Рет қаралды 3,753
Finishing out the 06+ conversion and MOVE bumper upgrade, I show how to use the OEM fog light switch to run independently from the low and high beams. Easy to go back to stock if you ever change your mind, this is an awesome mod for any offroader vehicle!
Please note that for 2003-2004 pin #17 is a solid blue wire, connect this together to the white with black stripe wire going to pin #16. Again, there is also a red with green stripe wire in the 2003-2004 harness at pin #7, this is NOT the wire you want to connect to.
Forum I used: www.top4runners.com/ja/2007/f...
======================================================
For updates and pictures before videos are published, follow my Instagram:
/ my.lame.perspective
======================================================
I'm just a normal guy and I am not a trained mechanic. I like to make interesting car mods and show you how I've gone about it, but I can't promise that anything I show you will work for your particular car, or that you won't harm yourself, someone else, your car or warranty doing it. Please be safe, be responsible and unless you know what you're doing, speak to a qualified mechanic. I assume no liability for property damage or injury as a result of any of the information contained in this video. Use the information provided at your own risk.
======================================================
0:00 - Intro
0:40 - What you'll Need
1:34 - Where to wire it up
2:11 - How it works
2:49 - Fogs w/high beams
3:40 - Which wires to clip
4:14 - How it works (any time fog mod)
4:30 - Thank you & outro
======================================================
Tags:
#Independentfogs #4Runner #4thGen