This cheap, budget DIY homemade night vision camera scope is capable of recording in very low light thanks to Runcam Night Eagle 2 Pro FPV camera. It can be used in many scenarios, even for night expeditions, animal hunting or dashcam for recording the night footage. It uses FPV drone camera and monocular near-eye display.
The camera consists of mainly 4 components:
- Runcam Night Eagle 2 Pro FPV camera
Banggood: bit.ly/2Z6gk7c
Amazon: amzn.to/3rE7quk
- Near Eye Monocular Display bit.ly/2NjfpOp
- my custom electronics for powering and connecting everything together (can be also done without it - see the link below for full how-to instructions)
- optional DVR recorder for recording what you see (otherwise it works just as a scope)
FULL STEP BY STEP HOW-TO INSTRUCTIONS:
www.instructables.com/Night-V...
0:00 Intro
0:28 The Components Used
0:55 Designing Schematics
1:16 PCB Design
1:45 Enclosure Design
2:12 3D Printing
2:58 Soldering The PCB
3:22 Crimping The Wires
4:05 Putting It All Together
5:08 The Finished Night Vision Camera Scope
5:23 Testing The Camera in Darkness
6:03 Performance Comparison to Smartphone Video
6:32 More Testing In The Dark
7:16 Channel Outro
***********************************************************
If you like the video, you can buy me a coffee here :)
www.buymeacoffee.com/JTMakesIt
***********************************************************
I hope you enjoyed this video.
And SMASH that LIKE button! It helps a lot!
BUT DO NOT CLICK THIS - bit.ly/2BYOIoR
Subscribe for more and tell me in the comments what you like the most or what should I create next.
Follow me on Facebook and Instagram
/ jtmakesit
/ jt_makes_it
for spoilers on what I am currently working on, behind the scenes and other extras!