DIY LAWN STRIPING KIT under $15

  Рет қаралды 2,525,990

Lakehouse Lawn Care

Lakehouse Lawn Care

3 жыл бұрын

Lawn stripes will make your grass stand out and add curb appeal to your house. In this video, I explain how lawn stripes are created, give you options for striping your lawn, and show you how I built my own DIY striper for less than $15.
Toro striping kit: amzn.to/3k33lxC
Cub Cadet striping kit: amzn.to/3m3OUda
Montree striping kit: amzn.to/31wInho
John Deere 48"/54" striping kit: amzn.to/3tW2oKC
The views expressed in this video and description are solely of my own. I cannot guarantee against improper use or unauthorized modifications of this information. Lakehouse Lawn Care assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Lakehouse Lawn Care recommends safe practices when working on machines and or with tools seen or implied in this video. Due to factors beyond the control of Lakehouse Lawn Care, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Lakehouse Lawn Care.

Пікірлер: 1 700
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
🔴 Thank you all for watching and commenting! If you haven’t yet, please don’t forget to Like and Subscribe. Here’s the link to a video that shows more results of this striping kit in action. kzfaq.info/get/bejne/guChd5dpxtWphp8.html
@matthewgrimes8292
@matthewgrimes8292 3 жыл бұрын
Thank you for the video. How much weight do you suggest adding in the tube? Planning on using sand.
@gregmori5161
@gregmori5161 3 жыл бұрын
Thank you for the details to make the stripper, just finished mine and did my first stripping. Looks great! Thanks again.
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Hey Matthew! It’s my pleasure. Thank you for watching. I’m not exactly sure the weight, but I’d fill it up with sand and it will be just right.
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
That’s awesome, Greg! Enjoy those sweet stripes and thanks for watching.
@jaspermarshall3973
@jaspermarshall3973 2 жыл бұрын
Sorry to be so off topic but does any of you know of a trick to get back into an Instagram account..? I was stupid lost my password. I appreciate any tips you can offer me.
@mrpeanut1381
@mrpeanut1381 3 жыл бұрын
Welcome to the dad section of KZfaq.
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
😂 100% accurate.
@Zerowolf760
@Zerowolf760 2 жыл бұрын
🤣🤣🤣🤣🤣🤣
@BVonBuescher
@BVonBuescher 2 жыл бұрын
DadTube… full of lawn care tips, terrible puns and stories that essentially have no beginning, middle, or end as told by those leading lives of quiet desperation in the suburbs of America
@lakehouselawncare1755
@lakehouselawncare1755 2 жыл бұрын
😂 you are correct my friend!
@Jca101692
@Jca101692 Жыл бұрын
Gotta beat the neighbors lawn... dinklebergggg
@themaineadventure4687
@themaineadventure4687 3 жыл бұрын
Add a third eye hook in the middle of the PVC with a string coming up to the handle to pull up on when backing up.
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
That’s a good idea! Thanks
@mscar9104
@mscar9104 3 жыл бұрын
Who were you in another life?
@EricEllenbrook
@EricEllenbrook 3 жыл бұрын
I did exactly this before I saw your comment. It works really well.
@kareemjohnson8059
@kareemjohnson8059 3 жыл бұрын
Buumbaclot..Good fkn idea
@dafridgegaming72
@dafridgegaming72 3 жыл бұрын
Hi. What size eye bolts did you get?
@rangermcdanger1971
@rangermcdanger1971 2 жыл бұрын
I live in an apartment. I have no grass to maintain. Yet I willingly watched this entire video. Well done YT algorithm
@lakehouselawncare1755
@lakehouselawncare1755 Жыл бұрын
😂 well thank you for watching my video.
@bobcranehomemovies
@bobcranehomemovies 11 ай бұрын
I was at a Dave mathews concert in 2003, graduated high school in 2005 - I was too cool for anything between 2007-2012, drank beer and happily lived in a bachelor's pad until 2019- now I'm searching this on KZfaq...
@seventheoutlawspits
@seventheoutlawspits Ай бұрын
😂I’m weak asf 😂 😂😂😂😂 #SevenTheRev
@otepay
@otepay 22 күн бұрын
Next year me and you will be out of high school 20 years brother…….TWENTY years…..I’m here right beside you with some Nike monarchs trying to get stripes in my yard……I’m gonna have a beer for you and me both tonight bro, we’re old 😩😩😩😩 🍺 🍻 cheers my dawg
@michaelsims4478
@michaelsims4478 12 сағат бұрын
I graduated in 2005 myself, the real question is what kind of smoker do you have ? 😂
@Wondering_Weasel_Foot
@Wondering_Weasel_Foot 11 сағат бұрын
@@otepayI’ll have one tomorrow when I do my yard, I’ll be wearing my tore up Abercrombie jeans, that i paid to look like I got caught up in my mower!
@Wondering_Weasel_Foot
@Wondering_Weasel_Foot 11 сағат бұрын
@@michaelsims4478reqteq bullseye, big green egg (knockoff - charbroil version ) and my neighbors old charcoal grill…. The white air monarchs are on there way apparently!
@sugaradaddy
@sugaradaddy 2 жыл бұрын
The previous owners of my house left this in the shed. I thought it was used to prop his canoe. Now I know what its for! Awesome!!! Thank you!!!
@lakehouselawncare1755
@lakehouselawncare1755 2 жыл бұрын
Now way!! 😂 that’s hilarious. Well enjoy your lawn stripes, Dennis!
@davidtretter604
@davidtretter604 3 жыл бұрын
Neat idea. If you want to make backing up easier add another loop bolt in the middle and top of PVC. Put a hook on the other side of rope and make rope as long as from PVC to top bar. Lift hook which will lift PVC when needed.
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Great idea, David! Thanks.
@deegupton
@deegupton 10 ай бұрын
Finally built mine today after finding this video a few months ago! It was a little more tricky, but it works and my yard looks great! I’m a chick obsessed with her lawn!
@chiprhine9740
@chiprhine9740 11 күн бұрын
😂 im a chick that does all the yard work. I take pride in my yard, and my husband is not allowed to work in my yard, lol
@deegupton
@deegupton 11 күн бұрын
Yes ma’am!! My wife knows she’s not allowed in the front yard! Respectfully of course! 😂😂
@wingnut5730
@wingnut5730 3 жыл бұрын
I did this. Bad ass. My neighbors hate it. Haha!
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Love it!!! I’m glad you are having great results. Thanks for watching and commenting!
@abm2617
@abm2617 3 жыл бұрын
Screw them as long as you are satisfied!!!
@fredobanny8842
@fredobanny8842 3 жыл бұрын
I'm sure they hate your lawn looking super cut and their looking boring lol
@YooToobz
@YooToobz 3 жыл бұрын
Dominating 💪🏽
@JoeR203
@JoeR203 3 жыл бұрын
The light reflecting in your eyes was hypnotizing me. Now I want to go mow the grass......even though I live in a condo complex.
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
😂😂 this is hilarious. Thanks for watching and for making me laugh, Joe!
@JoeR203
@JoeR203 3 жыл бұрын
@@lakehouselawncare1755 No problem. :-)
@misterle7026
@misterle7026 3 жыл бұрын
an alternative to lock nuts.. you can use 2 regular nuts and apply thread locks. Don't use super glue, use PCV adhesive sealer
@Guotshol2024
@Guotshol2024 Ай бұрын
I built mine today. It costs me $27 in Chicago. Thanks for the video sir
@jerrybrown8416
@jerrybrown8416 2 жыл бұрын
I appreciate your content. Stumbled across this video a few days ago, and I made my own striper using your build and my yard came out beautifully!!!
@lakehouselawncare1755
@lakehouselawncare1755 2 жыл бұрын
Thanks for watching and commenting, Jerry! I appreciate it. Enjoy your beautiful lawn stripes!
@TAMELESSTGR
@TAMELESSTGR 3 жыл бұрын
Man this worked great and really made those stripes stand out! Thanks for the tip and build list.
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Awesome!! I’m glad to hear you enjoy your striping kit. Thanks for watching.
@Evenyes32
@Evenyes32 3 жыл бұрын
Wow what a great idea, easy too! I made a leveling tool last weekend and now with this my lawn is going to look great this year. Thanks.
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Evert, thank you for the kind word! I appreciate you watching and commenting.
@michaeloestreicher7627
@michaeloestreicher7627 3 жыл бұрын
Thank you for posting this video. Built it this morning and looking forward to seeing the results when I mow the lawn later today!
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Thanks for watching, Michael! Enjoy those stripes.
@jasonenyart1773
@jasonenyart1773 3 жыл бұрын
This was an excellent video. I have been looking to make a striper and this was the most simple one I've found. I am a special educator and take notice of how individuals present information. You have an incredibly calming way of teaching. The viewer is put at ease and it is easy to comprehend the content you provide. Excellent work and I appreciate this.
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Wow! Thank you so much for your kind feedback. I am a Physical Education/Health teacher as well. I appreciate you watching and commenting. I hope you have a great finish to your school year!
@monicawashington1901
@monicawashington1901 3 жыл бұрын
I agree!
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
@@monicawashington1901 Thank you, Monica!
@thescout4313
@thescout4313 3 жыл бұрын
Get a room
@BigBand1942
@BigBand1942 2 жыл бұрын
@@thescout4313 dude, Really?
@umbreonix
@umbreonix 3 жыл бұрын
This looks really good man! Cheap but well built. Great instructions too!
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Thanks!! I appreciate you watching.
@holibradley7060
@holibradley7060 10 ай бұрын
I’m a mom but I love mowing the lawn and I am so excited to try this so I can get those lawn stripes I’ve longed for!
@lakehouselawncare1755
@lakehouselawncare1755 10 ай бұрын
Thanks for the comment, Holi! Enjoy your lawn stripes!
@crunchytaco7734
@crunchytaco7734 9 ай бұрын
I watched your video last week, made my new lawn striper Friday night. My lawn look good before, now it looks even better with this new attachment. Thanks for the tips on making it. It cost be 28 dollars. Great video.
@gars1074
@gars1074 10 күн бұрын
Thanks for the great video and fantastic project. I just cut my grass after building and attaching the striper- and it works great! My lawn looks terrific! The stripes are just like at the gold course. I used 4 " pvc pipe and didn't know if it would be too heavy, but I simply popped the last cap on without glueing it to see how it felt. I took some pea gravel out until I found the right weight . Very easy and inexpensive project.
@vandit0o0o
@vandit0o0o 3 жыл бұрын
Made one off your instructional video last year. OMG, what a difference. Best stripes on the block. Thanks a bunch.
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Awesome!! Glad to hear it!
@ronwheeler8590
@ronwheeler8590 3 жыл бұрын
That was like the easiest tutorial I have seen. Definitely gonna try that!
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Thank you, Ron! I appreciate it.
@tnruzum
@tnruzum 3 жыл бұрын
@@lakehouselawncare1755 ibi
@alisam982
@alisam982 2 жыл бұрын
Started my own lawn care company and I am so lucky to have found this video. I m buying my equipment right now ....
@lakehouselawncare1755
@lakehouselawncare1755 2 жыл бұрын
That’s awesome, Alisa! Good luck with your business and thanks for watching.
@wendellgreenidge3362
@wendellgreenidge3362 2 жыл бұрын
I always thought that’s what the flap on the back of my mower was for, thanks for this information
@tjj5178
@tjj5178 3 жыл бұрын
I will definitely make one like this when I have a house with lawn and able to afford a lawnmower......great idea...
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Thank you for watching, TJ!
@nointro
@nointro 2 жыл бұрын
I used your design with some modification. I used a smaller diameter pipe, filled with concrete, connected by spinners on the ends to allow it to roll behind vs being dragged and I wrapped the whole thing in a gripping tape to help with the rolling. Works amazingly well!
@lakehouselawncare1755
@lakehouselawncare1755 2 жыл бұрын
That’s awesome!! Great idea and thanks for sharing.
@nointro
@nointro 2 жыл бұрын
@@lakehouselawncare1755 anytime!
@richturner2482
@richturner2482 2 жыл бұрын
I tried this today and wow what a difference! Thanks again for your knowledge!!
@lakehouselawncare1755
@lakehouselawncare1755 2 жыл бұрын
Awesome!! Love to hear it. Have a great weekend, Rich!
@trivu3825
@trivu3825 20 күн бұрын
I went a step further and added another eyebolt with nut in the middle of the pvc and use a 28-48" adjustable bungee strap with hooks one end to the pvc and the other to the mower handle. When you need to back up or don't want to strip a certain area, just pull the hook up to the handle and you're good.
@chrisaustin23
@chrisaustin23 3 жыл бұрын
Last year I rigged up a piece of conduit and zip ties. Surprisingly I did notice some results. Then I saw you create your own last year, and I'm DEFINITELY doing this this year. PVC makes so much sense.
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
That works too, but I’ve had good results with this design. Thanks for watching, Chris!
@joejones2847
@joejones2847 2 жыл бұрын
Boat rollers work too if you happen to have some laying around
@motorcitygrassman30
@motorcitygrassman30 3 жыл бұрын
the best and easiest tutorial I've seen yet.
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Thank you!
@trojan7593
@trojan7593 2 жыл бұрын
I have always loved the look of the baseball infields...used to cut the lawn twice, but at different angles. This makes great sense and can't wait to get the PVC into action!
@lakehouselawncare1755
@lakehouselawncare1755 2 жыл бұрын
I have always loved the look, too! Thanks for watching.
@devishernandez1976
@devishernandez1976 Жыл бұрын
Did you do it? How'd it go?
@nancydavis8552
@nancydavis8552 2 жыл бұрын
Thanks for posting, I’ll be doing this for my mower when the spring comes.
@Jeff-ik3hn
@Jeff-ik3hn 3 жыл бұрын
I use your instructions last year and made a modified version for my riding mower and filled the PVC with cement it works great thanks for the tip
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Jeff, I’m glad to hear you’ve had success with your striping kit. Thanks for watching!
@thelawnbeast1644
@thelawnbeast1644 3 жыл бұрын
Genius! That’s awesome man. Can’t wait to try it out. I’ve always been hesitant to spend $100 on a stripe kit. Thank you for showing us this!
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Thanks, buddy! I didn’t want to drop $100+ either.
@peterobara3040
@peterobara3040 2 жыл бұрын
Yeah, I don't understand why these things are so expensive. Its like a third of the cost of my brand new mower!
@chuckgilbert2035
@chuckgilbert2035 Жыл бұрын
Nice, cannot believe I did not know that the strips were grass bent in different directions. Retired and now living in Florida. Now that I do not have to run a business I can get into lawn work.
@t.b.1596
@t.b.1596 3 жыл бұрын
You are a genius! I love it when people are creative and think outside the box!
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Haha far from a genius, but thank you! I appreciate you watching my video.
@t.b.1596
@t.b.1596 3 жыл бұрын
@@lakehouselawncare1755 Well, I can tell you that you put together a fabulous video for us "Perfectionist on Lawns"! I'm going to Home Depot tomorrow!!!
@GRJCLyon
@GRJCLyon 3 жыл бұрын
I just came from Lowe's a few minutes ago. Looks like I'm headed back out to Home Depot now. LOL!! Excellent idea. Thank you for the video.
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Thank you, buddy! Enjoy those stripes!
@pblask6451
@pblask6451 2 жыл бұрын
I was just thinking of making something that would accomplish this! Thanks for saving me the trial and error part of the project!
@lakehouselawncare1755
@lakehouselawncare1755 2 жыл бұрын
My pleasure! Thanks for watching.
@italianballbreaker
@italianballbreaker 3 жыл бұрын
Awesome idea that I’m gonna use. Glad you posted it. I’m putting down sod in a couple of weeks and it’s gonna look great with stripes.
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Thank you for the kind words and for watching! Your striped new grass will look great!
@lawrencemixonjr7897
@lawrencemixonjr7897 2 жыл бұрын
Just made AND used mine today! Worked great. Thank you 👏🏿👏🏿👏🏿
@lakehouselawncare1755
@lakehouselawncare1755 Жыл бұрын
Awesome!! Thanks for the comment, Lawrence! Enjoy your lawn stripes.
@fredclayton6125
@fredclayton6125 2 жыл бұрын
Great video…I built my own striping bar based on these instructions. I had to pivot slightly because my rear wheels are much larger than the mower used in this video. So my PVC hangs off the back in between the two wheels with about 1/4 inch space on the sides, and lays about 2 inches back from the debris flap. Anyway, my lines look awesome, thanks for the tips!
@lakehouselawncare1755
@lakehouselawncare1755 2 жыл бұрын
Thank you for watching and commenting, Fred! I’m glad to hear you are having some awesome results!
@BudgetLawns
@BudgetLawns 3 жыл бұрын
Makin' it look easy brother! $15 instead of $150 is right up my alley, Great little DIY project for folks 👊
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Thank you, brother!! Definitely a budget lawn move. Thanks for watching my friend!
@mythoughts.....4787
@mythoughts.....4787 2 жыл бұрын
I have a Raptor Hustler Zero Turn 50" I used carriage bolts and fastened a 2x2 angle to the rear of the deck. Surprisingly the square hole are already there. I then fastened a 36" nylon broom to the angle with lag screws. You only need a 36" broom to fit between the width of the tires. Then the tires flatten that part of the grass. First adjust the holes on the angle, to the deck so the broom extends about 2 1/2" below the deck. This allows me to brush the grass regardless of the height adjustment. I've had it on for over 3 years works great and never a problem. I'm a nut and it's perfect, perfect, perfect. It's hidden, clean install, you can't even see it. Prior to that I tried everything imaginable, they either wore out and broke or never worked at all.
@chiprhine9740
@chiprhine9740 11 күн бұрын
Thankyou for this awesome diy video. ❤️
@sherylanntorres577
@sherylanntorres577 3 жыл бұрын
Wow, really cool and I loved that I now know how it's done. And now to figure out how to make a checker board! Thanks for posting
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Thank you for watching!
@gregorytaylor339
@gregorytaylor339 2 жыл бұрын
Checker boarding is just completing the process in 2 directions kinda like a cross cut if you know what I mean,
@MikeHaddadLawnAddictions
@MikeHaddadLawnAddictions 3 жыл бұрын
One of the best diy kits I’ve seen
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Thank you, Mike! I appreciate it.
@brandonjamills
@brandonjamills 2 жыл бұрын
This is great. Simple, to the point, and quick. Thank you.
@lakehouselawncare1755
@lakehouselawncare1755 2 жыл бұрын
Thank you, Brandon!
@gamecocks1150
@gamecocks1150 10 ай бұрын
I watched a few videos before this and i have to say you did an incredible job! Can't wait to make the neighbors sweat. Subed and looking forward to more content.
@assestokick
@assestokick 2 жыл бұрын
Nice video! I see that the PVC you used was made at Charlotte Pipe Foundry. I worked at WH Rogers sheet metal and iron works in Charlotte, and our company spent almost every weekend there doing some kind of maintenance work. A very hot place to work and they made all kinds of pipe. Definitely not a easy job, but it seemed to be a great company, and so was WH Rogers also. Again, awesome video my friend. Mount Holly NC :)
@bobfognozzle
@bobfognozzle 3 жыл бұрын
I just finished building one....$10...I found a piece of 3“ PVC. Now I am waiting for the grass to grow so I can test it.
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Awesome!! You will be laying down sweet stripes in no time! Thanks for watching.
@landonmakowski7767
@landonmakowski7767 3 жыл бұрын
How’d it work
@SouthernSilverExchange
@SouthernSilverExchange 3 жыл бұрын
@@landonmakowski7767 yes. Do tell Bob. Howd it turn out brother??
@tiffenwilliams872
@tiffenwilliams872 2 жыл бұрын
👀
@greenearthblueskies8556
@greenearthblueskies8556 2 жыл бұрын
@@tiffenwilliams872 😂
@joebacarella2829
@joebacarella2829 2 жыл бұрын
I like it, I was worried about backing up thought, but for $15, I am gonna make one for sure, thanks for sharing.
@MrFaulk-pn9ef
@MrFaulk-pn9ef 3 жыл бұрын
Kyle! Thanks so much for the video. Just as you promised. I wait with anticipation to use my “Lakehouse Striping Kit”...would love to share the results with you! Looking forward to more of your content brother. 👊
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Jay, my pleasure, buddy. I look forward to seeing your awesome stripes!
@joeguilfoyle1922
@joeguilfoyle1922 3 жыл бұрын
Great idea!!! I'd fill mine with concrete just incase the end caps fell off. And I like that 3rd eye hook idea for backing up. This is brilliant. Thank You.
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Thank you! Yes, concrete would be perfect.
@AgentOffice
@AgentOffice 2 жыл бұрын
Heavy is better
@tim0r0h
@tim0r0h 2 жыл бұрын
I'll be doing this!! Brilliant video - best design around I reckon, everyone else has their's rolling.....think this design pushes the grass flatter!!
@teebee4992
@teebee4992 2 жыл бұрын
Could the weight of grass clippings in the bag plus dragging a concrete filled PVC pipe around cause undue strain on the mower self-propel function thus ruining the mower......
@joeguilfoyle1922
@joeguilfoyle1922 2 жыл бұрын
@@teebee4992 good point.
@sm1353
@sm1353 3 жыл бұрын
Not sure how I ended up here but I'm glad I did! Great video!
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
😂 I’m glad you’re here! Thanks for watching, buddy!
@fabsrobles
@fabsrobles 21 күн бұрын
Just made mine! But my piece of pvc cost me 25 at my local hardware store 🥵 Used it for the first time, yard is looking crispy! Still cheaper than a striping kit!
@zshark365
@zshark365 8 ай бұрын
I don't have a lawn, but I learned something new I was always curious how the stiripes on fields and lawns were made. Thanks for the info and great vid.
@lakehouselawncare1755
@lakehouselawncare1755 8 ай бұрын
Thank you for watching and commenting!
@MFSINPSA
@MFSINPSA 3 жыл бұрын
As a former golf course superintendent, I have to say brilliant work.
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Thank you, Mike! I appreciate your kind words.
@MFSINPSA
@MFSINPSA 3 жыл бұрын
@UCNCcuYnLc8g_I--PTj3-kUQ because i went to school to study growing grass and getting that striped look without expensive mowers is hard and this is a solution. Instead of showing everyone you are a tool, just scroll by next time.
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
I already deleted the comment from them.
@MFSINPSA
@MFSINPSA 3 жыл бұрын
@@lakehouselawncare1755 thanks man. Have to love the internet. When even positive compliments get attacked. 😁
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
@@MFSINPSA 😂 I just make videos to try to help people out, and I get attacked in the comments frequently. Some people obviously just have bigger problems that have nothing to do with us.
@artrosco1973
@artrosco1973 Жыл бұрын
I'd like to know who thought it was 2 kinds of grass....
@cmendoza1094
@cmendoza1094 2 жыл бұрын
Always wondered how my Toro was able to leave nice stripes. I would cut the grass in a pattern just because of OCD and make sure the coverage was complete. But it would leave these nice stripes, it has a plastic skirt that loops into a cylinder at the point it touches the grass. And it's super still, like the skirt you have on your mower, but with a thick round bottom. Like a small PVC pipe, I always thought it was just to keep rocks from being shot at your shins. But it did a nice job of striping. I think adding this to one of those grass clipping push rakes would be nice, remove excess grass while stripping the grass.
@chijaylifestyle
@chijaylifestyle 2 жыл бұрын
You have motivated me now. Time to make my own lawn striping kit.
@keithzeykon9428
@keithzeykon9428 3 жыл бұрын
I love you. Thank you so much. Going to lowe's tomorrow!!!
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
😂 thank you for watching! Enjoy your lawn stripes.
@blakebradley6404
@blakebradley6404 3 жыл бұрын
How’d it go did it work
@austinprojects
@austinprojects 2 жыл бұрын
I just made this exact roller. From the economy, prices have changed drastically. For the short pipe it cost me $17, the end caps cost $1.67 each, the pepples cost me $3, the eye bolts cost me $2 each, the harness clamps cost me $2 each, the glue cost me $4, the lock tight nuts cost me 24 cents each, and the lock tight washers cost me 16 cents each. These items were purchased here in Missouri. Still alot cheaper than buying a factory made roller, but this is no longer $15 to make but it still is worth making.
@Floridaman458
@Floridaman458 2 жыл бұрын
It’s the “Putin price hike”
@austinprojects
@austinprojects 2 жыл бұрын
@@Floridaman458 Quotations never mattered more than this lol
@trumptookthevaccine1679
@trumptookthevaccine1679 2 жыл бұрын
Yeah pvc is stupid expensive
@andrewk8636
@andrewk8636 Жыл бұрын
@@Floridaman458 no its the liberal price hike. It was done before putin
@prostreetgsxr
@prostreetgsxr 27 күн бұрын
If you want stripes on your lawn, you need to let your grass grow much taller like 5”. A lot of people talking about stripes never mentioned this.
@KINGKONGVSTREX
@KINGKONGVSTREX 10 ай бұрын
Inflation In Two Years Since This Video Has Been Exponential! Just Went To Home Depot For These Components, $33.00 Build As Of Today 07/27/2023. Still Cheaper Than A Boxed Striper, Thank You!
@toddhare8225
@toddhare8225 3 жыл бұрын
I mounted a soft bristle push broom head on the back of my mower. Works great!
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
That is a great solution as well!
@therombaro
@therombaro 3 жыл бұрын
Genius!
@tbone8ty
@tbone8ty 3 жыл бұрын
attach a stiff brush for dethaching as well, haha jkjk cool idea
@Statikk
@Statikk 3 жыл бұрын
that’s the living definition of “don’t fix what ain’t broke” why buy a new fancy one when your push broom works fine?!
@thisoldnew4544
@thisoldnew4544 3 жыл бұрын
I read that using a brush can scratch the blades of grass and can create a potential for diseases.
@troy5292
@troy5292 2 жыл бұрын
Thanks, I planted my Zoysia really late in 2019 so last year was my first real growing season, and with my Zoysia is just starting its second season and starting the peak growth cycle, and I want to try making one like you did and add stripes to my lawn. One great thing about Zoysia is it grows so freaking thick and dense! I've seen these builds before, but I just saw yours and it was easy and simple. As a minor upgrade idea, you could have added a 3rd eye bolt in the center with a section of rope and a third carabiner on the top handle. Tie a rope from the eye bolt to the middle handle support with enough slack so when you pull the rope to the carabiner on the top handle, it pulls the striper up off the grass and holds it up until you release it. This is just a rough idea. I've not tested it to see if the excess rope would be a risk to catching the blade. If it is I'm sure it would be easy to use a bungie cord or something to keep it up and out of the way. Liked and subscribed too!
@troy5292
@troy5292 2 жыл бұрын
Bah, now that I'm reading, the idea was already below. :-/
@lakehouselawncare1755
@lakehouselawncare1755 2 жыл бұрын
Great idea for allowing you to lift the striper and thanks for watching, Noneya!
@troy5292
@troy5292 2 жыл бұрын
@@lakehouselawncare1755 Thanks...although my Zoysia didn't do a great job striping. It's so dense that it pushes the blades back up. It does stripe, but even with using a 4" PVC pipe and gravel, the extra weight didn't allow the Zoysia to hold a stripe very long - maybe a day or two. If I was someone that mowed every day or every other day it would take, but I don't have the time for that. Thanks again for the video!
@88krazie
@88krazie 11 ай бұрын
Never cared for how Zoysia grass feels under your feet, it is however one of the easiest to maintain, if you like that sort of grass.
@troy5292
@troy5292 11 ай бұрын
@@88krazie There are multiple types of Zoysia. Some are thin bladed and a bit pokey on the feet. I have Zenith Zoysia which is a medium bladed Zoysia, and I find it quiet comfortable to walk on barefoot. I also mow my lawn at 1.5 inches most of the time versus down to 3/4 inch, so that may make it a bit softer. A few of the neighborhood kids that play in my front Zoysia lawn commented they loved playing in my lawn more than any other because it was so soft and felt good to play in and roll around in. Zoysia takes about the same amount of work as most other grasses. I mow about the same frequency as others with nice lawns in my neighborhood. I can go heavier on the root pruning herbicides like Prodiamine or Dithiopyr, and I need to apply fertilizers and such as often as others, although I do not need to put down as much nitrogen as many other types. Weed control is a little easier as once the lawn is dormant, anything not dormant is a weed and it sticks out like a sore thumb. I live in the transition zone and my neighbor keeps a great fescue lawn. I'm not sure why people like fescue so much. Sure, it has a very deep root system so it can go longer without water, but you plant one seed, you get one plant, and over time that plant gets old and gets diseased or dies and leaves a void which makes it easier for weeds to pop up. You can fight this with a pre-emergent, but when you do this, you cannot overseed to fill in these holes, and if you do need to overseed, you also have weeds growing in at the same time as the new seed. He doesn't put down any KBG to spread and fill in the voids. He mows it with a striping kit, and to most that don't know much about lawn care, the strips look really nice. If you pay attention between mowings, you'll see a fair amount of weed pressure. There' are several spots that are brown where the Fescue has died out and left voids. I put down some Midnight KBG in the first few days of April and do nothing but water it. I used a SunJoe dethatcher which with the dethatching attachment is just an electric power rake, which after mowing down ton 1 inch, I raked and pulled up as much debris as possible. I left the weed root system to maintain the soil structure so the dogs won't make it a muddy mess, and hoped a fair amount of the KBG would establish, which is has. It's buried in a ton of weeds, but it's in place to spread. I'll spray herbicide in late summer to see if the KBG will fill in. If so, I'll put down prodiamine to prevent new weeds over the winter and see how the Midnight KBG goes. I have two dogs that run and play in the back yard, so I'm testing which is easier to maintain with dogs playing, and which is easier to mow. I hate how cool season grasses clump up and stick to the mower deck. My Zoysia doesn't clump like that, and when i have a clean deck starting to mow my Zoysia, it stays clean. Unless the cool season lawn/weeds in the back yard are dry from lack of rain for several hot days, the mower deck is caked with glued on wet grass/chlorophyll, and it dumps grass in bulk here and there as the build up gets too thick. Unless I'm really impressed with the KBG, I'll just take Zoysia plugs and let them spread and take over the back lawn year by year. I don't like other types of grass as much because it feels like you're walking on little clumps of bunching grass. Which is why the kids loved playing in my lawn.
@faithkwiecinski84
@faithkwiecinski84 2 жыл бұрын
What a great and economical idea! Thank you for sharing it with us!
@lakehouselawncare1755
@lakehouselawncare1755 2 жыл бұрын
Thank you, Faith! I appreciate you watching and commenting.
@hmh4206
@hmh4206 3 жыл бұрын
Awesome! I now have a project for this weekend. Thanks for sharing.
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Thanks for watching and enjoy your project!
@troym1970
@troym1970 3 жыл бұрын
This rocks and I appreciate your time
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Thank you, Bobby!
@1180juio
@1180juio 3 жыл бұрын
Great work, you could add another bolt in the middle and a string to pull it up when backing up. Good job I will try that. Thanks
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Thank you! That’s a good idea. I appreciate it.
@JohnBailey-vn8wx
@JohnBailey-vn8wx 8 ай бұрын
Well done, it's not often I'm impressed, but you impress me - well done, well done !
@lakehouselawncare1755
@lakehouselawncare1755 8 ай бұрын
Thank you, John!
@zhelko
@zhelko 3 жыл бұрын
i have the lawn stryper and it works great with my honda but this is a great and affordable alternative i can have. great video, well put together, new sub! your yard and water front look gorgeous!
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Thank you so much for the kind words and for the sun. I appreciate you watching and commenting!
@Floridaman458
@Floridaman458 2 жыл бұрын
To anyone reading this: with the carabiners make sure you get the ones that can lock, I got the spring type like in this video and for some reason when I turn the mower they disconnect from the eye bolts. Strange but it does it very often when I spin the mower. Locking carabiners will fix this. By the way I mounted mine on the EGO electric mower and it works great
@anthonyw2605
@anthonyw2605 2 жыл бұрын
I was wondering if this would work for my EGO. Thanks for the comment added.
@erock1070
@erock1070 2 жыл бұрын
Thavks for this. I use an 80v kobalt mower and wondered if the added weight would hurt the motor
@lakehouselawncare1755
@lakehouselawncare1755 2 жыл бұрын
Thanks for the heads up!
@Anon-ft1yb
@Anon-ft1yb 2 жыл бұрын
Where did you make the holes to mount the carabiners to??
@Floridaman458
@Floridaman458 2 жыл бұрын
@@Anon-ft1yb I drilled two holes 14in apart between the back wheels right above the rubber flap on the bottom of the mower. The rubber flap is 16.25in length on my EGO. My PVC piece is 16in and the eye hooks are 14in apart leaving 1in on each end
@Isajuan12
@Isajuan12 2 жыл бұрын
Thank you for the idea on how to make my own roller I will definitely be doing my own and hopefully it’ll work wonders on my stripping.. I’m stripping but it doesn’t show as much I’m excited to try this out
@fazedylan6832
@fazedylan6832 Ай бұрын
I stripe lawn for a living..Love how simple and effective this is.
@lakehouselawncare1755
@lakehouselawncare1755 Ай бұрын
Thank you! I have used this design for a long time and it is my favorite by far.
@ramirocastro8609
@ramirocastro8609 Жыл бұрын
Great instructions! Will be making mine today
@kingbrooksiv
@kingbrooksiv 3 жыл бұрын
I'm bout to kick some azz on my corner lot! This just made my day! Excellent video.
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Hell yeah!! Enjoy those sweet stripes! Thanks for watching.
@Steve211Ucdhihifvshi
@Steve211Ucdhihifvshi 2 жыл бұрын
Protip. Put a third eye bolt in the middle and tie a rope to the middle eyelet eye bolt. That way when you reverse you just pull the rope up. Also if you dont have lock nuts. Use two bolts and a spring washer in the middle. And id use a washer on the inside of that pvc tube to spread the force out a little.
@roccoluppino5578
@roccoluppino5578 3 жыл бұрын
Thanks for the fantastic idea, I used a 1” x18”lead pipe on the back flap of the mower filled with rocks and it works like a charm!
@roccoluppino5578
@roccoluppino5578 3 жыл бұрын
Cost is $10
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Nice, Rocco! I’m sure that does a great job, too. Thanks for watching!
@kevinrock5942
@kevinrock5942 2 жыл бұрын
Rocco, how did you attach the lead pipe to the back flap?
@SERSportsNetwork
@SERSportsNetwork 11 ай бұрын
Thanks, this was a great video. I like to take care of my lawn and wanted to have stripes but didn't want to spend big money, so this was a great alternative.
@lakehouselawncare1755
@lakehouselawncare1755 11 ай бұрын
Thank you for watching and commenting! Enjoy your lawn stripes!
@clydedrex-uh-lur665
@clydedrex-uh-lur665 3 жыл бұрын
On my way to Home Depot right now!
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Awesome!! If they don’t have the end caps, Lowe’s will.
@jamesgang94591
@jamesgang94591 2 жыл бұрын
On riding mowers you can bolt a concrete finishing brush to the back side of the deck and it'll do the same thing and you won't have to worry about it when backing up. I've had the same one on my Cub Cadet for 6 years, still works great.
@RobWenzel84
@RobWenzel84 Жыл бұрын
That's a great idea, how do you know where to set it so it's not smashed in the ground and not to high up I keep my lawn cut to 3 inches, and I would love to do that I have a few old concrete brooms still look new but I could spare one lol
@acoloradolife5135
@acoloradolife5135 Жыл бұрын
In regards to turning around lift the mower up on the front two wheels till the striping kit is clear of the ground makes it relatively easy.
@jonnyhoetschl5172
@jonnyhoetschl5172 3 жыл бұрын
Super helpful. Made one last year and love it. Thanks!
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Awesome!! Thanks for watching and commenting, Johnny!
@justinmoore2616
@justinmoore2616 3 жыл бұрын
Use a lock nut and also RED 271 THREADLOCKER for a permanant hold.
@roadrailn
@roadrailn 3 жыл бұрын
Yep I’d throw a lock washer in there too
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Good call!
@drago7238
@drago7238 3 жыл бұрын
Thanks for the great music OP. I make love to it now
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
😂 thank you for watching!
@skyisthelimit9951
@skyisthelimit9951 2 жыл бұрын
I love the creativity of striping kit. Thanks for sharing with us.
@lakehouselawncare1755
@lakehouselawncare1755 2 жыл бұрын
Thank you for watching and commenting!
@grasslogic7545
@grasslogic7545 3 жыл бұрын
Awesome vids man! You have really helped my lawn look great
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
I love to hear that! It’s why I make videos. Much appreciated!
@troy5292
@troy5292 2 жыл бұрын
Here is an alternate end cap idea - found this at a big box store "Oatey Gripper 3-in Dia Schedule 40 Plug". They come in various sizes.
@lakehouselawncare1755
@lakehouselawncare1755 2 жыл бұрын
Thanks!
@montrealconnect5768
@montrealconnect5768 Жыл бұрын
Just built one in my basement with all pieces you said to purchase!! Going to fill with sand and mow 2morr!!! Can't wait!!! Thanks bro!!
@lakehouselawncare1755
@lakehouselawncare1755 Жыл бұрын
Thanks for watching and commenting! Enjoy your lawn stripes.
@FiveLongWinters
@FiveLongWinters Жыл бұрын
Thanks for this! Super helpful overview of the various options up front.
@lakehouselawncare1755
@lakehouselawncare1755 Жыл бұрын
Thank you, Nick!
@Shaken_AND_Stirred
@Shaken_AND_Stirred 3 жыл бұрын
I did this years ago, but used PVC end caps and drilled holes in the center of the end caps. You can buy a threaded steel rod that goes all the way through to the other side and bolt it on the end caps. This way it rolls rather than drags. Keep in mind that lawn stripers really only work best on fescue and bermuda grasses. In my opinion, it's not worth the trouble trying to do in on St, Augustine, or similar type grasses.
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
That works, too!
@rameshkaranam
@rameshkaranam 2 жыл бұрын
So you had success with Bermuda?
@Shaken_AND_Stirred
@Shaken_AND_Stirred 2 жыл бұрын
@@rameshkaranam Yes, it will work on Bermuda. Ever notice how golf greens will have those strips also? It just doesn’t work too well with St. Augustine which is everywhere here in the south.
@rameshkaranam
@rameshkaranam 2 жыл бұрын
@@Shaken_AND_Stirred thanks for the response. Let me try this !!!
@Shaken_AND_Stirred
@Shaken_AND_Stirred 2 жыл бұрын
@@rameshkaranam Most certainly. You can’t beat the price.
@TheLawnTools
@TheLawnTools 3 жыл бұрын
Stripes for days 🤤🤤🤤
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Thanks, buddy!
@NoCommentarysweat
@NoCommentarysweat 9 ай бұрын
Can’t wait to try this weekend
@nihilist1680
@nihilist1680 Жыл бұрын
Great advice, now I just need to buy a lawn and a mower.
@kennymitchell6440
@kennymitchell6440 3 жыл бұрын
I just zip-tied a piece of #6 rebar to the flap on the back of the mower...same result
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
👍🏼
@jftuga
@jftuga 2 жыл бұрын
Can you please post a photo of this?
@elosonegro3384
@elosonegro3384 3 жыл бұрын
Man that’s not a bad idea. I’m frugal a.k.a cheap if there’s a way to save count me in. I’ll just add the Toro logo with a sharpie.
@lakehouselawncare1755
@lakehouselawncare1755 3 жыл бұрын
Hahaha My wife calls me cheap all the time. Thanks for watching!
@jackmeoff1056
@jackmeoff1056 3 жыл бұрын
You are not cheap, you are a frugal genious.
@AstronautHarris
@AstronautHarris 2 жыл бұрын
Thank you thank you I just did this to my 20 inch ryobi push mower cost is now 31.00 with military discount but still good deal and lawn looks amazing
@lakehouselawncare1755
@lakehouselawncare1755 2 жыл бұрын
Thanks for the comment, Jordan! I’m glad your lawn stripes are looking awesome.
@4sl648
@4sl648 2 жыл бұрын
I used to run Locke reel mowers in the 1970s through the 1990s. Built in Bridgeport CT and they cut and rolled the lawn into the Original lawn stripes. The drive to the ground was two rollers with a differential in the middle and a dolly wheel in the back between the handlebars. They dominated commercial mowing in southern New England (maybe elsewhere) until the walk behind rotary commercial mowers became popular.
@lakehouselawncare1755
@lakehouselawncare1755 2 жыл бұрын
That is so cool! Thanks for sharing your story.
Quick and EASY DIY Lawn Striper build | Under $30!!
9:58
The LawnDaddy
Рет қаралды 196 М.
How to Make your Lawn Look Like a Golf Course
10:53
Princess Cut Lawn Care
Рет қаралды 640 М.
Тяжелые будни жены
00:46
К-Media
Рет қаралды 5 МЛН
Did you find it?! 🤔✨✍️ #funnyart
00:11
Artistomg
Рет қаралды 121 МЛН
Bro be careful where you drop the ball  #learnfromkhaby  #comedy
00:19
Khaby. Lame
Рет қаралды 41 МЛН
HOW TO GET THE DARKEST GRASS PERIOD!
6:23
LAWN LIFE
Рет қаралды 718 М.
Don't sharpen your lawn mower blades! Do this instead!
11:17
YardBrah
Рет қаралды 1,2 МЛН
Lawn Striping - How To Achieve The Best Stripes In Your Lawn
3:56
Ryan Knorr Lawn Care
Рет қаралды 1,5 МЛН
DLC - DIY Lawn Striper Build
12:27
HandyGuy 2016
Рет қаралды 243 М.
Stripes like this for $29.95 make your own stripe kit
7:13
Olee Poole
Рет қаралды 71 М.
The FASTEST Way to Grow Grass Seed: Pregermination Secrets REVEALED!
7:32
Suburban Acreage
Рет қаралды 1,2 МЛН
🟢 Make your ugly lawn DARK GREEN in 3 days
8:07
Princess Cut Lawn Care
Рет қаралды 728 М.
LAWN STRIPING - The KEY to AMAZING Lawn Stripes!!
9:04
Ryan Knorr Lawn Care
Рет қаралды 704 М.
Тяжелые будни жены
00:46
К-Media
Рет қаралды 5 МЛН