Рет қаралды 70
DIY / How To: Toyota Celica MK 7
1999 to 2006 Toyota Celica T23
And almost the same on all Toyotas!
New bushings - service work
part1
Bildilla Magasin
Video part 2: • DIY / How To: Toyota C...
Playlist of videos about Toyota Celica:
• Celica
We have struggled with some metallic noises in the car. Especially when driving on a bumpy road... Something that is very common here in Norway!
I have changed the div before, without getting rid of the sounds.
Now I have bought a set of bushings, so that I can start the job of changing even more in the front + strut brace bushings at the back.
This is not so easy when you have to work outside, and the weather is not always kind. + Most screws and bolts are very rusty due to all the salting on Norwegian winter roads!
#toyotacelica #celicamk7 #howto
--------------------------------------------------------------------
Vi har slitt med noen metalliske dunkelyder i bilen. Spesielt når man kjører på humpet vei… Noe som er veldig vanlig her i Norge!
Jeg har bytte div tidligere, uten å ha blitt kvitt lydene.
Nå har jeg kjøpt inn et sett med foringer, slik at jeg kan starte jobben med å bytte ennå mere i forstillingen + stabstag foringer bak.
Dette er ikke så enkelt når man må jobbe ute, og været ikke alltid er vennlig innstilt. + De fleste skruer og bolter, er godt rustne på grunn av alt saltingen på Norske vinterveier!
----------------------------------- Disclaimer! -----------------------------------------------
The videos are made by an untrained mechanic! All the videos are therefore to be regarded as my own experiences, and no conclusion. The videos show what I have done, and the result does not always have to be as desired. Sometimes things go directly wrong, and then I try to find out what went wrong, and try to set a better example so that others will not have to make the same mistake as me.
The videos were filmed by myself, and it may have been unknowingly missing to include ALL the details. I try my best to find out what I do and what I find out. But getting cameras in the right places is not always easy!
Very important!!! Do not take any chances with safety, neither your own nor anyone else's! Never work under a car, without and double security. Things can happen, so you must always have extra safety in case something should break or overturn, etc.
Working on cars poses a danger no matter what. So be aware, and if you do not feel 100% sure of the result, rather ask others to help you or double check what you have done, before you expose yourself and others to danger!
---------------------------- Social -------------------------------
Home page: www.bildillamag...
Facebook: / bildilla-magasin-21561...
Instagram: / lermax_cars