DIY Mirror Frame | Transforming an OLD Bathroom Mirror with a DIY Wood Frame

No video

DIY Mirror Frame | Transforming an OLD Bathroom Mirror with a DIY Wood Frame

Рет қаралды 32,546

Kayla Wilson

Күн бұрын

Пікірлер: 21

@bobbymarie8002 2 жыл бұрын

You put together 90 % of ppls bathroom... Kudo my friend!

@Kayla_DAY 2 жыл бұрын

Thank you! 😄

@iGoldeneYe 2 ай бұрын

Awesome! Thanks for sharing. Be safe.

@Weaton777 Жыл бұрын

That turned out great!

@Kayla_DAY Жыл бұрын

Thank you! 😄

@porkchop0711 5 ай бұрын

So much better ❤❤

@Kayla_DAY 2 ай бұрын

Thank you! 😊

@BN_28 2 жыл бұрын

Looks great! Just need to cover up that outlet 😅

@Kayla_DAY 2 жыл бұрын

Thank you! Haha you're so right!

@nikkishort3968 2 жыл бұрын

This turned out so well! It's beautiful. Just wondering if the backside should have been stained or painted? Are you able to see if off the mirror reflection? It doesn't appear so on the video, but wondered up close. I can't wait to do this!

@Kayla_DAY 2 жыл бұрын

Thank you so much! 😄 That’s a good point! Definitely something to check before installing. I just looked at mine and you can’t tell at all that it’s different. You can see some of the back in the reflection but it seems to have a consistent shadow casted on it making it look almost identical to the front grayish color. I think if the front had been darker it would’ve been more noticeable.

@proverbs31elpaso8 2 жыл бұрын

Looks beautiful just wondering how you dealt with the mirror clips. My mirror has two mirror clips on top and two on bottom.

@marieShealy 2 жыл бұрын

Wondering that same issue???? I’ve watched other videos on what they did but wanted to watch more to get other ideas.

@Kayla_DAY 2 жыл бұрын

Thank you! The clips on this mirror were flat enough to be able to just glue the frame right on top of them without a problem. If they had been bigger, I probably would have cut some sort of notch in the backside of the wood frame piece to leave room for the clip and allow the frame to be flush against the mirror. Also, we don’t plan to access the clips or remove the mirror anytime soon, so all the pieces are just glued on top. In a different bathroom, where we’ve installed a frame but still wanted to be able to easily remove the mirror, we used a more temporary adhesive on the sides with clips and stronger adhesive on the other sides.

@elinumar78 Ай бұрын

@@Kayla_DAY what type of more temporary adhesive?

@Ganks2434 Жыл бұрын

Is the top of the frame uneven because of the clips?

@nosedrain1594 7 ай бұрын

The frame sits about a quarter inch off the wall, right? (Whatever the thickness of the mirror is). That gap is obviously not visible along the sides and the bottom but is probably visible along the top. Does it look Ok along the top? A “real” framed mirror would have all its edges sit flush against the wall…

@actionjackson442 Ай бұрын

Who is looking from the top other than someone 7' tall?