DIY Macrame Tutorial: Large 6 Petal Flower Using Double Half Hitch and Square Knots! Please see below for materials and written instructions.
Shop my book, Mixed Fiber Macrame, and Fiber Art Supplies (string, rope roving, ribbons, velvet and more) on my website or in my Etsy Shop:
Website: www.lotsofknot...
Etsy Shop: www.etsy.com/c...
Support me directly: ko-fi.com/lots...
Materials:
- 3mm Twisted Cotton String (Natural)
Hey guys! I have an intermediate 6 petal flower pattern for you today. If you are looking for a beginner flower pattern or would like to check out the other flower patterns please click the link below:
Macrame Flower Playlist: • Macrame Flower & Vine ...
Let’s get started.
Set up - Cut 15 pieces of 3mm string, each piece is approx. 6.5 ft (2 meters) long. Please note that after you complete this wall hanging you will have about 16-20 inches (40-50cm) left hanging below your flower.
Petal 1
Use the middle left cord as your filler cord and tie a DHHK working to the right. Using the same filler cord tie 6 more DHHKs working down and to the right.
Using the inside left cord as your filler cord tie 6 DHHKs working down and to the left.
Tie a square knot (SK) with the 4 middle cords. Tie two alt. SKs underneath the first SK. Tie 3 alt. SKs underneath the second row. Tie two alt. SKs underneath the 3rd row of SKs. Tie one alt. SK underneath the 4th row of SKs.
Using the same filler cords tie 6 more DHHKs on the right and left sides of your work.
Using the left cord as your filler cord tie one more DHHK to connect the two sides.
Petal 2
Using the outside left cord as your filler cord tie 11 DHHKs working to the right and in a curve.
Skip the first cord on the left and tie a SK with the next 4 cords. Tie another SK to the right of the first SK. Tie an alt. SK below and in between the first 2 SKs. Tie another SK to the right of that SK. Tie 2 more alt. SKs underneath the 2nd row.
Using the outside left cord as your filler cord tie 10 DHHKs working to the right and in a curve.
Petal 3
Using the same method as Petal 2 create another petal on the right side of your work.
We will create the top half of the middle of the flower. Using the inside cords as your filler cords tie 3 DHHKs on both sides of your work. Using the same filler cord on the left tie one more DHHK working to the right. Using the filler cord on the right tie one more DHHK working to the left.
Petal 4
Repeat the same method as Petal 2 to create another petal underneath it. For this petal start about 3 inches down from Petal 2 and work your way up.
Petal 5
Repeat the same method as Petal 4 to create another petal on the right side of your work.
We will create the bottom half of the middle of the flower.
Using the left filler cord tie 2 DHHKs working down and to the right. Using the right filler cord tie 2 DHHKs working down and to the left. Using the inner left cord as your filler cord tie one more DHHK to connect the two sides.
Petal 6
Repeat the same method as Petal 1 to create the final petal.
Thanks for watching!