Good information. I saw this gasket on the web and was advertised as having a metal carrier. Thought it may have a metal insert but wasn’t sure. Now I know, thanks.
@IronHorseGarage2 жыл бұрын
Good information sir!!!! Best to stay away from any childish drama, we just don't participate in that stuff at all!!!
@MuscleCityMadness2 жыл бұрын
I'm stearing at this exact gasket in my garage and need to do this. Fingers crossed 🤞
@moparnut62862 жыл бұрын
My preferred trans gasket is the silicone steel core gasket with torque limters built in for the 95and up trucks and its reusable a few times and I like to install a drain or a new pan with a drain for easier service down the road.
@Portuguese-linguica2 жыл бұрын
One issue I keep seeing repeatedly is people keep torquing them to foot pounds and not inch pounds . Hell it was about a week or so giving my nephew a hand doing new valve covers on his 2018 Camry . He tighten them down so much that that the rubber gasket popped out of its snap groove . Told him no They only get 15 inch pounds not he man on . He ended up buying new ones cause they where squashed badly .
@MoparMan-ff8fb2 жыл бұрын
yep . I just tighten them till they just stop and then maybe half a turn . I drive the vehicle for a day come back check to see if the gasket has naturally compressed from the heat and recheck the bolts
@DependableAutoTruck2 жыл бұрын
Another way is go to dealer and buy their rtv for transmissions and don't have to use gasket
@DependableAutoTruck2 жыл бұрын
Use the 1992 518 gasket it is reusable last forever never leak
@scottedmonds78992 жыл бұрын
What is the proper torque for the pan bolts?
@MoparMan-ff8fb2 жыл бұрын
27 foot Lbs or tighten down till they just stop then half a turn ? if you use the regular rubber gasket tighten down till you just start to see the gasket move side ways
@scottedmonds78992 жыл бұрын
@@MoparMan-ff8fb I am using the same gasket you had in the video. 27 ft pounds seems like a lot. The service manual says 150 inch pounds. I just don't want to over torque them.
@MoparMan-ff8fb2 жыл бұрын
the small foot Lbs isint much . 150 inch is fine. I think it equals 12.5 Ft lbs