DIY Nissan Patrol Makeover for under $1,000! Raptor coat IN THE SHED + How to fix and stop rust

Рет қаралды 322,054

2 жыл бұрын

1000 PRIZE GIVEAWAY at www.snatchclothing.com.au - you could even WIN A TRIP with Shaun & Graham!
Jocko's back with the cheapest GU we could find and the transformation has begun! In this build ep we've removed the whole interior to install Dynamat sound deadening to keep the cabin noise down and heat out, we've sprayed the whole thing in Raptor coating, installed a brand new UHF - and Jocko's even snuck some 33 inch muddies under it!
EPIC 4WD deals: www.4WD247.com/
If this was your 4WD, what would you do next? We've still got upgraded suspension (did someone say patrol lift kit?!), a basic 12v system and a whole lot more to come!
________________________
Our Essential 4WD Gear:
________________________
4WD Wheels: dynamicwheelco.com.au/
Jocko's UHF Gear: oricom.com.au/deals/
Jocko’s nav system: www.audioxtra.com.au/
Jocko's Offroad Tyres: www.mickeythompsontires.com.au/
#Offroad #4x4 #overlanding #4runner #4WD247

Пікірлер: 294

@paulclarke4431 2 жыл бұрын

Raptor can be tinted with any 2pac colour, so we're going with... Primer. Looked better in red, dents and all. 4b's should be fun, don't be afraid of colour!

@oskardavis7649 2 жыл бұрын

I agree mate, best thing I ever did was repaint my gq patrol that’s a two tone red and gold the same colour over going raptor Was much cheaper and looks much nicer

@dalesmith4985 2 жыл бұрын

won't matter what color it is when Mud gets on it lol, just keep it dirty

@oskardavis7649 2 жыл бұрын

@@dalesmith4985 hahah not wrong, I live out in the country so it’s very dirty all the time. Just repainted cause some stickers from previous owner ruined the paint so had all these faded company names all over

@braydonsnell8791 2 жыл бұрын

100% bud, I'd have dents and clear coat peal with any factory gloss colour over a straight raptor coat any day, looks shithouse to me but that's just personal preference

@timothyherweynen6210 2 жыл бұрын

Yes disappointed in the colour

@agentcrm 2 жыл бұрын

That guard needed to be removed so it could be repaired, the inside is going to keep rusting. Would have been really easy to cut out and repair properly.

@larcore1 2 жыл бұрын

Jocko is srsly the best presenter, more of his stuff pls

@Kliiqx_TTV 2 жыл бұрын

100% agreee

@varunsudama 2 жыл бұрын

I agree. More Jocko content please.

@ccmogs5757 2 жыл бұрын

Like father like son :)

@johanneskloppers8937 2 жыл бұрын

We can all get behind this idea! He's very knowledgeable and perfect for the job 🤙🏼

@BIGPCE 2 жыл бұрын

Just fyi guys, this is Jocko’s YT account 🤣🤣

@Seymp 2 жыл бұрын

You guys and MCM are really crossing over. They are calling themselves the ‘best 4x4 channel’ and your buying the cheapest, sight unseen on the internet… love it.

@bigunit4122 2 жыл бұрын

Collab time???

@davidfurulyas2685 2 жыл бұрын

They bought the gu months ago jocko went and looked at it was a whole episode

@kickinon 2 жыл бұрын

finding a td42 ute now for 11k is near impossible lmao

@chelssasouthep7035 2 жыл бұрын

Mcm said theyre the best 4x4 channel as a joke lol

@nathanwalsh2757 2 жыл бұрын

@@chelssasouthep7035 obviously

@scottbeattie6645 2 жыл бұрын

Thanks so much for sharing great tips for those of us on a tight budget. Looking forward to future DIY videos

@4WD247 2 жыл бұрын

You're welcome mate 👍

@stfitz19 2 жыл бұрын

Your guy there just bandaided that rust on the front fender it’s going to continue to spread under that body filler. He may have done a good job cleaning up the rust on the outside of the fender but the underside of the fender is still untreated and more then likely that’s where the rust has started from. The correct procedure is to cut out the affected area and weld in a patch panel. Not to mention that since you applied raptor liner once it’s applied it’s almost impossible to blend in a repair without experiencing weather fade so it’s very important to do the body work correctly the first go around. Replacement of the fender may have been the better idea in this case.

@jamezxh 2 жыл бұрын

I thought the same thing . That area of the wheel arch is pretty prone to abuse

@tardywombat9513 2 жыл бұрын

It’s ok! They raptor coated it so it’s junk anyway.

@blowinkk9396 2 жыл бұрын

Exactly what I said. Nothing but a waste of time and money. No way "Robbie" is real body man, If he is please tell me the shop he works at so I can stay away

@stefano_nmd 2 жыл бұрын

i wouldnty have bothered and just gotten a new guard tbh AHHAHAHA

@tredder4help 2 жыл бұрын

Crazy theory, maybe they checked the fender and didn't see any other rust so they came to the conclusion that body filler would do a good enough job.

@googleuser2170 2 жыл бұрын

A great Father/Son project as proved by Graham and Jocko.

@that_crankytf9571 2 жыл бұрын

Is jocko grahams son?.

@googleuser2170 2 жыл бұрын

@@that_crankytf9571Of course, that's why Jocko always lets his dad drive his d-max on all the adventures.

@ApexHerbivore 2 жыл бұрын

@@googleuser2170 lol

@pkatsigris 2 жыл бұрын

no matter what kind of project or budget you have , if you have good friends to give you a hand the result will always be magnificent.

@nofliesonmyback8623 2 жыл бұрын

You guys need to start making colour coded or just coloured Raptor Coating so dont have that grey primer looking finish 😎 Love these kind of vids just as much as the ones out on the tracks 😎 Nice to see the use of products that may not be aware of.

@TehTrixxable 2 жыл бұрын

Usually hate look of raptor coat but this looks mint

@r1017397 2 жыл бұрын

Been hanging out for another video, good work lads!! Great to see you're putting the cost break down too

@Paul.Reid123 2 жыл бұрын

Been thinking about doing the sun damaged Jk Wrangler. I believe you convinced me

@craigquann 2 жыл бұрын

Clean, purpose built and utilitarian. I love it. Nice little rig.

@KoonceLyfe 2 жыл бұрын

Best off-road content on the internet. Cheers dudes!

@jag131990 2 жыл бұрын

Good job proving you can do these jobs in your own shed with all the free expertise labour. It really is as easy as that boys and girls

@MrMegafly2011 2 жыл бұрын

I can’t wait to do this entire process

@tomandhistruck 2 жыл бұрын

I always love seeing Grahm heavy tech videos! He makes it seem like so much fun! Also, more Jaco in the videos, please :)

@au3fek695 2 жыл бұрын

Awesome stuff guys keep it up

@adventureoverland9044 2 жыл бұрын

Nice to see that you are running on the Mickey Thompson tires! I run them for 9 years now, I just ordered the new set for my Patrol.

@chappo4845 2 жыл бұрын

When I sit down and read a magazine I think I want the newest and best truck. Then I watch something like this and realise you can make any truck great. Especially if you do it yourself. Great job!

@NickMango 2 жыл бұрын

Jocko with the Sesame Street joke. 👌👌

@chickenistrexlastname1331 2 жыл бұрын

Update on the pony, Gramh Old patrol, Farm truck.

@rshutterbug47 2 жыл бұрын

That's A Really Nice Truck Now & It's Going To Be A Proper, Weapon 👍

@spannersautoandcomputerser1649 2 жыл бұрын

In addition to welding, 3m panel adhesive works great!

@glensubtorq 2 жыл бұрын

That looks awesome! Well done 👍😎

@Dags470 2 жыл бұрын

OK. Jocko is now my favourite. Anyone that does an impression of "The Count" is OK by me. 🤣

@philsymons9614 2 жыл бұрын

Jocko is awesome, his enthusiasm as he is talking about whatever he is doing is epic.

@tennesseethompson5287 2 жыл бұрын

Totally agree Darrin, Jocko explains things really well, Graham should slow down on the crystal meth & coffee!

@njrx7t2 2 жыл бұрын

"You can do it yourself in your shed.." Then he brings in an expert.. 😁 Awesome video n nonetheless! 👍🤙

@tennesseethompson5287 2 жыл бұрын

Bahahaha YESSSS Senor Anya Metten, and not to mention 5 or 6 helpers😀

@Sphyx- 2 жыл бұрын

Awesome! Would love to see you guys come and take on some of the tracks in Wallaroo state forest.

@haydenthun3787 2 жыл бұрын

That red that didnt get painted looks so good with that grey 👌

@davidbolt3412 2 жыл бұрын

Looking great Andie!

@hicksy1981 2 жыл бұрын

you guys need to look at the buzzweld kits! you won't get better. Keep up the awesome content, love it

@srgsarge8553 2 жыл бұрын

Who was the body worker on the front right headlight?! He added that body line perfect. Great Work!

@Joftaky 2 жыл бұрын

That looks epic, well done boys!

@bretgooding5774 2 жыл бұрын

The best in the business 🇦🇺

@graysonsfarminglifeaustral2778 2 жыл бұрын

Thanks for the helpful tips.

@Sloggett1000 2 жыл бұрын

You make this seem so much easier than I ever thought it’d be

@TheShooter466 2 жыл бұрын

That's cuz it's KZfaq lmao

@johanneskloppers8937 2 жыл бұрын

Always the best content 👌🏼

@4WD247 2 жыл бұрын

Cheers mate!

@danielsundberg1977 2 жыл бұрын

Graham, the Don Burke of 4wding, an expert with the experts behind the scenes ;-) :-P

@shagmesilly78 2 жыл бұрын

Looks great. Very surprised you didn't give the bullbar a coat of Raptor too. Would have really set it off in my opinion!

@tredder4help 2 жыл бұрын

Or even just a fresh lick of paint

@timma9758 2 жыл бұрын

I Iove the video of the boys doing tassie in the snow

@juliandean8787 2 жыл бұрын

Can we name this rig BRENDA 👌 Pull up to a big hole and everyone yells SENDA BRENDA!! YEEEEWWW

@simonetaylor7286 2 жыл бұрын

That’s good to hear and what’s the plan for the G60 I love watching 4wd 24/7 it the best 4wd show on KZfaq and you boys are the best 👍

@ccmogs5757 2 жыл бұрын

12:33 "I"m gonna give it a little polish before i put it in there though" Graham Cahill 2021

@adrianjay1972 2 жыл бұрын

Love the DIY vids! Great work and that Patrol is sick! I need these trucks here in Canada!! This and the good Landcruisers too! Haha Cheers!

@rjl110919581 2 жыл бұрын

thank you for sharing the video

@GoatOffroad 2 жыл бұрын

If Graham is Jockos dad…..I’d like to see what the mom looks like! 🤣

@stuartkcalvin 2 жыл бұрын

Jocko was born off his Dad's back.

@rockynrolling6206 2 жыл бұрын

Usually love your work boys, but that's one way to ruin ya perfectly good GU

@brianhaw9398 2 жыл бұрын

It would cost me almost that much in beer to have my buddies come over and work for a weekend!

@mayo8029 2 жыл бұрын

I see Jocko, I click. 👍

@Josh___d___G 2 жыл бұрын

I'm actually looking at gettinng a budget patroil (td42) so this really helps!

@joshculling5852 2 жыл бұрын

welding in a new patch is the only way to fix rust, anything else is just temporary

@johnmccarthy2758 2 жыл бұрын

Its a fender they smash it anyway

@lukeburges7487 2 жыл бұрын

Thanks for the tips. When you sand back a spot of rust on a panel, what about getting to the inside of it? That can be really tricky to get to, is it just as important?

@rocknrollajohnnyquid876 2 жыл бұрын

Damn! ol Graham is working today

@jeffparryncc1701 2 жыл бұрын

7:56 This is a MUST DO!! Don't skimp on this step.

@martinravina6934 2 жыл бұрын

Good stuff guys! Maybe you can check with the raptor guys but I was told that raptor texture where the doors closes of the doors is not such a tight seal with the rubber seals. I was planning to do mine with the same colour with regular automotive paint for that matter for the times I'm playing submarine. If you could please clarify this would be grand. Regardless good on ya for going the extra mile and not leaving that red! The engine bay can be done when engine swapping for a 1HZ? 😂

@redjellyarmy3097 2 жыл бұрын

Loved it

@rileyb2639 2 жыл бұрын

Thanks for sharing such great tips

@AnimalFriend969 2 жыл бұрын

I understand it’s not ideal to put a fresh raptor coat out in the sun but if you don’t have access to a shed or garage is it possible to do the entire process in the driveway and still have it turn out good?

@duujo 2 жыл бұрын

Jocko, that Sesame Street reference didn't get past me! Some things just get stuck in our head and live their forever. :P

@shanebabington1342 2 күн бұрын

That's my old man's old ute. 🙂 It was cheap, but I sold mine for even less.

@micktaylorwolfcreekmechanical 2 жыл бұрын

slow is smooth, smooth is fast same thing i tell the kids when teaching them to change gears when they on there learners

@lelouchlamperouge4273 2 жыл бұрын

This is an example of why YT is still good.

@ondrejmarko01 2 жыл бұрын

Wow. Adding that dynomat and not even clean it underneath properly. How good is that?

@davidball. 2 жыл бұрын

Long time in the waiting for this Gu ute. I thought it was given up on.

@jme2716 2 жыл бұрын

Love your work Gents 👌🏻 Hey Graham, noticed that you got a few pieces of ink, are there any that you are particular proud of?

@nedyahyakcam 2 жыл бұрын

The biggest difference you can make to the comfort if a car in a hot place is dynamat on the floors and roof and window tint, noise is annoying but heat is brutal

@stockrok_3202 2 жыл бұрын

I’d love to be able to do that

@jamezxh 2 жыл бұрын

You forgot the 5 Boxes your mates are going to drink while helping .

@keggaz9988 2 жыл бұрын

The best 4x4 show on KZfaq

@4WD247 2 жыл бұрын

Thanks mate!!

@fsbwgaming4619 2 жыл бұрын

2nd best...

@cmadventures6077 2 жыл бұрын

Come on baby.... The lucky blue flanno I just bought is my golden ticket... 🙏🍻

@EricaMTB 2 жыл бұрын

Remember to raptor coat your Patrol after you have been camping in Wonnangatta.

@demivincent6555 2 жыл бұрын

Supeeeeeeer video 🔥🔥🔥

@lukexploration1446 2 жыл бұрын

Do you guys rekon that I could raptor coat a motorbike?

@bullzye101 2 жыл бұрын

awesome stuff guys .. yeh ive got my toyota surf hi-lux with raptor yeh its the best stuff you can get awesome stuff luv mine ...yeh ive got check out that dynamat looks good stuff ... but big thumbs up

@lukerobinson8843 2 жыл бұрын

with the rust hole u cut out go get the pabco brushable hydroseal it waterproof and seal the metal so it doesnt rust anymore

@simonetaylor7286 2 жыл бұрын

Side bars and side steps will make the big GU a beast and what is happening with the Y62

@4WD247 2 жыл бұрын

More on both patrols coming soon mate!

@jetset8888 2 жыл бұрын

Should’ve done a decibel reading reading before and after dynomat

@lsswapped80 2 жыл бұрын

What around about PSI where y'all spraying at to get that finer texture?

@Sergei-King 2 жыл бұрын

I clean mining equipment for a living (Triple Megas & Quad Megas especially) I wash shocked at your cutting technique with the pressure washer hahahaha.

@hugobaker3293 2 жыл бұрын

Nice colour

@willsmith7411 2 жыл бұрын

Thought it would be this easy haha 8 months later should have the 80 done over Xmas

@brentwhitney9725 2 жыл бұрын

So your leaving it in primer?

@nickeade 2 жыл бұрын

Just seen the “no finner than” 👌👌

@anthonypeachey21 2 жыл бұрын

Mits alloy rear body would fit perfectly and give the storage required

@xcub54 2 жыл бұрын

Boutta say, is there another episode on building this GU cause I can't find it

@noodleoce9986 2 жыл бұрын

Just ordered a full send shirt, fingers crossed!

@4WD247 2 жыл бұрын

Good luck mate!!

@promxrippa 2 жыл бұрын

Good 2 see you getting your hands dirty graham

@Swwa89 2 жыл бұрын

Wow we were just saying the other day how nice and quiet my gu is inside the cab compared to outside the car although mines a fair bit newer and Wagonso perhaps they improved factory sound deadening in later years. Had to laugh about putting that in then chucking on a set of very aggressive howling mud terrains

@Connor_Harris 2 жыл бұрын

Cool i will do that to mine i need a sander

@Jack-qe3ux 2 жыл бұрын

A nice car mate Good gu ute

@halidaymichael2899 2 жыл бұрын

Simply bogging isn’t a long term strategy. Plus, body filler can crack in situations like exposed edges. It’s such a small repair that I would had cut it out like the floor. Use a high quality weld through primer and a seal coat. If you’re adding more than a small skim of filler, then you haven’t repaired it properly.

@einfelder8262 2 жыл бұрын

It's under the flare, so doesn't matter. Didn't see the rust being treated on the inside of the guard, either, so it's going to keep creeping. It'll take another 15 years before it's a problem, though.

@halidaymichael2899 2 жыл бұрын

@@einfelder8262 I wouldn’t been keen to bet on that repair lasting 15 years. I professionally restore Ford and Mopar muscle cars, have done for more than 30 years between other careers. Doing it once right is always better.

@tardywombat9513 2 жыл бұрын

The raptor will hold all the rust and bog in place

@jheybiejimlani3932 2 жыл бұрын

hi from Philippines 🇵🇭

@AshWhittaker25 2 жыл бұрын

How much primee did you use? What would be. The total cost?

@jyeriedl8484 2 жыл бұрын

Wish i owned a GU just to sell it and make money off it with these videos coming out🤣

@manfredsontag8249 2 жыл бұрын

so with the tintable pack, you can make it any type of colour you want if you go to the paintshop, or will it be a little bit diffrent than the coloured pain you buy ?

@VideoShowMeHow 2 жыл бұрын

Probs a bit of respirator action when sanding might be the go lads?

@marksomerset3380 2 жыл бұрын

I would of cut all the rust out but please count me in for a trip I'm a keen 4wder

@deanoc5209 2 жыл бұрын

-so i can raptor coat my 4b in 2days? when are the boys from raptor available next? haha awesome idea to do a budget video but be realistic with who you get to help.