Thank you, and thanks for watching.

Thanks, I’m very pleased with how they have turned out given I only have limited tools and skills 😂. That’s the trouble when I see something and look at what I have gets me thinking can I improve things. Thanks for watching and subscribing much appreciated.

Thanks for watching much appreciated.

Thanks, I have tried to think out what needed improvement after changing the use of the drawers and hope I’ve got it covered now. The aluminium I had on the original setup did a good job of protecting the top edge so I chose to add it to the drawers. I think it looks much better and as you say is functional too.

Thanks 😊

Thanks, I drilled a second set of holes on one of the slides to give alternative mounting points. Then used large screws to fix them in place. I tried the bolts going through but there is very little clearance for the slide to pass so they were catching on the one side. The screws are the largest I could use and not have clearance issues with the slide. I also used a number of them to ensure a good strong fixing. Thanks for watching and commenting 👍🏻.

Thanks, I ordered them from eBay here’s a link to the ones I bought www.ebay.co.uk/itm/203892687981?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=phqTwe0WTEm&sssrc=2349624&ssuid=VpZcwKQnTKm&var=&widget_ver=artemis&media=COPY

Hello there. The main drawer sliders are 48 inches/120cm long, the worktop slider is 24 inches/60cm long.