This is the best veining I've ever seen!

Painting my kitchen cabinets and I so want to do this to my countertops. Looks great inspired.😊

Honestly, i did like the process but the end was GORGEOUS

Use stone coat countertop! Their Art coat has a lot of UV protection in it! And they say use a torch! You did an amazing job with your paint finish! It is beautiful!

You did a great job with the veining and color of the countertops. Beautiful!

They came out Beautiful

This is the best job I have seen! I am using your pattern in my kitchen. Maybe the chalk paint reacted and gave off gas like vinegar and baking soda type think since chalk is calcium carbonate and calcium reacts even with water. It looks beautiful regardless.

I used this same product in my guest bath and did have a few bubbles, but I also had an issue with my shirt hit the epoxy while wet so I sanded over and re did the epoxy and love it! Doing our mast bath now.

You did a great job.

You did an amazing job!

Looks great.

They're beautiful. I love your kitchen!! You did an awesome job!! Thank you for sharing.

Wow it looks great!

Love, love, love it! ❤️👍 You did a very good job. Thanks for all the great advice and tutorial, awesome job.

This is the best video I've watched yet on this. You explain so well. Thank you!!!!!!

Wow! Amazing...

Wow 😊

You made a great job of this - don't be so hard on yourself it looks beautiful 😍

🙋‍♀️🫶🏻Greetings from 🇨🇦 Thank you for your honesty! They are beautiful Hope to see how you make out on removing the bubbles

Hi, great job I did all my countertops in the kitchen and bathrooms with stone coat epoxy. I also had bubbles ( not a lot) however when I sanded down the countertops a week later, I used the Stone coat topcoat. now you don't see any bubbles or imperfections. The top coat is the seal to long-lasting countertops.

I’ve used them for years and they are a great company. What you need to do is lightly sand the area and re epoxy and use a blow torch are just a small kitchen torch and it will pop the bubbles out. It looks great what you did and those bubbles are very easy to get rid of. Give us a update on what you do

Looks great as far as bubbles you have to be very careful when you mix not to pull the paddle out of the epoxy as you are mixing that will draw in air. Before you use the epoxy put the jugs in warm water for about half an hour it will help it flow. You can sand it now and put a flood coat over what you have that will take care of the problem you have now. It looks so nice it would be worth the effort to just finish what you have done it looks great. The cabinets look great too !

This is a great tutorial. Your countertops look like real marble. I wonder if the lacquer had anything to do with the bubbling?

They look great. Sorry about the bubbles. I’m planning to do my countertops in a similar way. I was going to go with Giani but your experience has me reconsidering.

Beautiful job. Thank you for all of the details - how is it holding up?

Beauuuutiful

I've watched a lot of tutorials on counter top and venetian plaster, faux stone over the last year to prepare for my projects. This was probably my favorite. I gathered lots of inspiration and more confidence from your video. The feather was brilliant! Thank you! I was wondering if the primer that each seller recommends for their epoxies may help remedy/seal the gas from causing bubbles (gases from the counter material, or paints used?). I haven't been able to determine the importance of brand specific primers yet.

They look amazing. Thanks for sharing! (side note: what kind of foundation make-up do you use?)

It's just beautiful. I want to do mine like that. My kitchen is small so it should be a lot easier. However, I don't think that I would use epoxy. Thank you

This is sooo unfair!😭😩 it turned out so good and real!! Do I have to be an artist to make it this good?? Im so scared to start mine🥲

How did you get the ideas for the veining? I made mine to large

Did it hold? I’m thinking of doing something with mine

Good job on the countertops. Are you happy with painting the cabinets? I want to paint mine but a little apprehensive. I will look for your video on painting them.

Did that area have eight epoxy & did you use alcohol before the heat gun? The alcohol can help release the bubbles….

For the bubbles us a heat gun or hair dryer after pouring but before it cures.

I just watched a video for their new gold marble and on the video it states "do not use heat gun" so im not sure if the heat gun is the cause

Your counter looks phenomenal! You did a fantastic job. Can you help me%)....lol. Will you please clarify, you said you did the base coat and then a layer of ??? did you say a clear coat? If so, what kind of clear coat? Poly?

I am guessing the issue with the bubbles was because of gases. Paint usually has gases, and releases them for up to 24 hours after being applied. If you applied the epoxy less than 24 hrs after you finished painting, the paint was still off gasing.

You have to use torch to get rid of the bubbles after pouring ....

How long did you wait after painting to apply epoxy? The gases come from the paint.

Giani does say not to use heat on their epoxy.

My God you did AMAZING!! It's beautiful. What happened with the bubbles It's nothing, just sanded with 120 grit and use Stone Coat Epoxy, it's an excellent product, I've use it before and is easy and very durable, just look at some of their videos... again well done!!

0:13: 🎨 Life update on family and kitchen renovation, including a new addition to the family and ongoing DIY kitchen project. 3:32: 🎨 Transforming countertops with chalk paint and epoxy for a durable finish, including tips for application and drying time. 7:42: 🎨 A detailed list of tools and materials for painting countertops with chalk paint, including brushes, feathers, and paint samples. 11:38: 🎨 Techniques for creating natural-looking veins on painted countertops using a stippling brush and adjusting the thickness and direction of the veins. 15:13: 🎨 Tips for painting countertops with chalk paint and applying epoxy for a professional finish. 18:38: ⚗️ Disappointment with epoxy countertop bubbles, seeking alternative options, overall satisfaction with faux finish and color. 22:06: ⚒️ Feedback on using epoxy for countertops, including marbling techniques and future plans for improvement. Recapped using Tammy AI

What's ur lipstick color 😍

Can we have an update as to how your counters held up?

Prime 1st Then paint

I also called them and their customer service was amazing. Sorry you didn’t get that from you.

Do you live near VA??? Can I fly you to my home to do my ugly countertops??? Your countertops turned out absolutely beautiful!! And great tutorial! Thank you it was so helpful! But would be even more helpful if I could pay you to do mine lol ❤

So did you use alcohol or water to spray over veins to feather them out? Is Ann Slone paint chalk paint? Im assuming since you did the epoxy over it wouldnt really matter what paint?

Are you still happy with this? Do you have any chipping or scratches? I'm thinking about doing this. Thank you.

heat gun will pop bubbles on epoxy

Did you ever fix these countertops?! How are they holding up now?!

Stonecoat is the superior epoxy. I wouldnt use anything else. Its a one to one ratio. Food safe. Any time u use paint on countertops and then use epoxy, u must wait at least 24 hours for paint to off gas. If u use Stonecoat undercoating u can wait just 4 hours. Hope this helps u.

The paints & lacquer need to off-gas before applying epoxy. Your countertops are absolutely stunning.

Before doing this, everyone should know that epoxy will turn yellow. That woud definitely spoil the look of a white counter. One woman said her white marbelized countertop turned very yellow in three years.

I used the pour epoxy that self levels and would NEVER use it again I had to buy new counters. The epoxy drippings were difficult to prevent off the sides. I followed instructions to a tee NEVER USE IT!!!

You'r paint that you used was the problem. It needed to off gas at least 48 hours before you apply epoxy,

Ummm, ummm ummmm

You could of talk less and just get to it. Just saying

Looks great.