DIY INNER FENDER AND HEATER CHANNEL REPAIR ON A VOLKSWAGEN BEETLE OVAL 1955 EPISODE #39
Рет қаралды 923
2 жыл бұрынSheet metal work is always something that takes a long time to do it right and to fix all the problems. But in this EPISODE #39 i show you how to DIY HEATER CHANNEL AND INNER FENDER REPAIR on a VOLKSWAGEN BEETLE OVAL 1955.
@vayabroder729 2 жыл бұрын
Fascinating as always! Killer work! Thank you!
@VWBEETLEOVAL1955 2 жыл бұрын
Thank you for this nice comment👍👍👍
@johnfreeman1189 2 жыл бұрын
I just want you to know your videos have been extremely helpful for me. Keep up the good work! I appreciate your time and effort.
@VWBEETLEOVAL1955 2 жыл бұрын
Thank you very much, this means a lot to me. I’m very glad that I help others with my video’s 👍👍👍
@robertjohnstone2869 2 жыл бұрын
Lovely work again fillip, as good as any professional I've seen.
@VWBEETLEOVAL1955 2 жыл бұрын
Thank you very much, this means a lot for me👍👍👍
@iapologizeinadvance4812 2 жыл бұрын
Top job!!
@VWBEETLEOVAL1955 2 жыл бұрын
Thank you very much, I really appreciate it 👍👍
@backyardkombi5466 2 жыл бұрын
Nice work.
@VWBEETLEOVAL1955 2 жыл бұрын
Thank you , I really appreciate it 👍👍👍
@ELVISPRESLEYFANSSEARCHTHETRUTH 2 жыл бұрын
Great work
@VWBEETLEOVAL1955 2 жыл бұрын
Thank you sir, I really appreciate it 👍👍👍
@HubertusSchaper 2 жыл бұрын
Hi Filip, indeed nice padge work 👍🏻and still one more step to the full restoration of the Bug👏. keep up the good work. greetings.☮🍀🇳🇴Hubertus.
@VWBEETLEOVAL1955 2 жыл бұрын
Thank you very much Hubertus. Step by step and piece by piece we are getting there. Thank you for the support 👍👍👍
@zimms-world 2 жыл бұрын
Great work. Good timing on this. I need to weld in the same patch on my bug
@VWBEETLEOVAL1955 2 жыл бұрын
Thank you, I hope that this video will help you out. If you have questions? Just pm me👍👍👍
@coreypint8358 2 жыл бұрын
My 72 beetle has the same rust spot. Never welded before. Going to rent a welder and try to fix this rust. Thanks for the video.
@VWBEETLEOVAL1955 2 жыл бұрын
Thank you for the comment, I hope these video’s will help you out to do the job👍👍👍
@sevenoaksbrewing 2 жыл бұрын
New subscriber here. Enjoyed the video! Now I have a lot of catching up to do 😀
@VWBEETLEOVAL1955 2 жыл бұрын
Thank you very much to subscribe to my channel, indeed a lot off catching up to do and I hope you like the others to👍👍👍
@SladesVWBeetle 2 жыл бұрын
Your work is really awesome my friend. I see you had an injury that time. 😁 Tape works! That car is going to be so solid. I’m just getting ready to start doing, what you have done. Although I don’t want to. 😁
@VWBEETLEOVAL1955 2 жыл бұрын
Thank you Tony. once you start on that metal work, you will learn a lot about welding. I didn’t work with sheet metal in the past, until I started with this car.
@SladesVWBeetle 2 жыл бұрын
@@VWBEETLEOVAL1955 Really?? Wow, I’m quite surprised you look like a professional at it. I really admire your car, and you have a great personality for doing this. Thank you for taking the time out to make these videos.
@VWBEETLEOVAL1955 2 жыл бұрын
@@SladesVWBeetle thank you for the compliment. The thing is, when I see someone doing some metal work, I always look and learn from it.
@AircultBerlin 2 жыл бұрын
good work as always. to make it easier don't use such a thick chisel, but the great thing I use in my videos. featured in ep04, used a lot in ep08. I thought I saw it before in your videos too
@VWBEETLEOVAL1955 2 жыл бұрын
Thank you for the comment. Yeah this video was taken before I found that painter chisel back. Since then I never used a n’other shisel.
@ljkkj2511 2 жыл бұрын
👍🏼👍🏼👍🏼👍🏼
@VWBEETLEOVAL1955 2 жыл бұрын
Thank you, I hope you liked it 👍👍
Slades VW Beetle
Рет қаралды 15 М.
VWJAWBREAKER
Рет қаралды 8 М.
Classic VW Bugs
Рет қаралды 14 М.
Scotty Kilmer
Рет қаралды 91 М.
TurboBikes
Рет қаралды 7 МЛН
MotoTaper
Рет қаралды 1,1 МЛН
Nersva
Рет қаралды 4,6 МЛН