DIY METAL MELTING FURNACE USING WASTE OIL BURNER

Рет қаралды 27,355

Жыл бұрын

Project no.123 Diy Homemade Metal Melting Furnace Using Waste Oil Burner
im so glad that this project does it job.
cant wait to cast something useful in the future!
LINKS THAT HAS BEEN USED IN THE VIDEO:
YOU CAN SUPPORT THIS CHANNEL BY BUYING THIS ITEMS.
Machifit MGN12H Linear Rail Block：bit.ly/2WFBoyn
Machifit MGN12 600mm Linear Rail Guide with MGN12H Block: bit.ly/2HT4WVP
Machifit MGN12 1000mm Linear Rail Guide with MGN12H Linear Sliding Guide Block: bit.ly/2FSsVSF
8mm Bore Diameter Pillow Block Ball Bearing: bit.ly/2OJeHX3
7pcs 12mm Shank CNC Lathe Turning Tool Holder Set: bit.ly/2K4VBMy
G1/4-19 13x2mm BSP 55 Degree Tap: bit.ly/2TSVnrB
Titanium Coated Deburring External Chamfer Tool: bit.ly/2OG5HCi
Pillow Block Bearing: bit.ly/2uE97MG
Push-pull type fast clamp: bit.ly/2FQ5k3N
2032mm x 13mm Saw Blade: bit.ly/2QRKYQb
Handheld Copper Pipe Tube Expander: bit.ly/2rWa6pW
SBR20-1200mm linear rail and SBR20UU Blocks: bit.ly/2RiKUIC
SBR16 1000mm Linear Rail and SBR16UU Bearing Blocks: bit.ly/2GIcniW
Drillpro Turning Tool Post Holder: bit.ly/2EUban5
SANOU K12-100 Lathe Chuck: bit.ly/2TextHc
Slide Bearing Block: bit.ly/2RhZe4d
Slide Bearing Block: bit.ly/2Q6K4tU
20Pcs Diamond Coated Core Drill Bit Set: goo.gl/mPZ4B6
Opening Locator: goo.gl/sQmMce
LIKE MY FACEBOOK PAGE / pinoydiybuilds
SUBSCRIBE TO MY CHANNEL / sekaustria
AND SUPPORT ME ON PATREON / sekaustria
Like Share Subscribe for a Weekly Videos
#SekAustria #DIY #Homemade

Пікірлер: 36

@roostercaffeine426 Жыл бұрын

I highly recommend coating the ceramic blanket in some kind of rigidizer and a ceramic coating. Other than that, great build.

@JohnDoe-ls2ww Жыл бұрын

Well done! Exactly what I need to do to supply my lathe with aluminum.

@Kamharam 5 ай бұрын

If you’re planning on melting cans or something, you’ll need to alloy it to get it to machine well

@saxon215 Жыл бұрын

Awesome work as always mate, but please chuck on some safer clothes for casting, steel cap boots as a minimum. I'm interested in the use of two part re-usable molds, try using a 50/50 mix of plaster of Paris and white building sand for these and see if you get good results. You'll probably still need to replace them eventually but it'll give you greater repeatability and less work compared to lost foam casting or sand casting.

@josefranciscof.rodrigues1575 Жыл бұрын

SENSACIONAL....UM GRANDE PROJETO ..E DE GRANDE UTILIDADE ..FORNO E FORJA .. JAÚ SP 🇧🇷👍🤗🙏

@SekAustria Жыл бұрын

Thanks

@henrikhv5084 Жыл бұрын

Be safe my freind, molten metal will hurt you bad (and I'm sure you allready know 😉). But other than that, great projekt👍, I really enjoy your videos.

@SekAustria Жыл бұрын

Thanks bro, i just realized it

@vilvakhitov5691 Жыл бұрын

Thanks for the vidos "METALLURG")))

@SekAustria Жыл бұрын

😁

@homemadetools Жыл бұрын

Great project. We shared this video on our homemade tools forum this week 😎

@Cavtrooper78 Ай бұрын

I’d like to see a video on the waste oil burner

@MCsCreations Жыл бұрын

Fantastic work, dude! Really well done! 😃 Stay safe there with your family! 🖖😊

@SekAustria Жыл бұрын

Thank bro! You too

@jonathananderson7329 Жыл бұрын

Love this

@Freizeitflugsphaere Жыл бұрын

Does the burner smell like burnt oil? Stinkt der Brenner stark nach verbrannten öl?

@SekAustria Жыл бұрын

Not at all

@perjalananwaktu72 Жыл бұрын

Mantap bro 👍🏼👍🏼👍🏼

@Trukba-er3we Жыл бұрын

Good, but How Big your compressor man ..? I Think better if reduce your ladle size, However it's Great Work, Good Job

@user-zp5tw1hl7f 16 күн бұрын

Bos.magkanu po.ganyan pagawa sayu

@Blxz 8 ай бұрын

Worthwhile repeating that the ceramic wool is horrific for your lungs, even while being heated. Anyone looking to recreate this needs some proper coatings on it before asbestos starts to look like the friendly uncle in comparison.

@johnli6736 Жыл бұрын

how much litter did you use to melt you aluminum?

@SekAustria Жыл бұрын

Less than 1 litter bro

@user-wx8rw4qe5f Жыл бұрын

Is it suitable to smelt gold, copper and iron and thank you ❤️

@Blxz 8 ай бұрын

His burner appears to melt copper pretty easily in the other video. Not quite sure it would get high enough for steel and the like. You'd need to confirm melting points for each of the things you want to put in. Do keep in mind that the outer gas canister is thin steel so you'd want to avoid going too hot.

@plap. 4 ай бұрын

Dude, never smack two hammers together like that. Just hit the plug, it wont send shrapnel like striking hammers together will

@SekAustria 4 ай бұрын

Thanks bro

@johnli6736 Жыл бұрын

Idol gano kadaming langis naubos mo sa pag tunaw?

@SekAustria Жыл бұрын

Less than 1 liter lang. Sa case ko kase di pa naka ready mga aluminum na nilulusaw ko kaya pinuputol kopa. Kung naka ready na siguro mas makakatipid kapa