I’m sorry the music is too loud and not very good. I am working on improving for future videos. Thanks for understanding.

Mate your project is mint but the music is shit and way too loud. I wanted to hear what you were saying but have to keep the volume down so I couldn’t

What truly matters to me is your willingness to share your work, which is your life. Thanks again, brother.

i am a retired Woodworker who did Commercial Architectual Woodwork installation and before that Residential Carpentry and trim installation eventually i wound up running the Architectual Woodwork Installation team for 20 years and at one point or another i’ve either bought or used a Contractor 10 “ tablesaw almost all brands use inferior motors and parts with lots of cheap plastic the only one i personally like and think is made halfway decent is The Dewalt which seemed to hold up best being used and abused on job sites as a common practice to help prevent damage to the tools and make it easier to clamp to stands and similar required workstations we typically bolted all our saws to a 3/4” Baltic Birch plywood platform so everything would work best on our saw stands out inthe field those plywood bases were oversized and very much added some additional protection and strength to all of our tools we typically protected the Veneer with a few coats of Conversion Varnish (satin) i like your Camper build , i’ve always wanted to do one myself one day but the timing hasn’t been right for me yet in the past i’ve gone with used Airstreams ?

We are watching all these videos! We are on this one at the moment!! It's so awesome to watch!! Great videos

I want to make one also. I’ve retired and just sold a Camper and have another I’m working on . But now that it cold I’m going to pull this little clam shell trailer into my garage , strip it to the frame and make the lightest trailer I can. We see how it goes. Good luck with you efforts

Me: one more video before I go to bed Me at 3am: *planning to build a camper so I can live in it and move whenever I can because I'm antisocial as hell*

My friend calls that magic smoke, that came out of your saw. I had a circular saw that did that, but it was in a rig to work as a table saw so I just changed it out. Enjoying your build !

Regardless of the music , or anything else, keep doing what you do....because if someone is looking to learn something they will, but most people will just be a bunch of Simon Cowells of construction but yet they cant do jack.

Awesome really want to make one , but for canadian winters

Man this is a stellar build, I am here getting ideas for my current teardrop camper build again

Hay Bud I am back to watch again as I am building another camper, I always rewatch video before each build so much fun

Great lesson. Thank you for taking the time and energy to film and upload. Much appreciated.

looks like a very nice start. Be sure to keep us up to date.

I just watched the hatch build. You are good at what you are doing. I'm done on KZfaq for the day and I'm going to start a new project

Really cool build, im definitely going to watch the rest. Got me feeling really inspired to build my own

Gives me hope for mine! Simple and doable. Most show the complete process which is a bit overwhelming. Thanks!

Cool build. Too bad I had to watch it on mute. Couldn't stand the music.

Like the 2×4 roof stout! I would go water seal coat on all exterior wood and treated wood and enjoy natural wood

This must be my favourites minicamp to build so far, I love it! :) ❤️

Dang dude those are some nice cut outs for the door and window, looks cnc cut, bravo

Very cool build, regular guy, regular tools, regular materials. Don't sweat the naysayers. This shows you don't have to be a "fabricator" with cnc this and 3d that to make cool projects. Ya, that music, lol.

Trying to draw up my own plans on constructing a trailer. I wouldn't recommend driving fasteners into the butt end of the roof joists, just something I've heard from experts on wood joinery. Keep up the good work man. It's not easy!

I'm really enjoying watching you do this build. Excellent work. One request: raise the volume on your commentary, and lower the volume of the music. Again, great job!

That table saw's stickers were rolling up on the edges. Did it get wet? High humidity area? That may be why it didn't last long. I totally get your thinking. I recently, reluctantly, bought a Ryobi router and table even though I'm a Dewalt and Milwaukee fan. But it's ripping lumber just fine so far.

Awesome job on the camper.

Good beets. Liquid nails is amazing. More on floor supports and how they attach to the trailer would be nice.

Love the build!!! Music was pimp made me want to go to a rave.

Looks like it’s coming along good ,, sure been thinking about building me a new one a little bigger .

Table saw issue was caused by putting it on a flat, unventilated surface. This prevents the motor in the saw from cooling itself. Don't operate one of these for extended times (ripping more than 1 or 2 8ft boards) unless you put it on an appropriate table. It will overheat... a better saw would have a thermal shutoff to prevent damage though.

An easier way to spread glue is buy it in gallon jugs and use a 3" paint roller to spread it. when you are done for the day just leave the roller in the tray and wrap it with a garbage bag. It will not harden until you need the glue again.

All you teardrop builders should know that lumber/plywood suppliers sell a plywood that bends very easily. Called "bender plywood ". Cabinet shops use it in custom rounded cabinets, etc. Comes in 3/8th by 4x8 sheets. Makes building that back door on teardrop campers much easier. No spring back. Great on that front curve too. On that classic teardrop, rout a 1/8 or larger depending on your ceiling material thickness, groove 1/4"deep just under the roof line where the ceiling panel goes. Both side walls. Before installing the back kichen wall, slide your ceiling panel into that Groove all the way down to the front floor. No gluing, nails or supports needed . Its bend will keep it up in place. Any flat ceiling area will need a few tacks . Easy peasy.! Happy building!

Great start to a great camper new friend my Texas brother

Nice nice job man, love it thanks

How are you going to clad it? I've been showing a few models, like Runaway, to my local jeep group. If I had capital, I would bring in 3 or 4 from Florida. If Florida wasn't so far away, I'd have one myself.

I was looking for so plans to build my own. It's really cool to watch the build!

Picked up some goods pointers for my build because of your build. Thank you.

Tip: use a bit holder on your impact or your drill, it will help hold your screws in place while you screw them in.

On my next build I used the west marine 2 pump epoxy and I love it. I will be posting that after I finish the current video's

I thought my camper was built strong as I used 2x3 and it looks like you used 2x4 studs that should be a beast. My next build I will stick with the 2 x 3 to save weight, drop by and take a look I did build mine 5 feet wide.

Looking forward to your next video.

I just have to watch again, this is killer and I hope to make my videos this good

keep the progress coming ! love the videos man

Great spirit - wonderful job. Bless you.

Great build!

hi I am on my husbands youtube so just want to say that I bought a home build a couple of years back and it pretty much did what yours did with the addition of black mold so tore it down and am working with my son when he has time to rebuild it by a plan this time. I want the solid walls like you are doing so have gleaned some good info for that from watching you do yours. Am excited to see your next step.My name is Paula.

Reach in and push the "reset" button on the motor after it cools off. Also a bit smaller blade puts a touch less strain on those chip made things. Also, I agree with the other 329 people, You call that loud noise MUSIC? We could live without it!

Great video.... thanks for posting! Music was over the top and unnecessarily..... but you've got the video and editing down! Thanks again and keep up the great work!

It’s looking great man

Love the music matches what your doin, keep up the work great job

very nice job and I learned about bendable plywood lol I never knew there was any thing like that lol

I really wanted to watch this but the music drove me away!

Love it, very good video. I want see everything to the end.Thank you for sharing this video!

OMG, the music ruins this video, I'm listening to you talk in a soft monotone voice then BAM the loud music knocked me back in my chair!

Great build one question where do you describe the floor or did I miss it great job thanks for sharing would like to build one for me and my wife

I had that happen to me on my Rigid table saw. It ended up just being the fuse.

So how did it come out? Any leaks or cracks after driving and using it? Any advice for someone about to try and build one?

I like the music and I am hearing impaired so it was the right volume:P

Great looking teardrop camper

Building one now. Thank you for the great video.

Awesome vid can’t wait to see it finished

Thanks for sharing. I don't at all mind the music. Great editing skills also my friend.

I've been wanting to enclose a trailer for some time .got a good.idea now .thanks

Did you check for a fuse reset button? I have a nice big table saw and I occasionally over burden i and trip the fuse. Wet treated 2x could have pinched the blade.

Thank you for making this video, I have no problem with the music either. But this video gave me the confidence to produce the floor structure that I needed and how to properly attach it to the trailer frame. I could not find anyone that had shown that process so I really appreciate you doing this period are there any other options for attaching the floor that you can think of?

AMAZING ONE🍻

Nice DIY great job so far! Can't wait to see the finished product!

Very nice job. I saw the first part. I thought you were using the thick spars to insulate after. But I've got it now. Not a fan of the music, but sounds like your addressing it. Some people do, those who don't critique. Keep on building stuff, looks like your good at it.

I really like this build 👌

I watched for the help you give on building. Not as a music appreciation spot. Damn nice work

Thanks for sharing your work 👍 Giving me lots of ideas for my own camper build. I'm in Australia 🇦🇺 and plan to use it in the summer months in out back Western Australia, it can get up to 60 degrees celsius 🤣 so ill be fitting a air conditioning system. What weight did the camper come in at? Thanks again

Yo, use robinson/torx. Especially if you're trying to do any one handed screwing.

I like the music. I had to laugh when he outperformed his saw.

Great video. Can wait to see more.

Your's and one other on YT are the most comprehensive build vids I have seen. I like you not editing out your mistakes and explaining preparation for future changes. I am adding this to subscriptions. NOW THE MUSIC. Nice, but over powering volume,; make the music subdued.

That's looking great. You've definitely given me the motivation to plan and build my trailer.

You are so impressive! Wow! I really appreciate your video and instruction. I stripped down my Dad's 93 Prowler all the way to the trailer. How did you do your trailer base? I am not sure how I should do mine. It has new wood on the metal frame. I just put it on last summer. I am getting ready to start again this spring. I am thinking I will need to frame the floor

Good job thus far!

I just discovered your channel and I really like the design man keep up the good work. If you really want a good tablesaw get a Dewalt tablesaw I have one and we love it

ow is the camper working out? Is there anything you would do different?

Nothing wrong with the music. Thanks for posting video

Loved it thanks for posting

Nice build.

It's a nice build. The music, you probably know by now that you can set it to like 25% when it's playing. CHEERS!

Great build. Still, have to turn up the volume to hear you, then quickly turn it down when the music blares.

Found it thanks again for sharing keep up the good work

I did not see any question about the inner dimension. May I know the measurement from height to width to length for a micro teardrop?

Like the video, wondering how much this thing weights? your using some heavy lumber, looks like yellow pine as compared to spruce a lighter wood, didn't see what you used to waterproof the underside of the flooring?

With smoke it did more than overheated. You could replace with a heavier motor from Grainger.

Nice looking build so far

Looking good thanks for the video.

I enjoyed the build so far. Would you in later stages add more windows and solar panels into the build

loved the build! and the music!

Great job.

Awesome job!

good video....I have a Dewalt and Ryobi table saw ...both great...use diablo brand blades next time....had mine for years of great cutting like you just did...treated wood too. I see that your blade shows darkness on blade tips...sign of needed blade change. Diablo!! thanks for your tips and such...good build!!

Thanks I’m thinking about building one my self this is helping me get ideas

If you haven't tossed the tablesaw those ryobi saws have a small capacitor that is replaceable for as little as $10 shipped.

You sawed more then I would ever think for a 10" 110v saw. Ya have to go 3X on price for a little better saw. Should of let it rest and get a rip blade for it. Nice video content, you probably already know about music editing by now.

Nice craftmanship, and unexpected but good music.