Рет қаралды 53,604
Recently I posted a video of my Kit Shed build and I had a lot of questions and requests for a lessons learned style video. Keep in mind, this does not include the slab, I paid a contractor to do that. It was a lot of hard work abut I thoroughly enjoyed the process and I'd do it all again.
This video talk is based on my experience with the Kit Shed build. There are many ways to go about projects. You decide what is best for you and your application. Do your own research and be responsible for your own risk management. So here it is.
The Shed - 20 m x 7m x a height of 4m. Portal frame/ Colour Bond walls and roof. I won't promote the Shed Manufacture - They don't deserve it based on their post sales service and fault resolution efforts 9or lack of it).
Tools - Basic list (I bought a lot of my specialist tools second hand, cheap)
- Tape Measures. Long 30m (length of building at least) and a smaller one say 8m.
- Builders Square/s (Large and small)
- String line
- Clamps
- Tie Down Straps or bracing
- Battery Drill/ impact drill and spare batteries
- Hammer Drill for concrete
- Sockets and Spanners
- Tek Screw drivers and spares
- Marker Pens and pencils
- Box cutter
- Spirit level
- Tin snips or metal shears
- Metal file (Fine)
- some sort of vice fixture
- Tarpaulins or cover material to keep tools dry.
- Workstand
- Ladder
- Crow Bar
- Plumb Bob or Laser Level
- Holes saws for gutter downpipes and door lock sets.
I hope this all helps. The kits are like a big Mecanno set.
Regards
Scott