2310
@letisjourney2310 Жыл бұрын
My text keeps trying to get cut 😭
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
Are you flattening?
@isomarulor
@isomarulor 6 ай бұрын
you are not doing the alignment correctly. if you keep using align to top or bottom it It will never really alinge across the board. I would make sure they are on the same grid line both vertical and horizontal line from the beginning
@SillyCrafting101
@SillyCrafting101 5 ай бұрын
Thank you for the tips !
@InkArtista-nt6zk
@InkArtista-nt6zk 10 ай бұрын
It's soo off
@SillyCrafting101
@SillyCrafting101 9 ай бұрын
Trial and error
@coffibaa
@coffibaa Жыл бұрын
I find the title of touch’s video annoying. I know you can print with some Cricut and I’m just trying to find a video that does this on card. All these videos talk of printing with Cricut and then use a separate printer.🙈
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
The cricut is a cutting machine. It does NOT print. If u do a print and cut feature, u have to print with a separate printer.
@coffibaa
@coffibaa Жыл бұрын
It honestly took me all day of researching to discover it doesn’t print. For some reason I thought the latest versions did! My bad! 🙈 Thank you! I’ve ordered a printer.x
@SillyCrafting101
@SillyCrafting101 Жыл бұрын
@Tammi Preece it would be cool if the cricut could do both. Maybe one day lol. No problem. Here to help !
Make Double-Sided Business Cards Instantly with Cricut - Here's How!
21:49
How to print and cut double sided cards in Cricut Design Space
25:38
Climbing to 18M Subscribers 🎉
00:32
Matt Larose
Рет қаралды 22 МЛН
Is it Cake or Fake ? 🍰
00:53
A4
Рет қаралды 17 МЛН
How to Make Business Cards with Cricut | Cricut Business Cards
15:58
InsideOutlined
Рет қаралды 46 М.
TIKTOK CRICUT HACKS PART 2
23:23
Kayla's Cricut Creations
Рет қаралды 883 М.
20 CRICUT HACKS I LEARNED ON TIKTOK
26:26
Kayla's Cricut Creations
Рет қаралды 4,6 МЛН
CRICUT FOR BEGINNERS: Everything I wish I knew when I first started!
32:22
EVERYTHING YOU NEED TO KNOW TO USE THE NEW CRICUT FOIL TRANSFER TOOL | MAKE A BOOKMARK
20:44
Each found a feeling.#Short #Officer Rabbit #angel
0:17
兔子警官
Рет қаралды 7 МЛН
白天使为什么会被小丑赶出去?#天使 #小丑 #超人不会飞
0:57
Тайна голубого озера😱
0:35
FilmBytes
Рет қаралды 9 МЛН