DIY on How to Make A Chum Tube

DIY on How to Make A Chum Tube | ChumTubing

Рет қаралды 17,862

3 жыл бұрын

If you partake in either dock, bridge, or pier fishing; you know how important it is to chum. Years ago and like many people, I would buy a chum bag that would usually get tossed after its first use. They’re usually difficult to clean and the smell never fully comes out of them.
So I did some thinking and came up with making my own chum bag (Chum Tube) which I made out of PVC. The first model worked great, but it had areas for improvement. So I made those improvements in my 2nd Generation design and as of yet, I have no issues and complaints. And because of that, I’ve decided to share with you how I make this model of chum tube.
This isn’t THE WAY of making a chum tube, this is just A WAY of making a chum tube. I hope this video helps you and until next time, TIGHT LINES!!!
~~~~~~~~~
⛔️ DISCLAIMER ⛔️
I am currently NOT sponsored by any brand and/or company of any of the product(s) mentioned in this video.
~~~~~~~~~
🎼 MUSIC 🎶
Intro Audio Sound Clip:
Tubthumping by Chumbawamba
• Chumbawamba - Tubthumping
Outro Audio Sound Clip:
Goodbye For Now by P.O.D.
• P.O.D. - Goodbye for N...
~~~~~~~~~
🙏 THANKS 🙏
Thank you for taking the time to read this and watch this video. If you have any tips or positive feedback which you would like to share, please comment below.
~~~~~~~~~
💻SOCIAL MEDIA📱
If you absolutely LOVE fishing and nature, but also love cool and geeky stuff and you don’t mind some periodic randomness... then you should TOTALLY check out and follow my social media accounts.
⬇️⬇️🏃‍♂️🩴🎣⬇️⬇️
Facebook: runninginflipflops
Instagram: runninginflipflops

Пікірлер: 21

@patrickrossi7279 3 ай бұрын

Good one bra ! I just told my friend that I would make him a chumbo. Muchas Gracias amigo

@francoisfouche2568 2 жыл бұрын

Very similar to what we use on our boats in New Zealand. Ours are about 600mm long, not so many holes to make it last longer, we add about a 5kg disc of lead weight to the bottom and a large stainless "swivel knuckle" to the top as the current spins it terribly and it twists your rope. We need to add the weight to get it to the sea floor, anything from 6m to 100m deep hence fewer holes and the larger size ... hell of a job to refill it. Works great.

@runninginflipflops4709 Жыл бұрын

I’ve mostly used this for bridge and pier fishing. As for the rope twisting, I haven’t experienced that issue, however, adding a swivel does sound like a great addition in the design for the stronger currents. I have added weight to it in the past, but I rarely go over a half of a kilo.

@Captain_Clark_CDoryAdventures 2 жыл бұрын

This was like learning the best methods of making a chum cage from a Kung fu master(as your words and lips didn't match). This satisfied a few needs with on video. 👍👍

@423alonso Жыл бұрын

Great video i do trust the cement myself awesome design God bless....

@ProjectReel 3 жыл бұрын

Great DIY 👍🏼 Pretty easy to make. Love that you used a bigger pvc diameter to fit more chum in there.

@runninginflipflops4709 3 жыл бұрын

Because of the wider pvc, it’s super easy to clean. Once you empty the tube, you dunk it in the water 1-2 times and it’s completely clean of chum chunks and residue.

@DIXONLINE 2 жыл бұрын

That was pretty sick dude and it really looked nice. Looked nice enough i could imagine it being on a store shelf without it looking like a diy project. I may give this a go in the near future. awesome video brotha!

@runninginflipflops4709 Жыл бұрын

Thanks!!! With the same design concept, but with a longer pvc pipe and smaller holes; you can make a live bait torpedo for kayak fishing.

@bigrich6750 Жыл бұрын

I like it!

@mastanifoxi2 Жыл бұрын

Great 👍👍👍

@davidrasmussen2975 Жыл бұрын

Why not put dive weight or concrete in one end and drop to bottom to attract snappers?

@runninginflipflops4709 Жыл бұрын

You can certainly do that. This isn’t THE way, it’s just A way of making a chum tube. I designed it to have some flexibility and periodically, I’ll put some weight inside of it.

@toddstowe8494 Жыл бұрын

Have you considered a SS U bolt for the top to attach the cord?

@runninginflipflops4709 Жыл бұрын

I did when I initially started thinking about the design, but in the end I decided to make it without any metal hardware.

@joescit Жыл бұрын

do you have the nameof the artist of those illustrations behing you?

@runninginflipflops4709 Жыл бұрын

His name is Terry Mann and he went by the name of Gxnie. Unfortunately, I think he may have deleted his website, instagram account, and Etsy account. His Instagram account was @official_gxnie and I believe his Etsy account was “gxnie_store.”

@runninginflipflops4709 Жыл бұрын

I found the artist’s Etsy account for you. He changed his account’s name that’s why I couldn’t find him. However, it still looks like he deleted his social media accounts. Here is his Etsy account link: www.etsy.com/shop/HookHeads?section_id=21779219

@joescit Жыл бұрын

thank you very much!