Once again a solid video boys!! The Jk has made a transformation from when it came home!! Keep up the good work!! Loving the weekly video setup. Had me worried for a minute last Sunday!!

Man when y'all build a Jeep, y'all really build it!! Great video guys!!

Happy for yall and the shop the jeep looks nice brother love the seats

🔥🔥🔥Nice build

If you take out one spring in the coil pack on all 4 corners and lock them out with the slider rings you can get a good ballpark on your spring rates. So if you have a single 200lb (example) spring that’s is locked out and you have 8” of shock shaft showing. Once you lower the weight of the jeep down you only have 4” remaining. You loose 4” on a 200lb spring. Poly with be able to figure out your sprung weight of the vehicle and get you the proper spring rates for the amount of shock you want showing at ride height.

They look sick!!! Strong work. Can’t wait for headquarters to be built!!

I was waiting for video on Sunday morning. Nice build 👌

Caleb can weld!

Loving the content!!! You guys are my favorite off-road KZfaq channel. Keep it up fellas!

First time I've ever seen a concrete mixer that mixed on the spot as needed. We just use the rotary tumbler style in Tn. That was pretty 😎. I bet I logged on KZfaq 5 or 6 times since Sunday looking for the next video. Glad to see it made it on here. I'm in the middle of rebuilding my crawler jeep Yj, and have a lot less knowledge on the matter than y'all, but use yalls stuff as an inspiration to trying new stuff.

Dang that was some good pouring thanks for the shout out

Love the videos guys. Keep them coming. Always looking for yalls videos when i pull up KZfaq. Shock towers came out awesome👌🏼

Just found your channel. Great Video! Alex you are the spitting image to a young Chris Cornell.

We use them on site mixing trucks for doing highways in Illinois. Bridges the ground with that rebar you could’ve use the copper they sell it at home improvement stores.

Cant Wait to see what comes out of the shop!

I enjoy watching your videos since I never know what you 3 are going to be doing in your videos

Dang I have been waiting for your video. You guys are funny and knowledgeable.

good stuff !!!!

Love your guys videos! Your doing cool stuff with that JK. After seeing Cayleb’s Jeep though your killing me with all that clutter in the engine bay. Clean it up! Haha

Passenger can adjust rear shock rebound in real time , awesome 😂

I. Need. Longer. Videos. I love the content. You all crack me up! Please make longer videos.

Awesome content!!

Trailer wheel wells would work great to replace an cover that area up an look good to an pretty easy to set up since there so simple!

You guys buil awesome jeeps 👍

Really Nice work boys! Those rear hoops are awesome! Looks like you might have some sheet metal work to do in the near future. Or Plexi Glass so the rear passengers can stare down at the tires ;)

It’s coming along SAWEET!! 🤙🏼🍻🤙🏼

You guys look baked AF. Lol

Little trailer fenders. Quick and easy way to cover the hoops

Looking good. But if you don’t mind a suggestion, you might wanna rotate the rear upper shock mounts 90 degrees. This will let the reservoir hose come off the front or back and won’t be sticking into the rear seat area. Would be a quick and easy fix. Also make it easy to mount the reservoir to the shock hoop.

Cover the shock hoops with sheet metal and weld them to the tub, and for style points add a couple bead rolls.

Welding gooood..

You should buy phosphoric acid with zinc if you buy the por 15 metal prep works great

Use metal motorcycle fenders and sheet the sides for those rear shock hoops just find some wide enough.

I wish my 2013 2dr JK Rubicon was set up like like yours like the grey or the red one love the suspension set up im trying to find the best bang for the bucks 3" lift kit to go with any thoughts

You should’ve welded a plate to the frame and then welded your pipe to the plate. Nice welding though. I hope you covered up the chrome on the shocks before welding

Nice Job Caleb!

Was that the shocks clicking at the end? Or was that the skid loader boom slowly lowering lol! Looks really good tho! Huge inspiration here!

I’m in the process of 1 ton swapping my jk and I’m looking to go ahead and swap over to coilovers. I’m looking to do pretty much the exact same setup. What size coilovers did you go with?? Thank you.

Can y’all give an overview of your axles notice y’all don’t have a front truss and I like it.

Are those 14 or 16 inch coil overs

When you boys fabbed up the hoops how did you find the angle to mount the coil overs

Gucci🙌🙌🤟🏻

Move the battery behind the driver seat.

What flares do you guys have on this?

Spray foam and flex seal tape it’ll do away with that hole .

Set them hard. And drive it and tune the softer till your happy with how it handles in the corners. Thats high speed tuning. And low speed ya wanna some resistance. So ya not topping rhe shock out and with put smashing the bumps to hell.

Do you guys make your own beats to you videos

Make Brady work some over time so that shop will get done faster 😆

Looks like everything clears minus the rear tire is shoved into the fender so hard the tire is deformed 😂 lol love it!

Why do you guys like shock hoops so much?

Get bump stocks on the back

America 🇺🇸💪🏼🤙🏼🔧🔩

Hey guys I'm going to DM on IG My Nephew's page who's also a owner of fabrication shop in AZ. Pro Drifter building race cars top to bottom. Maybe he can hook you up with some of his sponsors! Definitely would be able to help out with small ideas for small issues. Not going to put up another creators channel on your channel. 😊 Even watching commercials for you! Stay blessed! Your Wendy's gal! 😎❤️🤙