DIY Larp Scabbard

Рет қаралды 12,645

3 жыл бұрын

Make a Larp Scabbard for cheap. Leather scabbards are very nice, and very pricey. Learn to make your own!
Help Support me on Patreon!
/ livinganachronism
Instagram: / livinganachronismofficial
Materials (items in parenthesis are multiple options, not all required) :
Liner (Fleece, old shirt, etc)
Body (cardboard, corrugated plastic, craft foam)
Cover (pleather, paint)
Adhesive (Spray Super 77, contact cement, PVA glue)
Needle and thread
Knife and scissors
Other Joiners (staples, brads)
Stiffener (Yard stick, driveway markers, cardboard, fence palings)
Harness (Rope, leather, old belt)
Steps:
04:20 1. Prepare body to proper length, if desired, create template or fold and cut to shape of sword
(Keep as many lines straight as possible, only doing the geometry of the point)
06:11 2. Place sword in liner material and sew around it, cut away excess.
07:20 3. Sew lining to cover
10:41 4. Glue Lining to Body
11:03 5. Determine belt loops and sew to cover if desired
6. Determine stiffening or other such work on body
12:43 7. Glue cover to body
13:13 8. If desired, clamp all layers together in some way around edge (glue, brads, staples, sewing), other decorations
----
-"Nowhere Land", "Wonderland", "Mjonir" by Alexander Nakarada | www.serpentsoundstudios.com
Music promoted by www.free-stock-music.com
Attribution 4.0 International (CC BY 4.0)
creativecommons.org/licenses/...

Пікірлер: 33

@themagikarpmaster4105 2 жыл бұрын

I made a knife sheathe like this back when I was in college using corrugated cardboard and denim which I sewed together rather than gluing. I then used it as my scuba knife sheathe and while the cardboard is weak to water, the fabric can hold it together so while it's not properly waterproof it can survive being submerged for 30-60 minutes during a dive and when it dries it forms to the blade kind of like leather.

@velazquezarmouries Жыл бұрын

It works better with pu leather and gray cardboard that's how I make the scabbards for my mild steel trainers

@fauxmarmorer9544 2 жыл бұрын

Tip for the "craft foam" (so used to calling it what it is, Eva foam, craft foam feels wrong), anyway you can get 6×2 foot rolls for roughly 10-16 dollars plus shipping from TNT cosplay in whatever thickness you prefer, for this I'd reccomend a 4-6mm, I'm preparing to make one for myself. Also get an extendable hobby knife and a good sharpener, Kershaw is what I use, sharpen it after every cut, a heat gun is a must if you want that leather texture put directly into the foam using the foil method no you cannot use a hair dryer, if you've got a Dremel great that'll help you blend seams and round over edges to just add that extra touch to your finished piece. And then you have the freedom to paint and weather it to your content, and someone asked yes you should be able to rivet foam depending on density though I'd reccomend gluing it (contact cement is best) then adding a faux rivet on top. This is my hobby I obsess over so that's why it's so long, hope it was helpful to somebody if not our lovely boy on screen.

@lextheap1638 Жыл бұрын

Pretty cool build. Might try it as an inexpensive addition for my ren fair outfit this year .Dont know if you mentioned it or not, but when gluing the cardboard to the fleece, you can wrap your sword in plastic to avoid damaging your sword

@Lorienhal 2 жыл бұрын

Most definitely would like to see a foam scabbard made! I have a LOTR sword collection and need a scabbard for my Sting replica, and my Glamdring Replica

@bretlemieux2489 2 жыл бұрын

My half orc uses an axe and a nerf gun in my larp lol

@beksc9209 2 жыл бұрын

Neat! I sent your "First LARP Sword" video to a couple friends who are planning on buying a couple LARP swords. Once they've gotten theirs, I'll have to ask them if they want to watch this video as well.

@PocketKanin 2 жыл бұрын

With things like this looking at the cosplay community is always a big plus! If you have a little extra money to spare, Worbla is a good choice for a body. 💙

@oneofthelast1408 2 жыл бұрын

Every one loves DIY sword craft brother Kramer good work.👏

@RainMakeR_Workshop 3 жыл бұрын

PVC pipe scabbards are popular in the cosplay scene.

@williamhughes9559 Жыл бұрын

I made a couple of scabbards from corrugated cardboard and felt. My swords were made of wood. I just cut open a large box, laid down the sword, sketched out the shape around the then tapped it together with Gorilla Tape. I took the felt and placed it over the scabbard with the sword inside. I then took a large hot glue gun and applied the glue to the scabbard an inch or two at a time stretching the felt and smoothing down as I went. When the felt was scabbard was completely covered it then painted it black. The felt I had was bright red with silvery highlights (not the look I wanted), so I painted it with black acrylic paint. The swords was a little large to carry on my waist so I took an old belt, cut it in half, hot glued and stapled the cut ends to the top and bottom of the scabbard and now have a back hanger

@Mylenapony 2 ай бұрын

Thank you I modified this tutorial to make a lazy scabbard out of cardboard and duck tape

@corbyrobinson3640 2 жыл бұрын

I would love to see a craft foam version of this.

@thenerdfaraway 2 жыл бұрын

This was a going into my how-to playlist! I am a prop mistress in my spare time and there is a lot of good information here!

@ninaschust3694 3 ай бұрын

So cool ❤

@EmilyRafferty 2 жыл бұрын

Just found your channel and already totally obsessed 😍

@hollyingraham3980 Жыл бұрын

If you need a large sheet of paper for the pattern, buy that cheap holiday paper now on the roll. The backside is pale enough to draw on, and the roll is long enough for a zweihander. Great for long clothing pattern pieces, too.

@LivingAnachronism Жыл бұрын

Great idea!

@DollopussD Жыл бұрын

I used an old camera strap, cardboard and duck tape but the result was pretty passable 👍

@Bb24138 3 жыл бұрын

I made myself a back scabbard sort of like shade from shadiversity's design out of thermal plastic, fake leather and some fur

@LivingAnachronism 3 жыл бұрын

Awesome! I want to make a larp Shabbard as well

@Bb24138 3 жыл бұрын

@@LivingAnachronism it works pretty well

@yes43434 3 жыл бұрын

thank you

@allende9506 3 жыл бұрын

your hair looks splendid in this video!

@LivingAnachronism 3 жыл бұрын

Thank you. Oil based pomade ;)

@ThePageTurnerPT Жыл бұрын

So, in my preparation for the next Reckoning LARP event, I got myself my first larp sword. SO I will be back here to assist in me building a scabbard for it! Huzzah! It's also a mytholon weapon but I don't know if it's a hybrid one or not. If it is, I'll let you know so you can snag one yourself

@vyguardelite7874 Жыл бұрын

Thank you for saving my Renaissance Festival! Lmao

@imjusthere9006 3 жыл бұрын

Could always wrap the foam in foax leather

@nakozan5521 3 жыл бұрын

I'd love to see a video of you doing this with the painted craft foam you were talking abour, would we still be able to add thread and rivets to give it a more leather like look? Great video, thank you for the content!

@EmilyRafferty 2 жыл бұрын

This is late and random lol but I use craft foam to mimic leather and I use rivets thread etc looks totally real :)