DIY / how to TAKE OUT the stereo and FIX the sound - 2004 Corolla Verso 1.8

DIY / how to TAKE OUT the stereo and FIX the sound - 2004 Corolla Verso 1.8 - Bildilla Magasin

Рет қаралды 31,398

5 жыл бұрын

DIY how to take out the stereo and fix the sound, 2004 Corolla Verso
How to disassemble the original stereo in a 2004 Toyota Corolla Verso.
Get your own "4pcs Car Radio Panel Trim Dash Car Audio Removal Tool By Body Clip Plastic Pry Tool Kit"
Because of. loss of sound, from the stereo, I suspected that there was bad contact in the plugs on the back of the stereo. The sound came and went. And it sometimes helped to knock on the stereo.
For that, it was just to find the easiest way to disassemble the stereo and see if I found the error.
Upon inspection and cleaning of contacts, I unfortunately found no errors ...
But a new search online gave me yet another possible solution.
The problem is solder joints that are broken due to vibrations.
The 4 components that are screwed into the car body of the stereo must be soldered an extra round, so that contact is made again. Then the stereo should work again!
All single contact points, must be soldered separately as original!
---------------
DIY hvordan ta ut stereo og fikse lyden, 2004 Corolla Verso
Hvordan demontere orginal stereoen i en 2004 Toyota Corolla Verso.
P.g.a. bortfall av lyd, fra stereoen, så fikk jeg mistanke om at det var dårlig kontakt i pluggene bak på stereoen. Lyden kom og gikk. Og det hjalp noen ganger å dunke på stereoen.
Der for var det bare å finne den enkleste måten å demontere stereoen, og se om jeg fant feilen.
Ved inspeksjon og rens av kontakter, så fant jeg dessverre ingen feil...
Men et nytt søk på nett, ga meg ennå en mulig løsning.
Problemet er loddinger som blir brutt p.g.a. vibrasjoner.
De 4 komponentene som er skrudd i karosseriet på stereoen, må loddes en ekstra omgang, slik at man får kontakt igjen. Da skal stereoen virke igjen!

Пікірлер: 54

@abdulqayum6660 6 ай бұрын

One of the best detailed video ever.. thank you for sharing

@bildillamagasin 6 ай бұрын

Good day! Thank you very much for the feedback! Have tried to include even more info about tools and attraction etc. in several videos after this one. But really learned that it is important to bring out details when possible. Often difficult to get to with a camera, but this video was filmed with a mobile phone. I suddenly realized that someone else could benefit from it. Hope you and yours have a really good New Year when we get there in just a few days! Greetings Pål (Paul)

@jeremiasdeponte617 4 жыл бұрын

Just fixed mine . The problem was exactly the solder broken on the last pin to the left. Now the sound, screen back light and the cd player all work. thanks a bunch for the video.

@bildillamagasin 4 жыл бұрын

It was very good and hear! Happy to be of help! :)

@DasEtwasification 3 жыл бұрын

Thank you, that really helped :) Two small notes: 1. Be careful when taking out the screws that fix the radios to the car, if you drop them, they are gone. Ask me how I know :) 2. When taking out the PCB, instead of just pulling it out slightly, disconnect the two ribbon cables, the one to the display has two small tabs left and right that you can pull. After that the cable just comes out. The one to the CD Player has a handy flap on the right side with to small screws. Just pull it out and push it back in later. Gives you the whole PCB for easy soldering.

@bildillamagasin 3 жыл бұрын

Thank you very much Screws that fall into the center console are probably a lot of extra work to get out! See I have benefited a lot from long-magnet handles and long grip arms! Something you can just as well buy right away ... Suddenly you need such things. I think I need to make a little video about this!

@bildillamagasin 3 жыл бұрын

Very nice that the video helped you get the radio fixed then!

@TheFozzie82 3 жыл бұрын

This has been driving me insane for a few weeks. Tried this today and it worked 👌. Thanks for the video. It really helped 👍

@bildillamagasin 3 жыл бұрын

It was good to hear! KZfaq is perfect for helping others with small and big issues! Thank you very much for the return message, it is good to know that someone will enjoy some of the videos. Regards Pål (Paul)

@SixEightSoundControl 2 жыл бұрын

Great video. I fixed my radio today. Thanks for documenting your steps. Saved me a lot of hassle.

@bildillamagasin 2 жыл бұрын

Hello. Thank you for your feedback! Good to see that the video benefits as many people as possible! Regards Pål

@royhogan8566 2 ай бұрын

Thanks a million, just fixed the same problem on my 2005 Corolla verso 😊

@bildillamagasin 2 ай бұрын

That was very nice to hear! There are starting to be a lot of people who have had their stereo fixed after being there now! Good to be able to arrange, instead of just throwing away having to buy a new one! Greeting Pål (Paul)

@bildillamagasin 4 жыл бұрын

It's nice to see that this video has been helpful to many! I have posted MANY how to videos after this one. Very many about my Land Cruiser 120, and now I'm on a 2000 Toyota Celica. Then more about 1998 Celica .... And many other projects are heading into the garage !!!

@bildillamagasin 4 жыл бұрын

Det er fint å se at denne videoen har vært til hjelp for mange! Jeg har lagt ut MANGE how to videoer etter denne. Veldig mange om min Land Cruiser 120, og nå holder jeg på med en 2000 Toyota Celica. Så kommer mer om 1998 Celica.... Og mange andre prosjekter er på tur inn i garasjen!!!

@markcostin3340 Жыл бұрын

Brilliant instructions.,.. i had exactly the same problems and just fixed it in 1hr 30 using this video.. many thanks :^)

@bildillamagasin Жыл бұрын

😀That was really nice to hear! Good to be able to help someone out there!

@bledindreshaj Жыл бұрын

U got new subscription only because of this video…have a nice day…

@bildillamagasin Жыл бұрын

Good day! Thank you! Hope you get your stereo fixed! Hope I can have other videos that can help you in the future as well. Good luck, and I hope you have a very good new year! Regards Pål (Paul)

@bildillamagasin 4 жыл бұрын

today 17 / 7-2020, follow no. 300. We hope that more and more of you, start following the channel! 😀

@fadijlelati9035 3 жыл бұрын

Jag gjorde precis samma video och gick bra 100 procent rätt. Tusen tack

@bildillamagasin 3 жыл бұрын

good day Yes, there are many who have followed the same recipe and it is clearly a mistake that comes on many of these stereos. Good to hear you got the stereo fixed! Regards Pål (Paul)

@karlwalkden8443 2 жыл бұрын

Nice one pal. Will have a go this weekend.

@bildillamagasin 2 жыл бұрын

Yes it is a mistake that very many get! Hope you have success with the fix! Regards Pål (Paul)

@doudekdoudek9655 9 ай бұрын

Merci infiniment pour cette vidéo 👍👍👍

@bildillamagasin 9 ай бұрын

C'est bien que la vidéo profite à plus de gens ! Salutation Pål (Paul)

@CrazyBalt95 11 ай бұрын

Thanks for the video. Fixed it 3 times, but due to being in the sun it sometimes stops working, if anyone does this i suggest adding a flexible wire connections to the transistors so it will always work and not behave like mine - in the sun does not work and in the evening works :D need to resolder again

@bildillamagasin 11 ай бұрын

Thats a big problem. Sorry. Hop IT work out!

@emilillorach3080 2 жыл бұрын

Good one!🙂 But quite difficult dissasembly process...

@bildillamagasin 2 жыл бұрын

Good day! Yes, there are a number of screws, before you get to the place it often becomes the fault of these players. Fortunately, the error is so easy to fix that many will be able to fix it themselves, or have friends who can help. Regards Pål

@salwaell5187 Жыл бұрын

شكرا لك

@bildillamagasin Жыл бұрын

It's good to be able to help! Regards Pål (Paul)

@unomas999999 3 жыл бұрын

Nicu work

@bildillamagasin 3 жыл бұрын

Thank You! :)

@rattlebob8984 3 жыл бұрын

Sadly didn't work on mine. When I turn the volume knob the number doesn't change, and no sound.

@bildillamagasin 3 жыл бұрын

Sorry it was a shame you did not make it work. If you are 100% sure that the soldering has contact, then there must be something else. I think I saw another video on KZfaq, about another error that could occur! Try a search, so maybe you will find more info about other solutions! Good luck!!

@FLIGHTC0NTR0L 3 жыл бұрын

Great !!! Thank You !!! :-)

@bildillamagasin 3 жыл бұрын

Thank you so much for the return message! Good to hear that the video is helpful! :)

@FLIGHTC0NTR0L 3 жыл бұрын

@@bildillamagasin Very helpfull !

@bildillamagasin 3 жыл бұрын

@@FLIGHTC0NTR0L Thats Nice!!! :)

@bildillamagasin 4 жыл бұрын

The plan is to continue building the KZfaq channel, with 2 new videos coming week! In order to run this the way I want, it is important that people give feedback on what they want more on the channel. And what should have been done better !!!! It is also important to get in touch with several car owners, who would like to know something about their car / project, on the channel. Preferably in central Norway in the first place. And it is very important to include more followers / subscribers! kzfaq.info Greetings Pål

@Estefania_c23 9 ай бұрын

Esa cámara que se ve al principio funciona? Vi una y la quiero para la reversa. Gracias.

@bildillamagasin 9 ай бұрын

¡Buenas noches! ¿No recuerdo que hubiera una cámara en el video? Al principio se trataba de un receptor de radio DAB/digital, que recibía energía de la toma del cigarrillo. Saludo Pål (Pablo / Paul )

@zezitolx 4 жыл бұрын

hello my toyota radio wont turn on i chek fuses ok, do you think same reazon?

@bildillamagasin 4 жыл бұрын

Good day. Yes, I would start with checking the fuses sure, if the radio is completely dead. The radio in this Corolla, behaved strangely. It could be turned on. Sometimes the sound came, sometimes not. Sometimes everything looked just fine, other times there was something wrong with the lights and info on the screen. Everything then indicates that the fuse is fin, and I double checked it. It was absolutely fine. I then began to suspect that there was something wrong with the connectors on the back of the stereo. I dismantled it, to see if I could find a simple bug there. But everything seemed fin. Then the search for google started. And found several sources that together gave me the answer to the error described in this video. Vibrations over time, which have worn out the contact between some components and the printed circuit board on which they were mounted.

@sameralghamisi2779 Жыл бұрын

Please help, how does bluetooth work, is this a bluetooth enabled car or a way thanks

@bildillamagasin Жыл бұрын

Hello The car has no bluetooth support! The adapter I use for DAB radio has support for hands-free mobile phones. Greeting Pål (Paul)

@sameralghamisi2779 Жыл бұрын

@@bildillamagasin I don't know if this radio is similar to what you are working on

@bildillamagasin Жыл бұрын

@@sameralghamisi2779 What radio do you have? Maybe there were live different radios in different parts of the world too!

@sameralghamisi2779 Жыл бұрын

Yes

@_muslim_007 Жыл бұрын

hello, please tell me to solder the turns together or solder each turn separately and everything will work, the author of the channel please tell me or those who understand this. I will be very grateful🤗

@bildillamagasin Жыл бұрын

Hello. The problem is solder joints that are broken due to vibrations. The 4 components that are screwed into the car body of the stereo must be soldered an extra round, so that contact is made again. Then the stereo should work again! All single contact points, must be soldered separately as original! Greeting Pål (Paul)

@gyorgygergely936 4 жыл бұрын

Nem ér semmit a forrasztás.

@bildillamagasin 4 жыл бұрын

It worked just fine on this car! The soldering is damaged due to vibrations in the stereo chassis. The solder is broken, and poor contact is made to the components that are screwed into the chassis. They are probably screwed in for better cooling of these components. But this proves to be a poor solution in due course. Many have tried this method and it works just fine :)